Ergonomic Series 2013

stophuskSoftware and s/w Development

Nov 2, 2013 (3 years and 7 months ago)

278 views

GERmAn InnovATIon
No. 1 / 2013
Ergonomic Series 2013



Development Partner:
German Sport University Cologne
P. 2 Road Saddles
P. 8 Road Seatposts
P. 10 MTB Saddles
P. 14 Contour Pedals
P.16 Pedal Cleat Adjustment System
P.17 Reportage Topeak-Ergon Racing Team
P. 18 Racing Grips
P. 20 Performance Comfort Grips
P. 26 Technical Grips
P. 27 Reportage Ergon Factory Rider
P. 28 Gloves
P. 32 Backpacks
2
WWW.ERGON-BIKE.COM
Road Racing
Form follows Ergonomics.
3
WWW.ERGON-BIKE.COM
Road Racing
3D Progressive Setup
4
WWW.ERGON-BIKE.COM
Saddle Ergonomics in every detail.
For Road Cyclists.
Road Racing
multi-layer padding / 3D Progressive Setup
At the rear of the saddle the padding is made up of a combination of two different
lightweight padding foam compounds. The top layer is softer and more elastic,
allowing it to mould to the rider. The lower layer is a harder foam, which allows for
progressive damping under the sit-bone area, and prevents the rider’s sit-bones
coming into contact with the saddle shell. This combination allows a significant
increase in comfort.
Surface topography
The surface shape is formed for precisely the
typical road bike sitting position.
5
WWW.ERGON-BIKE.COM
Road Racing
3D saddle shell
Ultra-thin, flex optimized 3d saddle shell (composite, or carbon composite on the
Pro / Pro Carbon model). Shell is formed with 3d ‘pockets’ in the area of the sit
bones to accommodate additional padding. Y-Flex design at the shell’s edge
allows for maximum freedom of movement.
Isolated saddle shell
In order to achieve optimum flex from the Y-Flex shell, the rail mounts have been
positioned right at the back and front of the saddle, not under the sit bones. The
size large saddle has the rails positioned 8mm further forward to allow tall riders
sufficient setback.
Hand made exclusivity
All SR3 saddles are hand made in Italy
by Selle Italia.
6
WWW.ERGON-BIKE.COM
Monolink
®
version of the SR3 Pro Carbon, the same features, but with
a Monolink
®
rail. Friction minimizing silicon coating prevents chaffing.
Soft, breathable, easy to clean, synthetic leather Alocosto micro-fibre
cover. Available in sizes S and M for a perfect fit for all riders.
New SR3 Pro Carbon
Monolink
®
Sizes
Weight
Rail
Shell
Use
mSRP
• S (Small), M (Medium)
• S: 190 g, M: 210 g (approximate)
• Carbon Composite Monolink
®
• Carbon Fibre Ultra Thin Y-Flex Construction
• Road
• $ 199,95
New SR3 Pro Carbon
Range topping new SR3 saddle. Avail-
able with superlight carbon fibre rails,
or Monolink® carbon composite saddle
rails for maximum adjustment. Weighing
under 200 g in size M. Available in sizes
S, M and L for an exact fit for all riders.
Sizes
Weight
Rail
Shell
Use
mSRP
• S (Small), M (Medium), L (Large)
• S: 180 g, M: 200 g, L: 205 g (approximate)
• Carbon
• Carbon Fibre Ultra Thin Y-Flex Construction
• Road
• $ 239,95
440 500 20 SR3-S Pro Carbon
440 500 25 SR3-M Pro Carbon
440 500 27 SR3-L Pro Carbon
440 501 20 SR3-S Pro Carbon white
440 501 25 SR3-M Pro Carbon white
440 501 27 SR3-L Pro Carbon white
440 500 60 SR3-S Pro Carbon Monolink
®
440 500 65 SR3-M Pro Carbon Monolink
®

