Download product overview of Process Automation (3,8Mb) - Festo

subduedlockMechanics

Nov 5, 2013 (3 years and 5 months ago)

113 views

Process automation
Product overview
Total Field Pneumatic
Control Solution
www.festo.com
11/1/2012 2:28:38 PM
11/1/2012 2:28:38 PM
11/1/2012 2:28:38 PM
11/1/2012 2:28:38 PM
11/1/2012 2:28:38 PM
11/1/2012 2:28:38 PM
11/1/2012 2:28:38 PM
11/1/2012 2:28:38 PM
11/1/2012 2:28:38 PM
11/1/2012 2:28:38 PM
Festo -
The automation
company
Festo is a leading industrial
automation supplier with main
emphasis on pneumatic and
electromechanical systems.
Festo serves 300,000 customers
worldwide and invests 8.5%
of its turnover in Research &
Development.
With 59 independent national
companies, more than 250
subsidiaries and a close knit
service network in 176 countries
worldwide, Festo strives to
ensure that customers can
obtain components, subsystems
and systems for automation in
next to no time.
Product range for process
technology and process
engineering
Festo is keeping abreast with
the fast pace of technological
progress by continually
expanding the range of products
for this industry segment.
In addition, the functionality
of products has been adapted
to particular functions of the
process technology and process
engineering such as explosion
protection, corrosion resistant,
etc.
Connection to third party
products
With regards to integrating Festo
products to third party products,
flexible components of Festo
facilitates the connection to
most of the industrial standard.
The crucial factor is the system
concept which integrates,
complements and/or improves
the existing functionality of a
system with new component.
Quality assurance
As an automation specialist in
production industry, Festo has
an enormous potential of know-
how experience. Furthermore,
all products – components,
subsystems, etc; are tested
under the most extreme
conditions and technically
optimized.
Worldwide industry segment
advice
Festo technical consultants,
engineers and experts ensure
that high quality yardstick
synonymous with Festo is
implemented to optimum effect
worldwide. Our international
presence ensures maximum
availability of products and our
proverbial quality of services.
Festo – the industry segment partner
Pa.Prod.Overview.indd 2
11/1/2012 2:28:42 PM
For more than 8 decades, Festo
develops products catering for
digital and analogue automation
in the field of pneumatic
automation.
Initiated as a supplier for
automated components –
actuated valves, tubings, air
preparation units, various
pneumatic connections
to solenoid valves; Festo
successfully integrated solenoid
valves with electrical input/
output modules and employs
latest fieldbus technology for
communication. User thereby
gets the benefit of optimized
investment – reduced cable to
the field, associate installation/
infrastructure cost, etc.
Furthermore, the ability to
incorporate standard diagnostic
features of solenoid valves
will assist in the accurate
identification of problem,
leading to more effective
maintenance activities.
With such comprehensive
range of products, engineering
competencies and strong
experiences in pneumatic
design; Festo is in a unique
position to be your fieldbus
automation partners.
Automation solution in process industry
“Total Field Pneumatic Control Solution Supplier”
Control Cabinet (Normal/SS)
Air preparation unit
Automated
on/off valve
Digital Output
Digital Input
Remote I/O with valve terminals
Analogue Input
Pa.Prod.Overview.indd 3
11/1/2012 2:28:43 PM
Comparison of
pneumatics, electric and
hydraulics
Pneumatics Electric Hydraulic
Energy storage
by mean of air tanks and
compressed air bottles
with batteries, although
only in small quantities
with the helps of gases
Energy
transmission
easily up to 1,000m
(pressure drop is possible)
unlimited, but voltage drop up to 100m
(pressure drop)
Leakage
no disadvantages
(minimal energy loss)
danger of exposed cables contamination
Environmental
conditions
explosion-proof,
temperature insensitive,
ice hazard with non dried
compressed air in winter
explosion hazard in certain
areas, temperature insen-
sitive, heating required for
outdoor use
sensitive to temperature
fluctuations, fire risk in the
event of leakage
Handling
simple only with specialised
technical knowledge
more difficult than with
pneumatics, return piping
is necessary
Generation of
linear movements
simple with excellent
adjustable speed
associated with major
expenditure, gear units
simple with cylinder, good
adjustable
Forces overload-proof, no energy
consumption for retention
forces
not overload-proof,
impaired efficiency as
a result of downstream
mechanical elements
overload-proof, permanent
energy consumption for
retention forces
Pa.Prod.Overview.indd 4
11/1/2012 2:28:46 PM
Standard in practice
In ensuring the interchangeable
of tremendous numbers
of process automation
products, which vary greatly
in construction, material,
size, service life, quality and
price; the standards and
guidelines has been drawn up
over a period of time. These
standards or guidelines refer to
the mechanical interfaces and
are intended to facilitate the
assembly of a complete control
unit (process valve/ actuator/
end position sensing device).
Service reliability
Worldwide support
By locating the engineering
centre in each region, Festo
brings engineering know-
how and experts closer to the
customers. In addition, this also
allows each engineering centre
to tap on each other experience
in bringing customers more
advance solutions
Global collaboration
In this globalization world,
seeing the world as one
customer and working on
international level has become
inevitable. With its global
existence, Festo is able to
provide a competitive advantage
support worldwide.

