Workshop on TCAD & HSPICE

shilpiElectronique - Appareils

27 janv. 2015 (il y a 2 années et 6 mois)

862 vue(s)

It gives me immense pleasure to inform you that Department of This workshop will give hands-on experience on TCAD Sentaurus & HSPICE tools .Both the tools are industry versions EDA tools by world’s leading EDA Tool Company Synopsys. TCAD simulation software is used for development and optimization of semiconductor device structures. In order to provide accurate simulation results for a wide range of device technologies based on various material systems, a physics-based approach is employed. This workshop on TCAD will give an overview of virtual prototyping of device concepts, optimization of the devices, knowledge of physical understanding of device behavior and intuitive graphical interface. HSPICE is General purpose analog circuit simulator used in IC and board-level design for check of integrity of circuit designs and prediction of circuit behavior, developed at Electronics Research Laboratory of the University of California, Berkeley. HSPICE simulation is industry-standard for verification of circuit operation at transistor level before manufacturing This workshop will give the basic idea of description of circuit elements (transistors, resistors, capacitors, etc.) stimulus and connections by netlists,various analysis,curves plotting and analyzing the outputs.

SIR PADAMPAT SINGHANIA
UNIVERSITY, Udaipur
Approved by the University Grants Commission (UGC)
under section 2f of the UGC act 1956
Organized by
Department of Electronics
& Communication Engineering
SIR PADAMPAT SINGHANIA UNIVERSITY
N.H. 76, Bhatewar, Udaipur, Rajasthan - 313601
http://www.spsu.ac.in/
Two Days Workshop
On
“Technology CAD & HSPICE”
(Modeling, Device Design & Simulation)
February 19-20, 2015
Coordinator
Dr. Shilpi Birla

Convenor
Dr. Amrit Ghosh
Head of Department
VENUE FOR WORKSHOP
Workshop will be held at VLSI LAB, Lab block,
SPSU.
REGISTRATION
Candidates should complete the enclosed registration
form, and send it by mail or fax to the Coordinator.
Confirmation of eligible candidates will be on a first
come first served basis up to a maximum of 30
candidates.
The coordinator should receive the completed
registration forms by February 15, 2015.
FEES
Student: Rs.700
Faculty Members: Rs.1000
Industry Person: Rs 1500
SPSU S
tudents: Rs 50
ELIGIBILY
The workshop is open to Industry Person, Faculty,
Research Scholar, UG & PG students from
Electrical & Electronics Engineering & Computer
Engineering.
For any further information regarding programs at
SPSU, please contact:
Registrar
Sir Padampat Singhania University
Bhatewar, Udaipur 313 601, Rajasthan
Telephone: +91 2957-226095 (6 Lines)
Telefax: +91 2957-226094
Email: info@spsu.ac.in
Completed registration forms should be sent to
the coordinator at the following address or via
email or fax.
Dr. Shilpi Birla
Electronics and Communication Engineering
Sir Padampat Singhania University
Bhatewar Udaipur,
Rajasthan 313 601.
Phone: +91 2957-226095 (Ext 350)
Fax: +91 2957-226094
e-mail: shilpi.birla@spsu.ac.in
RESOURCE PERSONS
Dr. Manisha Pattanaik (IITM, Gwalior)
Mr. Sujith MB (Eigen Technologies, New Delhi)
Dr. Shilpi Birla (SPSU, Udaipur)
Dr. Jitendra K. Srivastava (SPSU, Udaipur)
IMPORTANT DATES
Last date of registration: February 15, 2015
Notification of acceptance: February 17, 2015
Workshop dates: February 19-20, 2015
For additional copies of the registration form,
please use a photocopy or type in the format given.
Incomplete forms will not be entertained.
INTRODUCTION
The goal of this workshop is to enhance the
knowledge of faculty, students and industry
professionals in Device Modeling & Simulation
using TCAD and HSPICE which are modeling and
device simulations and spice simulators tools
respectively.
Module for TCAD Workshop:
 Introduction to TCAD.
 MOS Device structure using Sentaurus Structure
Editor.
 Sentaurus Device.
 Inspect & Sentaurus for analyzing the results.
 Sentaurus Workbench for process simulation.
 Introduction to Sentaurus workbench.
 Brief Idea foe modeling other devices.
HSPICE is a spice simulator tool. As IC geometries
continue to shrink, the need for an accurate circuit
simulator is critical. Designers require a highly
accurate circuit simulator to precisely predict the
timing, power consumption, functionality, and yield
of their designs.
Module for HSPICE Workshop:
 Introduction to SPICE. Netlist Overview.
 Simulation Inputs, parameters & functions
 Sources and Stimuli. Different SPICE Analyses.
 HSPICE software simulation and analyzing
outputs with examples.
ABOUT THE UNIVERSITY
Sir Padampat Singhania University has been
established by an Act of the State Government of
Rajasthan in 2007, under the aegis of the JK Cement
Group of companies just outside of Udaipur,
Rajasthan and approved by UGC. SPSU is a private
residential University dedicated to provide a unique
environment & opportunity for its students and
scholars to whet their personalities in a robust
academic system and to enjoy a first class experience
of campus life.
The University offers programs leading to
undergraduate, post-graduate and doctoral degrees in
the areas of engineering and management.
We believe that education should be both broad and
useful, enabling students to participate in “the
humane culture of the community” and to discover
and apply knowledge for the benefit of society.
The University has comprehensive academic
collaborations, which includes student and faculty
exchange, with the universities worldwide.
BOARDING & LODGING:
Boarding and lodging will be provided in the Student
Hostels on chargeable basis.
A request is to be made in this regard at the time of
registration.
Workshop
On
“Technology CAD & HSPICE”
(Modeling, Device Design & Simulation)
February 19 - 20, 2015
Registration Form
Name (in block letters): (Mr./Mrs./Ms.)
__________________________________________
Designation:_______________________________
Organization:_______________________________
Mailing Address:____________________________
Telephone:_________________________________
Fax:______________________________________
Email:____________________________________
Educational Qualification:____________________
Experience:________________________________
Accommodation in Campus*: YES / NO
Signature of Applicant:________________________
Sponsorship and signature of Principal of the College
/Institute (with date & seal)