440 501 60 SR3-S Pro Carbon Monolink
®
white
440 501 65 SR3-M Pro Carbon Monolink
®
white
Road Racing
Size
Sit bone measurement
Small
9 - 11 cm
medium
11 - 13 cm
Large
13 - 15 cm
New: 3 Saddle Widths
7
WWW.ERGON-BIKE.COM
The entry level version of the SR3 saddle is still packed with
innovation. For example the 3D form of the saddle shell allows for
significantly more padding where the riders weight sits on the saddle,
while the specially placed strengthening ribs in the ultra-thin carbon
shell provide uniform flex and increased comfort. 3 saddle sizes
ensure that the appropriate width is available for different riders and
positions on the bike. Size specific saddle mounts are 8mm further
forward on the size L saddles to allow larger riders adequate setback.
Available in sizes S, M and L for the perfect fit for all riders.
New SR3
Sizes
Weight
Rail
Shell
Use
mSRP
• S (Small), M (Medium), L (Large)
• S: 245 g, M: 270 g, L: 280 g (approximate)
• TiNox
• GFK-Composite
• Road
• $ 139,95
Mid range SR3 saddle. Features as the SR3, but with a lighter carbon
composite shell. Friction minimizing silicon coating prevents chaffing.
Soft, breathable, easy to clean, synthetic leather Alocosto micro-fibre
cover. Available in sizes S, M and L for a perfect fit for all riders.
New SR3 Pro
Sizes
Weight
Rail
Shell
Use
mSRP
• S (Small), M (Medium), L (Large)
• S: 215 g, M: 235 g, L: 245 g (approximate)
• TiNox
• Carbon Fibre Ultra Thin Y-Flex Construction
• Road
• $ 169,95
440 500 00 SR3-S
440 500 05 SR3-M
440 500 07 SR3-L
440 500 10 SR3-S Pro
440 500 15 SR3-M Pro
440 500 17 SR3-L Pro
440 501 10 SR3-S Pro white
440 501 15 SR3-M Pro white
440 501 17 SR3-L Pro white
Road Racing
8
WWW.ERGON-BIKE.COM
CF3 Pro Carbon.
Weight
material
Use
mSRP
• approx. 220 g
• Carbon Fibre
• Road
• $ 249,95
Ergon presents a brand new innovative seat post for the road. The
post offers a uniquely comfortable ride while remaining lightweight,
making it ideal to match to today’s ultra-stiff road frames. The
seatpost is designed to flex offering added suspension, killing road
buzz and soaking up imperfections in the road surface.
The saddle moves backwards in arc motion, with the carbon
suspension beams (Canyon VCLS Technology) equipped with pivots
to ensure the saddle remains horizontal.
The system is maintenance free, offers simple setback and saddle
angle adjustment, and weighs in at about 220 g.
Eurobike Award 2012 Winner
New CF3 Pro Carbon
430 000 20 CF3 Pro Carbon - 7 x 7 mm (for round rails)
430 000 21 CF3 Pro Carbon - 7 x 9 mm (for oval rails)
Road Racing
9
WWW.ERGON-BIKE.COM
The Comfort Revolution for Road Cyclists.
Perfect function
At the heart of the seatpost are two parallel carbon flat springs.
The seatpost head has two bearings allowing it to stay parallel
to the ground through the travel motion. The function is simple.
A bump through the bike pushes the bike upwards, the seatpost
flexes in the exact opposite direction (see image) allowing the
bump to be neutralised. This is a lot more efficient than a tradi-
tional suspension post. The post keeps that ‘direct’ road bike
feel, but the VCLS flat springs are sensitive to small variations in
road surface. A genuine comfort revolution, lightweight and
maintenance free.
Compression direction
Shock impact forces
Floating pivot Flip Head prevents the saddle angle changing
as the post compresses.
Flip Head can be rotated for Increased adjustment
for a more fore or aft position.