These interfaces are:
ISO 5211/5210 – process •
valve and process actuator
DIN 3337 – process valve and •
process actuator
VDI/VDE 3845, NAMUR – •
actuator, end position sensing
device
VDI/VDE 3845, NAMUR – •
actuator, solenoid valve
ATEX explosion protection•

Engineering tools
“Delivering value” to Festo
means more than just being a
partner, but to offer competitive
advantage support. The
engineering tools created are
used in assisting the engineers
in dimensioning and simulating.
This is to ensure the reliability
from the start.
Commissioning
Ready, tested control systems
are installed by service
personnel directly, where Festo
will be on site to ensure the
system is up and run.
In addition, Festo also offers
a range of automation related
training courses.
Pa.Prod.Overview.indd 5
11/1/2012 2:28:47 PM
Actuator
Semi-rotary actuator – DFPB
Flange hole patterns to ISO 5211

Clockwise / counter-clockwise rotation is possible (valve interface on both sides)

Assembly interface to VDI/VDE 3845

Rack and pinion mechanism

Function
Ambient temperature
[°C]
Size
Torque at 6 bar
[Nm]
Swivel angle
[°]
Double-acting -20...80
Double-acting -20...80
10...1,050
7...945
0...90
Single-acting -20...80
Single-acting -20...80
105...5,205
1...882
0...90
Semi-rotary actuator – DAPS
Flange hole patterns to ISO 5211

Assembly interface to VDI/VDE 3845

Namur port pattern for solenoid valves to VDI/VDE 3845

Scotch-yoke mechanism, twin piston balanced pinion force

Available variant: Epoxy coating, PTFE coating and low temperature (-50°C)

Function
Ambient temperature
[°C]
Size
Torque at 5-6 bar
[Nm]
Swivel angle
[°]
Double-acting -20...80
Double-acting -20...80
8...8,000
8...8,000
0...90
Single-acting -20...80
Single-acting -20...80
15...4,000
15...4,000
0...90
Manual semi-rotary actuator – DAPS-MW
Flange hole patterns to ISO 5211

Namur port pattern for solenoid valves to VDI/VDE 3845

Scotch-yoke mechanism

Direct hand wheel actuating on piston without need of gearbox

Function
Ambient temperature
[°C]
Size
Torque at 6 bar
[Nm]
Swivel angle
[°]
Double-acting -20...80
Double-acting -20...80
15...1,920
15...1,920
0...90
Single-acting -20...80
Single-acting -20...80
15...960
15...960
0...90
Semi-rotary actuator – DRD/DRE
Flange hole patterns to ISO 5211

Assembly interface to VDI/VDE 3845

Namur port pattern for solenoid valve to VDI/VDE 3845

Available variant: Spring force (closing/opening), adjustable end-position limitation and corrosion resistant version,

swivel angle up to 180°
Function
Ambient temperature
[°C]
Size
Torque
[Nm]
Swivel angle
[°]
Double-acting -20...80
Double-acting -20...80
1...880
7.44...8,814
0...90
Single-acting -20...80
Single-acting -20...80
2...880
2...880
0...90
Linear actuator – DLP
Positioning sensing

Integrated Namur working ports

Piston rod with male thread

Namur port pattern for solenoid valves to VDI/VDE 3845

Mounting hole pattern to ISO 5211

Function
Operating pressure
[bar]
Piston Ø
[mm]
Stroke length
[mm]
Force
[N]
Double-acting 6
Double-acting 6
80...320
40...2,000
2,800...48,255
Controlled linear actuator – DFPI
Integrated displacement encoder, valve manifold and positioner

Robust design for harsh environment

Fast commissioning

Use to control gate valves and plug valves in outdoor

Special strokes on request

Function
Operating pressure
[bar]
Piston Ø
[mm]
Stroke length
[mm]
Force
[N]
Double-acting 3...8
Double-acting 3...8
100...320
40...990
4,417...48,255
SS Cylinder – DAIG
Compact stainless steel cylinder

Corrosion resistance to harsh environment

Use in mining industry

Accessories: bellow (to protect piston rod seal)

Function
Operating pressure
[bar]
Piston Ø
[mm]
Stroke length
[mm]
Force
[N]
Double-acting 3...8
Double-acting 3...8
320
40...990
46,380...48,250
Safety shutter AEVU-SA
Safety shutter actuator with integrated inert gas pipe clamping

