Guide rail components

stophuskSoftware and s/w Development

Nov 2, 2013 (3 years and 11 months ago)

84 views

Adjustable guide rail brackets, polyamide
329
Adjustable guide rail brackets, polyamide
Introduction
The adjustable guide rail brackets, polyamide, include
components for construction of a wide variety of guide
rail configurations. This includes basic types as well as
high and wide guide rails in various adjustable configura-
tions. How to combine the various components is best
understood by studying the examples on the following
pages.
Components
Basic building blocks for adjustable brackets:
 Guide rail bracket supports (four types)
 Guide rail clamp supports (two types)
 Guide rail clamps
 Support tube 18 mm (aluminium)
 Cross connector
 Corner connector
Accessory components
 Spacers to increase the track width.
 Spacer beam (aluminium), for large increases in track
width. The beam is available with or without T-slots on
the sides.
 Star knob for easy adjustment of guide rail height and
width.
Materials
Except where otherwise noted, the guide rail bracket
components are made of glass-fibre reinforced polya-
mide.
Track width calculations
Basic parameters
The calculations of resulting track width require insertion
of values for beam width W
B
and spacer width A. See
Tables 1 and 2. A is the sum of all spacers on one side.

Parameters W
B
and A
Table 1. Beam width Table 2. Spacer width
System W
B
mm Spacer mm
XS
45
XLRD 6 A
6
XL 65 XLRD 18 A 18
XM
85
XLRD 3 D
3
XH, XK 105 XLRD 15 K 15
XB
182
XLRN 3
Custom width
XLRN 3 U Custom width
W
B
A