VCLS carbon fibre flat springs for pre-defined flex.
Development partner
Road Racing
10
WWW.ERGON-BIKE.COM
* Measured in the pre-upholstered state. ** Variance is possible.
100% Ergonomics. 100% Mountain Biking.
Designed from the ground up, Ergon’s ergonomically optimized Mountain Bike Saddle
combines high performance and fit in a previously unobtainable way. A 3D saddle
shell - innovative ‘hollows’ in the shell - allow for considerably more damping material
in the seat bone areas, than any other saddle in this category.
1: Ultra-thin, flex optimized carbon or GFK saddle shell with isolated rear mounting
rails for added flex. 2: Innovative, multi-layered cushioning with progressive damping.
Tuned damping correlates with saddle width / use. 3: Nose mounted micro damper.
4: Saddle nose underside rubber cushion for shouldering the bike. 5: Chaff-reducing
silicon coating on Pro and Carbon Pro models. 6: Optional standard rails, or
Monolink
®
rail system (patent pending) allowing for maximum adjustment. All SM3
saddles are designed and engineered in Germany and manufactured by hand by
Selle Italia in Italy.
1
2
3
5
6
4
Which is the correct saddle width?
Scientific studies have concluded that in order for a saddle to be comfortable, it
must match the individual sit bone width of the rider. This distance however
changes depending on the angle at which the rider’s upper body is at. If the rider
sits upright on the saddle, it is the rear parts of the sit bones which take their
weight. As the rider leans more forward, then the point of the sit bone which makes
contact rolls forwards. As the pelvis is also V formed towards the front, the contact
area on the saddle needs to be large enough to provide comfort in different sitting
positions. Ergon saddles are designed around the male pelvis form. For riders with a
sit bone width of 9 - 11 cm we suggest size S, and for those with a sit bone
distance of 11 - 13 cm we suggest M. For riders with a wider measurement, of 13
- 15 cm size L is correct. There is some cross over, so we suggest test riding where
possible.
Recommended Sizes**
3D Progressive Setup
Ultra-thin, flex optimized, carbon composite 3D saddle shell (Carbon Composite only
on Pro / Carbon Pro models). Saddle shell is formed with 3D pockets under the sit
bones allowing for extra padding. Y-Flex nose to seat design provides maximum
freedom of movement when pedalling.
Highly elastic
comfort padding
Internal harder
padding
Saddle shell with
3D pockets
State of the Art
Saddle Development
The Ergon Product Development
Department utilized state of the art
simulations, construction methods and
analysis in the development of the SM3.
For example when creating the Ultra-thin
saddle shell, FEM analysis was
fundamental in mapping the load and
stress areas. The shape of the saddle from
top to bottom was defined in the Ergon
Ergonomics Laboratory using a multitude
of pressure sensing equipment combined
with real world experience on test rides.
With this, many iterations lead to the final
shape.
1. FEM analysis used in development
process: Maximum deflection 6.19054mm*
2. Saddle shell designed with homogenous
flex throughout.
1 2
MTB-Racing
Saddle Size
Sit bone width
Small
9 - 11 cm
medium
11 - 13 cm
Large
13 - 15 cm
11
WWW.ERGON-BIKE.COM
Super-light top of the range World Cup Team model. Flex Optimized Carbon
Composite saddle shell. Super-light Carbon Fibre saddle rails. Friction minimizing
silicon coating prevents chaffing. Soft, breathable, easy to clean, synthetic leather
Alocosto micro-fibre cover. Alcantara
®
rear section. Available in sizes S, M and L for
different sit-bone distances.
Sizes
Weight
Rails
Cover
Shell
Use
mSRP
• S (Small), M (Medium), L (Large)
• S: 179 g*, M: 184 g*, L: tba (approximate)
• Carbon
• Alocosto Micro Fibre, Alcantara
®
Rear Section
• Carbon Fibre Ultra Thin Y-Flex Construction
• Mountain Bike Racing, Cross Country, Marathon
• $ 239.95
440 000 20 SM3-S Pro Carbon
440 000 25 SM3-M Pro Carbon
440 002 27 SM3-L Pro Carbon

440 001 20 SM3-S Pro Carbon White
440 001 25 SM3-M Pro Carbon White
440 001 27 SM3-L Pro Carbon White
white
New SM3 Pro Carbon
* Weights may vary owing to manufacturing tolerances.
MTB-Racing
Size
Sit bone measurement
Small
9 - 11 cm
medium
11 - 13 cm
Large
13 - 15 cm
New: 3 Saddle Widths
12
WWW.ERGON-BIKE.COM
Flex Optimized Carbon Composite saddle shell. Lightweight Tinox
hollow rails. Friction minimizing silicon coating prevents chaffing. Soft,
breathable, easy to clean, synthetic leather futura
®
micro-fibre cover.
Diamantino rear section. Available in sizes S, M and L for different
sit-bone distances.
Sizes
Weight
Rails
Cover
Shell
Use
mSRP
• S (Small), M (Medium), L (Large)
• S: 213 g*, M: 218 g*, L: tba (approximate)
• TiNox
• Futura
®
Mirco Fibre, Diamantino
®
Rear Section
• Carbon Fibre Ultra Thin Y-Flex Construction
• Mountain Bike Racing, Cross Country, Marathon
• $ 169.95
440 000 10 SM3-S Pro
440 000 15 SM3-M Pro
440 000 17 SM3-L Pro

440 001 10 SM3-S Pro White
440 001 15 SM3-M Pro White
440 001 17 SM3-L Pro White
Flex Optimized GFK saddle shell. Lightweight Tinox hollow rails. Soft,
breathable, easy to clean, synthetic leather futura
®
micro-fibre cover.
Available in sizes S, M and L for different sit-bone distances.
Sizes
Weight
Rails
Cover
Shell
Use
mSRP
• S (Small), M (Medium), L (Large)
• S: 218 g*, M: 223 g*, L: tba (approximate)
• TiNox
• Futura
®
Micro Fibre
• GF-Composite Ultra Thin Y-Flex Construction
• Mountain Bike Racing, Cross Country, Marathon
• $ 139.95
440 000 00 SM3-S
440 000 05 SM3-M
440 000 07 SM3-L
white
* Weights may vary owing to manufacturing tolerances.
SM3 Pro
SM3
MTB-Racing
13
WWW.ERGON-BIKE.COM
440 000 60 SM3-S Pro Carbon Monolink
®
440 000 65 SM3-M Pro Carbon Monolink
®
440 001 60 SM3-S Pro Carbon Monolink
®
White
440 001 65 SM3-M Pro Carbon Monolink
®
White
Sizes
Weight
Rails
Cover
Shell
Use
mSRP
• S (Small), M (Medium)
• S: 189 g*, M: 194 g*
• Carbon Composite Monolink
®
• Alocosto
®
Micro Fibre, Alcantara
®
Rear Section
• Carbon Fibre Ultra Thin Y-Flex Construction
• Mountain Bike, Cross Country, Marathon
• $ 199.95
Super-light top of the range World Cup Team model. Flex Optimized
Carbon Composite saddle shell. Monolink
®
carbon composite saddle
rails for maximum adjustment. Friction minimizing silicon coating
prevents chaffing. Soft, breathable, easy to clean, synthetic leather
Alocosto
®
micro-fibre cover. Alcantara
®
rear section. Available in sizes
S and M for different sit-bone distances.
white
SM3 Pro Carbon
Monolink
®
* Weights may vary owing to manufacturing tolerances.
MTB-Racing
14
WWW.ERGON-BIKE.COM
Optimized power transfer, foot position,
and leg motion with normal shoes - PC2.
Dr. Kim Tofaute
Sports Ergonomist
“From an ergonomic perspective pedals should not be overlooked for achieving optimized fit for bike and rider. Pedals are the
point where muscle power is transferred to the bike, and therefore correct positioning of the foot and the leg is essential.
Additionally incorrectly positioned feet and legs are the cause of knee complaints, so getting this right improves comfort as well
as efficiency. The Ergon PC2 Contour Pedal uniquely addresses all of these factors with its contoured platform, inner-stop
guide and narrow q-factor.”
Oversized integrated reflectors.
Development partner:
Busch & Müller, Germany
Superlight pedal body
made from high performance
GF-Composite.
Development Partner:
Magura, Germany.
Ultra-Narrow axle
constructions reduces
Q-Factor, and is
biomechanically more
efficient.
Maintenance free polymer
bearings with radial seals.
Development partner:
Igus
®
, Germany.
Inner-stop for intuitively
correct foot positioning
on the pedal.
Anatomically contoured
platform, 6° angle for better
joint allignment, varus (knee)
angle correction. Optimizes the
biomechanics of the leg (hip-
knee-foot). Increases efficiency,
minimizes knee complaints
and hot spots / numbness in
the feet.
3M-SafetyWalk™ creates a
slip free platform and increases
power transfer.
Dramatically increased contact area between shoe and pedal – increases power transfer and energy efficiency, reduces concentrated pressure points on the feet.
Performance Comfort
15
WWW.ERGON-BIKE.COM
The PC2 redefined the market for touring / commuting / everyday pedals. The
PC2 Evo takes this one step further. Using lightweight materials, such as a carbon
composite pedal body, and hollow mat chromed axle, the weight has further
reduced. Other high end details are the CNC machined aluminium axle cap, and
white integrated reflectors* for increased visibility.
Shoe Size
material
Use
Bearings
mSRP
• Small (max. EU 42 / UK 7.5 / US 8.5)
Large (min. EU 43 / UK 8 / US 9)
• Carbon Composite
• Touring, Commuting, General Riding
• Maintenance free polymer bearing
• $ 99.95

480 100 02 PC2-S Evo Silver Edition* (Pair)
480 100 12 PC2-L Evo Silver Edition* (Pair)
480 100 01 PC2-S Evo (Pair)
480 100 11 PC2-L Evo (Pair)
* Please check local traffic regulations - may or may not be road legal.
Shoe Size
material
Use
Bearings
mSRP
• Small (max. EU 42 / UK 7.5 / US 8.5)
Large (min. EU 43 / UK 8 / US 9)
• