TRAPEZ FLEx: FLExIbLE INSTALLATION DUE TO TRAPEZOIDAL SHOE.

viraginityfumblingSoftware and s/w Development

Nov 2, 2013 (3 years and 9 months ago)

89 views

TRAPEZ FLEx: FLExIbLE INSTALLATION
DUE TO TRAPEZOIDAL SHOE.
Donauer Solartechnik provides three different
supporting systems for installations on trapezoidal
roofs: Trapez Flex, Trapez Light and Trapez Combi.
The star, owing to its ease of use, is the Trapez
Flex system.
ROOF FASTENING
The Trapez Flex substructure allows solar modules
to be mounted crosswise, diagonally or vertically,
as well as in an elevated position. It is based on an
individually adjustable trapezoidal sheet holder that
is screwed onto the raised beading. This ‘trap-
ezoidal shoe’ features a flexible sidepiece, which
allows it to be pre-set to the width of the raised
beading while still on the ground. Once on the roof,
self-tapping screws are then used to attach the
pre-adjusted shoe with its ready-drilled holes in just
seconds. The screw holes are sealed with the aid of
an EPDM gasket.
TRANSVERSE RAILS
A profile can be mounted on the Trapez Flex in
next to no time. Irrespective of roof alignment,
transverse rails such as the Siplex Profile are
simply screwed onto the trapezoidal shoe. By fixing
separate trapezoidal shoes to the entire roof, solar
modules can be mounted crosswise, diagonally or
vertically or in an elevated position. The Siplex
profile, with pre-assembled module attachment
sets, and the Standard Type 2 transverse rail are
suitable for all common fields of application. If the
loads and distances between the fastening points
are smaller, the Light Type 2 transverse rail is the
perfect solution – its reduced height and lack of a
cable channel makes the profile incredibly light.
Exactly right for use on trapezoidal roofs.
MODULE FASTENING
The individual modules are joined using middle
clamps; the respective ends are attached to the
profile with end clamps. An M8 anti-theft device
that prevents the insertion of an Allen key can
be installed as an optional extra.
Trapez Flex can be screwed onto the raised beading
of the trapezoidal roof in a matter of seconds.
PITCHED ROOF
The trapezoidal sheet holder can be
individually adjusted to the width of the
raised beading.
Manufacturing and distribution: Donauer Solartechnik Vertriebs GmbH. Subject to errors and technical modifications.
Last amended: 06/2012; Contact: info@donauer.eu // www.donauer.eu
8
» Trapez Flex is individually adjustable
» It can be pre-set to the right width at ground level
» It allows the solar modules to be aligned to any direction
» Quick installation on the roof
INTERSOL Mounting Systems Product Catalogue 2012
9