Prevent human interference in safety critical environment

Mechanical spring to extend

Use in inert gas application

Function
Operating pressure
[bar]
Piston Ø
[mm]
Stroke length
[mm]
Piston cover
Safety shutter 6
Safety shutter 6
63...70
20...25
Normally extended
Knocker – KNO
Pneumatic knocker

High impact force

Maintenance free

Easy mounting

Use for silos, hoppers and bulk goods movement

Operating pressure: 2...8 bar

Piston Ø: 40...80mm

3 position actuator
Use in filling and dozing application

For rough and fine dozing without the use of complex equipment

Digital control, no analogue required

Valves / Process valves
Butterfly valve
Centric design

Standard double / single acting actuator

Face-to-face dimension in accordance with EN 558-1

Seal principle
Direction of flow
Ambient temperature
[°C]
Temperature of
medium [°C]
Nominal pressure
Soft
Reversible
-20...80
-23...82 (NBR)
-40...135 (FDM)
PN10
Ball valve
Full port ball valve

Combination of a pneumatic quarter turn actuator and a ball valve

Combination comes in fail close or fail last ball valve

Operating medium: compressed air, water neutral gases, neutral fluids, vacuum

Valve seal
Connection size Temperature range
Connection size Temperature range
[°C]
Torque
[Nm]
Operating pressure
[bar]
Soft PTFE
¼...4
-20...150
4...107.8
25...40
Angle seat valve VZXF – 2/2-way valve
Pneumatic controlled 2/2-way valve

Do not require different pressure between inlet and outlet

Suitable for steam, high viscosity up to 600mm

2
/s, dirty media
Max viscosity
[mm
2
/s]
Connection size (G
or NPT)
Material
Flow rate
[Kv]
Operating pressure
[bar]
600
½...2
- Brass
- Stainless steel 304
2.8...47.5
4...10
Diaphragm valve – VZWP
Simple sturdy design

High working pressure using small solenoid coils

Normally close (N.C.) guarantees valve closed on voltage failure

Can be operated with air, neutral gas and neutral liquid

Design
Connection size (G) Variant seal
Connection size (G) Variant seal
Flow rate
[Kv]
Operating pressure
[bar]
Piloted piston poppet ¼...1
Piloted piston poppet ¼...1
NBR (Standard)
FPM
1.5...11.5
0.5...40
0.5...40
Diaphragm valve – VZWM
Solenoid activated diaphragm control valve

Various voltage 24 V DC, 110/230 V AC

Nominal diameter
[DN]
Connection size (G) Material
Connection size (G) Material
Flow rate
[l/min]
Operating pressure
[bar]
8...50
¼...G2
- Brass
- Stainless steel
1,400...31,000 10
1,400...31,000 10
Operated 2/2-way valve VZWD
High pressure rating

Direct solenoid activation

Use for small flow rates and/or high pressure application

Max. viscosity
[mm
2
/s]
Connection size Material
Connection size Material
Flow rate
[Kv]
Operating pressure
[bar]
22
¹/
8
...¼
- Brass
- Stainless steel
0.06...0.4
0...90
Forced pilot operated valve – VZWF
Forced lifted of the valve diaphragm

Different pressure is not required

2/2-way normally closed

Suitable for cooling, filling, vacuum, liquid gas, bottling systems

Variant seal
Connection size (G) Material
Connection size (G) Material
Flow rate
[Kv]
Operating pressure
[bar]
NBR (standard),
EPDM, FPM
¼...2
- Brass
- Stainless steel
1.8...28
0...10
Pulse valve – VZWE
High flow rate

Fast switching cycle

Suitable for clean bag house filters and anti pollutant equipment

Pressure
[bar]
Connection size (G) Material
Connection size (G) Material
Nominal size
[mm]
Operating voltage
[V]
0.35...8
³/
4
...3
Cast aluminium 20...76
Cast aluminium 20...76
24 DC
110, 220 AC
Manual ball valve – CRQH
Pipe thread in accordance to ANSI B2.1

Blow out proof stem / full port

Stainless steel ASIS 316 (DIN 14408)

Function
Connection (NPT) Material
Connection (NPT) Material
Flow rate
[Gv]
Nominal pressure
[bar]
2pc design
¼...4
S/S316 body
PTFE seal
6.6...780
up to 40
3pc design
Solenoid valves
Pilot valve – VOFD (Namur)
Sturdy design and high resistance to corrosion make these valves suitable for outdoor use

Port pattern to Namur for direct mounting of a drive as well as G and NPT threaded connections

Suitable for use in safety related systems up to and including SIL 4 to IEC 61508; and protection class IP65

Duty cycle: 100%

Constructional design Flow rate
Constructional design Flow rate
[l/min]
Ambient temperature
[°C]
Pneumatic connection
(G, NPT, Namur)
Operating pressure
[bar]
Poppet
450
10...60
¼
2...8
Pilot valve – VOFC (Namur)
Use within chemical and petrochemical systems – frequently used as pilot valves for flaps and drives

The surface of the valve housing is treated with hard Ematal

Port pattern to Namur for direct mounting of a drive as well as G and NPT threaded connection

Suitable for use in safety related systems up to and including SIL 4 to IEC 61508; and protection class IP65

Duty cycle: 100%

Constructional design Flow rate
Constructional design Flow rate
[l/min]
Ambient temperature
[°C]
Pneumatic connection
(G, NPT, Namur)
Operating pressure
[bar]
Poppet / Spool 600...3,000
Poppet / Spool 600...3,000
-25...60
¼,½
2...8
Solenoid valve – VSNB (Namur)
3/2-way or 5/2-way mono or bistable

CNOMO interface for simple connection to the pilot control

Port pattern to Namur – VDI/VDE 3845

Constructional design Flow rate
Constructional design Flow rate
[l/min]
Ambient temperature
[°C]
Operating voltage
[V]
Operating pressure
[bar]
Piston spool
950
-10...60
24 DC
110, 230 AC
2.5...8
Solenoid valve NVF3 (Namur)
3/2-way or 5/2-way mono or bistable

Port pattern to Namur – compliance to VDI/VDE 3845

ATEX symbol: II 2 G c T6, II 2 D c 40°C, II 2 G EEx ia IIc T6, II 2 D Ex iaD IP65 T80°C

Valve function Flow rate
Valve function Flow rate
[l/min]
Ambient temperature
[°C]
Operating voltage
[V]
Operating pressure
[bar]
3/2-way or 5/2-way,
single solenoid
900
-5...40
12, 24, 42, 48 DC
24, 42, 48, 110, 230,
240 AC
2...10
Valve terminals
Valve terminal – CPV
Ready to install and tested unit

Ideal for decentralised system structures

Optimized assembly for control cabinets

Pneumatic multiple connector plate – fast assembly without the need to replace connected tubing

Up to sixteen 2/2-way or 3/2-way valve per valve terminal – thanks to two-valve function in each valve slide

Type
Valve width
[mm]
Flow rate
[l/min]
Operating pressure
[bar]
Ambient temperature
[°C]
CPV10
10
400
-0.9...10
-5...50
CPV14
14
800
CPV18
18
1,600
Valve terminal – MPA/MPA-F/MPA-L
Slim high performance valve in sturdy metal housing

With multi-pin plug, AS-interface, CPI, fieldbus connection and control block

Expandable to up to 128 solenoid coils

The LEDs on the valves and diagnostics via fieldbus allows fast troubleshooting

Up to sixteen 2/2-way or 3/2-way valve per valve terminal – thanks to two-valve function in each valve slide

Vertical shut-off module – individual valve could be replaced without shutting down the whole manifold

Ambient temperature
[°C]
Flow rate
[l/min]
Valve width
[mm]
Operating voltage
[V]
Operating pressure
[bar]
-5...50
up to 700
10...21
24 DC
-0.9...10
Valve terminal – VTSA/VTSA-F
High performance valves in sturdy metal housing

Standardised from multi-pin plug to the fieldbus connection and control block

Expandable to up to 32 solenoid coils

Fast troubleshooting: LEDs on the valves and diagnostics via fieldbus

Vertical shut-off module – individual valve could be replaced without shutting down the whole manifold

Up to sixteen 2/2-way or 3/2-way valve per valve terminal – thanks to two-valve function in each valve slide

Available in NPT thread

Duty cycle
[%]
Flow rate
[l/min]
Valve width
[mm]
Operating voltage
[V]
Operating pressure
[bar]
100
400...2,900
18...52
24 DC
110 AC
-0.9...10
Valve terminal CDVI
Valve technology with a high resistant polymer materials

Development with practical consideration in mind – hygienic, corrosion resistant and easy to clean

Expandable to up to 24 solenoid coils

Duty cycle
[%]
Flow rate
[l/min]
Valve width
[mm]
Valve position Operating pressure
Valve position Operating pressure
[bar]
100
300...650
24
4...16
-0.9...10
Valve terminal CPV Ex-i for explosion areas
Up to sixteen 2/2-way or 3/2-way valves per valve terminal – thanks to two-valve function in each slide

Intrinsically safe valve terminal design to ATEX Category 2 (Zone1)

Extremely robust thanks to the metal valve design

Pneumatic multiple connector plate – fast replacement of the valve block without the need to replace the existing tub-

ing connection
Valve assembly optimized for control cabinets

Available in NPT thread

Duty cycle
[%]
Flow rate
[l/min]
Valve width
[mm]
Operating voltage
[V]
Ambient temperature
[°C]
100
400
10
24 DC
-5...50
Valve terminal – VTUB
Universal from the individual valve up to the multi-pin plug

Selectable valve functions: 3/2-way and 4/2-way

Expandible to up to 16 valve positions on one valve terminal, max. 24 solenoid coil

Sturdy polymer housing and metal manifold rail

Valve width
[mm]
Flow rate
[l/min]
Ambient temperature
[°C]
Operating voltage
[V]
Operating pressure
[bar]
20
up to 1,000
-5...50
12, 24 DC
24, 110, 230 AC
-0.9...8
Modular electrical terminal – CPX
Electrical input/output modules, bus nodes and pneumatic interface/electronic module for valves

Extensive range of functions as connection options for the electrical modules

Open to all fieldbus protocols and ethernet

The extensive selection of LEDs on the bus node and on all I/O modules allow fast troubleshooting

I/O modules
CP interface
Multi axis interface
Max. inputs capacity
[byte]
Max. outputs capacity
[byte]
Operating voltage
[V]
Protection class
Up to 9
64
64
24 DC
IP65/IP67/IP20
Handheld – CPX-MMI
Fast access to the diagnostic history and the modules with diagnostic messaging

Small, convenient commissioning and service device for the CPX terminal

Display and modified the current status of the inputs and outputs of a module

Advance commissioning through the monitoring/forcing of inputs and outputs without fieldbus master/PLC

Data interface Protection class ATEX category Operating voltage
Data interface Protection class ATEX category Operating voltage
Data interface Protection class ATEX category Operating voltage
Data interface Protection class ATEX category Operating voltage
[V]
Time stamp
RS 232 interface, 57.6
kBaud, M12 socket,
4 pins
IP65
II 3 G, II 3 D
18...30 DC
Display last 40 error
occurrences
Installation system – CPI
Complete concept for decentralised system structure

Four CP strings up to 10m in length (radius) facilitate optimum decentralization

Max. 32 inputs and 32 outputs valves per string

Display of the input status of each input signal via an assigned LED

No. of output Protection class Power supply
No. of output Protection class Power supply
No. of output Protection class Power supply
[24 V DC]
Operating voltage
[mA]
Operating voltage for
sensors
16...32
IP65
CP connection typically 75
CP connection typically 75
24
Sensors
Sensor box DAPZ
Drive interface to VDI/VDE 3845 (Namur)

Simple and quick assembly and connection

Integration solenoid valve actuation

AS-interface is available

Operating voltage
[V]
Max. current output
[mA]
Sensing type Ambient temperature
Sensing type Ambient temperature
[°C]
Mechanical
0...250 DC/AC up to 16,000 - Basic version
0...250 DC/AC up to 16,000 - Basic version
0...250 DC/AC up to 16,000 - Basic version
- Explosion proof
-20...85
Contactless
10...30

- Basic version
Sensor box SRBF
Limit switch attachment with two mechanical switches in painted aluminium housing

With 8-pin terminal block and yellow/red visual indicator

Mounting standard: ISO 5211, DIN EN 60947-5-1

Operating voltage
[V]
Max. switching
capacity
Measuring principle Ambient temperature
Measuring principle Ambient temperature
[°C]
Direct voltage DC 0...24
Direct voltage DC 0...24
36 W
For mechanical,
electrical proximity
sensors
-25...80
Alternating voltage AC 0...250
Alternating voltage AC 0...250
1,700VA
Analogue/binary sensor box – SRAP/SRBP
The analogue version:

Reports the open/closed position of the semi-rotary actuator, detects the entire swivel range and reports this back

to the controller via the analogue signal
The integrated sensors are based on proven 2D Hall Technology

The binary version:

Position sensor for semi-rotary actuator and it reports the open and closed position of the actuator

Sensors are based on reed technology

Drive interface to VDI/VDE 3845 (Namur)

Output
[mA]
Operating voltage
[V]
Adjust angle
[°]
Ambient temperature
[°C]
Analogue
4...20
15...30
0...270
-20...80
Binary
up to 28.8 DC/AC up to 28.8 DC/AC
up to 28.8 DC/AC up to 28.8 DC/AC
Sensor box – QH-DR-E
Operating medium: filtered compressed air, lubricated or non-lubricated (for pneumatic sensing)

Quick and easy assembly

Drive interface to VDI/VDE 3845 (Namur)

Sensing method Operating pressure
Sensing method Operating pressure
[bar]
Operating voltage
[V]
Max. current output
[mA]
Ambient temperature
[°C]
Pneumatic sensing -0.95...8
Pneumatic sensing -0.95...8


-10...60
Electrical sensing –
Electrical sensing –
0...250 DC/AC 16,000
0...250 DC/AC 16,000
-20...85
Inductive sensing –
Inductive sensing –
10...30 DC
200
-20...70
Proximity sensor – SME/SMT
Insertable in slot from above, does not protrude over the cylinder profile

Cable clip and inscription labels included in the scope of delivery

Design for T-slot suitable for DLP, DFPI and DNG

CE marking to EU directive for EMC and to EU directive explosion protection (ATEX)

Explosion protection: up to Zone 0, 1, 2, 20, 21, 22 (ATEX)

ATEX category gas/
dust
Explosion ignition
[°C]
Ambient temperature
[°C]
Switch output Protection class
Switch output Protection class
II 1 G/ II 1 D
T 115
-10...70
Namur
IP65/IP67
Displacement encoder – MLO-POT-...-LWG
Connecting rod potentiometer

Absolute measurement with high resolution

Long service life

High degree of protection

Plug-in connection

Resolution
[mm]
Stroke length
[mm]
Power supply
[V DC]
Wiper current
maximum [mA]
Ambient temperature
[°C]
0.01
100...750
10
10
1)
-30...100
1)
Only permissible in the short-term in the event of a fault
Accessories
Service unit – MS-Series
Sturdy housing

Modular system

Complete product range

High flow rates

Connections
Grade of filtration
[µm]
Flow rate
[l/min]
Input pressure
[bar]
Temperature range
[°C]
G¹/
8
...G2
5 or 40
850...17,000 0.8...20
850...17,000 0.8...20
-10...60
Range of tubing
Economical

Hydrolysis resistant

Pressure resistant

Heat resistant

Antistatic

Resistant to cleaning agent

Media resistant

Flame retardant

Resistant to welding spatter

Food industry approved

Range of fitting
More than 300 connectors

Mini and standard series

Versatile thread/tubing diameter combinations

Flexible assembly, can be repositioned by 360° and combinable

Leakage-free

Flow control, non-return, shut-off and pressure regulating valves available with QS connection

Corrosion and acid resistant design

Pipping system – QC
Simple, fast installation: cut the length, insert and you’re done!

Can be re-used a number of times

Plug connector material is approved for use by the FDA (Food and Drug Administration)

Leakage-free, corrosion-free

Outer diameter Ø
[mm]
Operating pressure
[bar]
Room temperature
[°C]
Temperature for water
separator [°C]
Pipe material
12...28
-0.95...15
-25...75
-25...75
Polyamide, aluminium
Adsorption dryer – LDM1
Optimum final dryer with excellent operational reliability•
Suitable for use as an individual device or for integration in existing service unit combinations•
Flow rate dependent dew point reduction•
Wear-free function requiring no external energy•
Can be mounted near to point of use•
Pneumatic connection
(G)
Flow rate
[l/min]
Pressure dew point
reduction [K]
Temperature range
[°C]
Input pressure
[bar]
½...1
1)
300...1,000 17...20 2...50 3...12.5
1)
with connection plates
Pressure boaster – DPA
Boost up to twice the supply pressure•
Any assembly position in the compressed air network•
Maintenance-free•
Temperature range: 5...60 °C•
Free of paint-wetting impairment substance (LABS-free)•
Note:
Please refer to product data sheets for more technical details
Pa.Prod.Overview.indd 13
11/1/2012 2:31:52 PM
Component
Operating level
Remote I/O level
Remote I/O
Valve terminals
Field level
Solenoid valves
Accessories
Sensors
Actuators
Valves / process valves
Handheld
MMI
Electrical terminal
CPI
Modular electrical terminal
CPX
Ball valve
VZBC
Ball valve
VAPB/VZBA
Butterfly valve
VZAB
Pilot operated
VZWM / WZWP
Direct operated valve
VZWD
Angle seat valve
VZXF
Force pilot operated
VZWF
Semi rotary actuator
DFPB
Controlled linear actua-
tor DFPI
Manual semi rotary actuator
DAPS
Linear actuator
DLP
Semi rotary actuator
DRD/DRQ
Semi rotary actuator
DAPS
Analog / Binary
sensor box SRAP/SRBP
Proximity sensor
SME/SMT
Sensor box
QH-DR-E
Displacement encoder
MLO-POT
Sensor box
SRBF
Service unit
Push-in fittings
Couplings
Pressure boaster
DPA
Pilot valve
VOFD (Namur)
Pilot valve
VOFC (Namur)
Standard valve
NVF3 (Namur)
solenoid valve
VSNB (Namur)
Valve terminal
CPV
Valve terminal
MPA/MPA-F
Valve terminal
CDVI
Valve terminal for explosive areas
CPV Ex-i
Valve terminal
VTSA/VTSA-F
Front End Display
FED (Key)
Front End Display
FED (Touch)
Plastic tubings
Dryer
LDM1
Sensor box
DAPS
Product overview
Industry segments
Water & wastewater
Biotechnology / pharmaceutical
Food & beverage
Manual ball valve
CRQH
11/1/2012 2:33:02 PM
11/1/2012 2:33:02 PM
Systems
Customized System Automation concept
Customized System Automation concept
Hygenic butterfly valve
VZFA
Hygenic ball valve
VZBB
Direct operated valve
Controlled linear actua-
tor DFPI
Displacement encoder
MLO-POT
Pressure boaster
Modular valve terminal
CPX/MPA
Semi-rotary actuator DAPS
with ball valve VZBC
Semi-rotary actuator DAPS
with ball valve VZBB
Linear actuator DLP
with knife gate valve VZKA
Semi-rotary actuator DAPS
with butterfly valve VZSA
Semi-rotary actuator DFPB
with ball valve VAPB
Control cabinet for
automatic and manual
pneumatic operation
Units for high and low
temperature application
Compact performance
valve terminal CPV with
stainless steel cover
Customised control
cabinet solutions, also
for explosive areas
Semi-rotary actuator
DAPS with ball valve and
sensor box
Industrial Ethernet
Fieldbus
1. Centralised installation
Industrial Ethernet
Fieldbus
2. Decentralised installation
Industrial Ethernet
Fieldbus
3. Hybrid installation
(centralised / decentralised)
Pipping system
Mining
Chemical
Pulp / paper processing
Pa.Prod.Overview.indd 15
Pa.Prod.Overview.indd 15
Pa.Prod.Overview.indd 15
Pa.Prod.Overview.indd 15
Pa.Prod.Overview.indd 15
Australia
Head Office
Festo Pty. Ltd.
Melbourne
179 –187 Browns Road
Noble Park Nth VIC 3174
Call Toll Free: 1300 88 96 96
Call Toll Fax: 1300 88 95 95
Branch Offices
South Australia (Adelaide)
Call Toll Free: 1300 88 96 96
Queensland (Brisbane)
Call Toll Free: 1300 88 96 96
Western Australia (Perth)
Call Toll Free: 1300 88 96 96
New South Wales (Sydney)
Call Toll Free: 1300 88 96 96
China
Head Office
Festo (China) Ltd.
1156 Yun Qiao Road
Jinqiao Export Processing
Zone
201206 Pudong, Shanghai,
P.R. China
Tel: +86-21-6081 5100
Fax: +86-21-5854 0300
Branch Offices
Beijing
Tel: +86-10-65 15 50 96
Changchun
Tel: +86-431-88 96 90 30
Changsha
Tel: +86-731-8256 4272
Chengdu
Tel: +86-28-86 19 98 70
Chongqing
Tel: +86-23-63 63 68 66
Dalian
Tel: +86-411-83 60 63 56
Hangzhou
Tel: +86-571-87 22 37 97
Jinan
Tel: +86-531-88 11 39 10
Kunming
Tel: +86-871-8 23 51 26
Lanzhou
Tel: +86-931-2 35 35 19
Ningbo
Tel: +86-574-87 28 92 18
Nanjing
Tel: +86-25-86 81 91 18
Qingdao
Tel: +86-532-85 79 83 26
Shenyang
Tel: +86-24-23 25 00 92
Suzhou
Tel: +86-512-68 28 11 19
Tianjin
Tel: +86-22-26 26 40 76
Wuhan
Tel: +86-27-87 32 27 37
Wuxi
Tel: +86-510-82 75 53 88
Xiamen
Tel: +86-592-239 61 23
Xi’an
Tel: +86-29-62 66 92 96
Zhengzhou
Tel: +86-371-67 94 49 28
Hong Kong
Head Office
Festo Ltd
6/F New Timely Factory
Building,
497 Castle Peak Road,
Kowloon, Hong Kong
Tel: +852-27 43-8379
Fax: +852-27 86-2173
Branch Offices
Guangdong Province
Guangzhou
Tel: +86-20-8732 1613
Guangzhou Tianhe
Tel: +86-20-8600 3032
Shenzhen
Tel: +86-755-2650 5798
Dongguan
Tel: +86-769-2236 7890
India
Head Office
Festo Controls Pvt. Ltd.
237-B, Bommasandra
Industrial area,
Bangalore Hosur Highway,
Bangalore 560 099
Tel: +91-80-22894100
Fax: +91-80-27832058
Branch Offices
Ahmedabad
Tel: +91-79-26565836
Aurangabad
Tel: +91-240-2337961
Bangalore
Tel: +91-80-22277582
Baroda
Tel: +91-265 2975276
Chennai
Tel: +91-44-28554491
Coimbatore
Tel: +91-422-2499975
Hyderabad
Tel: +91-40-27700283
Kolhapur
Tel: +91-231-2660479
Kolkata
Tel: +91-33-22821276
Ludhiana
Tel: +91-161-2407742
Mumbai
Tel: +91-22-26673133
Nashik
Fax: +91-253-2316044
Delhi (Noida)
Tel: +91 (0)120-2460861
Pune
Tel: +91-20-25521401
Indonesia
Head Office
PT Festo
Jl. Sultan Iskandar Muda
no. 68
Arteri Pondok Indah
Jakarta 12240, Indonesia
Tel: +62-21-27 50 79 00
Fax: +62-21-27 50 79 98
Branch Offices
Bandung
Tel: +62-22-732 1329, 732
1330,
732 0753
Batam
Tel: +62-816 50 23 10
Cikarang
Tel: +62-21-893 67 49
Glodok
Tel: + 62-21-659 97 69-70
Makassar
Tel: +62-813 42 05 52 00
Medan
Tel: +62-61-453 89 35, 452
00 11
Semarang
Tel: +62-24-355 66 53, 355
48 24
Surabaya
Tel: +62-31-849 10 44, 841
05 12
Japan
Head Office
Festo K.K.
1-26-10 Hayabuchi
Tsuzuki-ku, Yokohama 224-
0025
Tel: +81-(0) 45-593-56 10/-
5611
Fax: +81-(0) 45-593-5678
Branch Office
Osaka
Tel: +81-(0)6-6320-3427
Korea
Head Office
Festo Korea Co., Ltd.
470-1 Gasan-dong
Geumcheon-gu
Seoul #153-803
Tel: +82-1666 0202
Fax:+82-(0) 2-864 7040
Branch Offices
Joongbu
Tel: +82-(0) 31-655 2951
Yeongnam
Tel: +82-(0) 55-289 7038
Daegu
Tel: +82-(0) 53-604 4365
Daejeon
Tel: +82-(0) 42-861 7797
Gwangju
Tel: +82-(0) 62-955 4168
Ulsan
Tel: +82-(0) 52-292 4215
Malaysia
Head Office
Festo Sdn Berhad
10 Persiaran Industri
Bandar Sri Damansara
52200 Kuala Lumpur
Tel: +(60 3) 62 86 80 00
Fax: +(60 3) 62 75 64 11
Branch Offices
Penang
Tel: +(60 4) 643 0918
Ipoh
Tel: +(60 5) 548 1002
Johor Bahru
Tel: +(60 7) 352 3719
Malacca
Tel: +(60 6) 335 1018
New Zealand
Head Office
Festo Ltd
20 Fisher Crescent
Mount Wellington
Auckland
Tel: +64-(09)-574-10 94
Fax: +64-(09)-574 10 99
Branch Offices
Christchurch
Tel: +64-(0)-33488796
Hamilton
Tel: 64-(0)-78466080
Philippines
Head Office
Festo Inc
Festo Building
KM 18, West Service Road
South Super Highway
1700 Paranaque City
Metro Manila
Tel: +63 (2) 77 66 888
Fax: +63 (2) 82 34 219
Branch Offices
Bacolod and Iloilo
Tel/Fax: +63 (34) 434 3341
Baguio
Tel: +63 (74) 447-0394
Batangas
Tel: +63 (919) 275-5857
Cebu
Tel: +63 (32) 345-1120/3017
Cagayan de Oro
Tel/Fax: +63 (88) 857-4904
Davao/Zamboanga
Tel/Fax: +63 (82) 221-4586
General Santos City
Tel: + 63 (83) 382-0005
Iligan
Tel/Fax: +63 (63) 225-9201
Tarlac/Pampanga/Bataan/
Subic
Tel/Fax: +63 (45) 455-3020
Mobile Phone: +63 (928)
502-8288
Singapore
Festo Pte Ltd.
6 Kian Teck Way
Singapore 628754
Tel: +65-62640152
Fax: +65-62611026
Taiwan
Head Office
Festo Co.Ltd
9 Kung 8th Road
Linkou 2nd Industrial Zone
Linkou Dist., New Taipei City
24450 Taiwan, R.O.C.
Tel: +886-2-2601-9281
Fax: +886-2-26019286-7
Branch Offices
Hsinchu
Tel: +886-3-658-8318
Taichung
Tel: +886-4-2475-7278
Kaohsiung
Tel: +886-7-384-2856
Thailand
Head Office
Festo Ltd.
67/1 Phaholyothin Road
Klong 1, Klong Luang
Pathumthani 12120
Tel: +66 (0) 29 01 88 00
Fax: +66 (0) 29 01 88 33
Branch Offices
Laemchabang/Chonburi
Tel: +66 (0) 38 33 06 04
Saraburi
Tel: +66 (0) 36 31 54 10
Vietnam
Head Office
Festo Co., Ltd
(Cong Ty Tnhh Festo)
No. 1515-1516
Vanh Dai Dong Street
Ward An Phu, District 2
Ho Chi Minh City
Tel: +84 (8) 62814453-4454
Fax: +84 (8) 62814442
Branch Office
Hanoi
Tel: +84 (4) 35 56 15 08-1509
www.festo.com
PA.R3.11.01.12
Pa.Prod.Overview.indd 16
11/1/2012 2:33:47 PM