A GENERIC OFFICE
WITHOUT
THE WISENET SYSTEM
A GENERIC OFFICE
WITH
THE WISENET SYSTEM
WHAT THE WISENET SYSTEM CONSISTS OF
Gateway / Server / Wireless Network Manager
Router Repeater / Mesh Node
Sensor / Activity Counter / Star Node
The Gateway or PAN Coordinator automatically discovers and
manages the Router Repeaters and Sensors that are designated to be
part of the Network. The Gateway only communicates directly with
the Router Repeaters.
The Router Repeaters communicate with the Sensors and receive the
actual counts of activity at each individual Workstation or Position.
They in turn forward that data to the Gateway. Each Router Repeater
can support a maximum of 32 Sensors, 20 is optimal.
The Sensors are installed at each work position to be measured and
forward their activity counts to the Router Repeaters which in turn
forward that data to the Gateway where it is stored for daily
transmission over the Internet to the Abintra Wisenet client
application. The data can be shared with other applications using the
site IT Infrastructure.
WISENET IS A FULLY AUTONOMOUS, SELF HEALING DISCREET WIRELESS MESH NETWORK
•
Installation takes place during unoccupied periods
•
Sensors are mounted under work surfaces
•
Router Repeater Mesh Nodes connect to power outlets
•
Gateways connect to Customer IT Network
REPORTS VIA WEB PORTAL
•
Data from Sensors is pushed to Router Repeaters
•
Data from Router Repeaters is pushed to Gateway
•
Data from Gateway is pushed to Abintra Client Application
Site Firewall
Abintra Client App
TECHNICAL POINTS
Q
Can the Abintra Wisenet Wireless Network interfere with other wireless
infrastructure in our facility ?
A
No, the transceiver power levels are too low to affect 2.4 GHz Wi
-
Fi Traffic and we use
continuous dynamic Frequency Hopping techniques to avoid transmitting on saturated
channels.
Q
Are there any health risks associated with the wireless network devices?
A
No, again the power levels are significantly less than those associated with Wi
-
Fi or
even individual cell phones.
Q
What are the sensors active elements?
A
The active element in the sensor is a
Passive Infrared
Motion Sensor that senses the
human body heat wave form signature, no cameras, no microphones, and no RFID tags.
Q
What type of Wireless Network is Wisenet?
A
It is 802.15.4, similar to 802.11 it operates in the same 2.4 GHz RF spectrum but at
highly restricted transmission intervals and power levels.
Q
How is the Network secured?
A
All Mesh communication traffic is in compliance with the NIST AES
-
197 encryption
standards.
WHAT WISENET SEES
TIME: 09:50
Workstations
Conference Room
Touchdown
Count
24
12
12
Occupied
18
12
0
Utilization
75.0%
100.0%
0.0%
Occupied
Unoccupied
66.6%
16.6%
25.0%
HOW DATA CAN BE USED TO EVALUATE OR AUGMENT OTHER FACILITY FUNCTIONS
TIME: 10:00
Workstations
Conference Room
Touchdown
Count
24
12
12
Occupied
16
2
3
Utilization
•
The Meeting Room with 12 Seats was booked through the In House
Event Management System for a party of 9, yet only 2 people actually
used the room for most of the booked time.
FOLLOWING THE SURVEY CHANGES TO THE SPACE CAN BE MADE WITH PRECISION
58.3%
0.0%
0.0%
TIME: 10:10
Workstations
Conference Room
Touchdown
Count
24
12
12
Occupied
14
0
0
Utilization
10 MINUTE RESOLUTION PROVIDES HIGHLY ACCURATE USE RATE
79.2%
0.0%
8.3%
TIME: 10:20
Workstations
Conference Room
Touchdown
Count
24
12
12
Occupied
19
0
1
Utilization
OTHER FACTORS SUCH AS VACATION AND FIELD DUTIES CAN BE FACTORED
79.2%
8.3%
8.3%
TIME: 10:30
Workstations
Conference Room
Touchdown
Count
24
12
12
Occupied
19
1
1
Utilization
STATISTICALLY THIS CONFERENCE ROOM CAN BE CONVERTED FOR OTHER USE
83.3%
8.3%
8.3%
TIME: 10:40
Workstations
Conference Room
Touchdown
Count
24
12
12
Occupied
20
1
1
Utilization
Now that you have Utilization / Occupancy Data
what else can be done with it?
•
Dynamic feed forward information to Lighting Control Systems
•
Dynamic feed forward information to Building Automation Systems
•
Dynamic feed forward information to Security Administration
•
Daily Reports to Facility Services
THESE NEXT SLIDES DEPICT HOW A DYNAMIC MEASUREMENT OF OCCUPANCY CAN BE
APPLIED TO THE CONTROL OF NEXT GENERATION LIGHTING PRODUCTS THAT ARE
AVAILABLE TODAY. CONTROL ENGINE BY REDWOOD SYSTEMS , LED LUMINAIRES BY
TELAMON ENERGY SOLUTIONS, DYNAMIC OCCUPANCY MEASUREMENT BY WISENET.
WITH THE REDWOOD LOW VOLTAGE CONTROL ENGINE EACH FIXTURE HAS ITS OWN CIRCUIT
IN THIS SCENARIO ONLY 29% OF THE AREA LIGHTING NEED BE AT 100%
71% OF THE LIGHTING NEED ONLY OUTPUT AT 20%
LIGHTING ENERGY SAVINGS OF 50% DYNAMICALLY CONTROLLED
•
Savings from LED vs. T8 Fluorescent 42%
•
Savings of 50% on LED Luminaires via Occupancy Control
•
Savings 8% on avoided HVAC Lighting Load Cooling
THESE NEXT SLIDES DEPICT HOW DYNAMIC MEASUREMENT OF OCCUPANCY CAN BE
APPLIED TO AUGMENT YOUR EXISTING BUILDING AUTOMATION SYSTEM PROCESSES,
NOT BY DIRECTLY CONTROLLING RELATED HVAC SYSTEMS BUT BY PROVIDING HIGHER
RESOLUTION OCCUPANCY DATA TO THOSE SYSTEMS THAT SERVE THE OCCUPIED AREAS.
WHAT THE BUILDING AUTOMATION SYSTEM SEES
Typical Area Covered by a BAS
Sensor Controlling a VAV Box
serving 4,000 Square Feet
Single Point of Measurement
4 Deg F Above Set Point
2 Deg F Above Set Point
At Set Point
2 Deg F Below Set Point
4 Deg F Below Set Point
4 Deg F Above Set Point
2 Deg F Above Set Point
At Set Point
2 Deg F Below Set Point
4 Deg F Below Set Point
WHAT WISENET SEES
Typical Area Covered by a BAS
Sensor Controlling a VAV Box
serving 4,000 Square Feet
Single Point of Measurement
Because each Wisenet Sensor can be populated with
a Temperature Sensor a detailed heat map of each
area down to position level can be dynamically
acquired.
WHAT THE FACILITY MAINTENANCE DEPARTMENT CAN NOW SEE
Typical Area Covered by a BAS
Sensor Controlling a VAV Box
serving 4,000 Square Feet
Single Point of Measurement
The air distribution ductwork downstream from the VAV
Box typically has manual balancing dampers which are
initially set by the contractor of record.
Over the course of time with internal equipment changes
and floor layout alterations the air balance may not be
adequate for the space.
Wisenet can prove to be a valuable tool to
assist the Facility Maintenance personnel
in solving these comfort, and ultimately
productivity issues.
WHAT THE ACCOUNTING DEPARTMENT CAN NOW SEE
Section 9. from Use Case Example of 65,000 Square Foot building.
Questions
Enter the password to open this PDF file:
File name:
-
File size:
-
Title:
-
Author:
-
Subject:
-
Keywords:
-
Creation Date:
-
Modification Date:
-
Creator:
-
PDF Producer:
-
PDF Version:
-
Page Count:
-
Preparing document for printing…
0%
Comments 0
Log in to post a comment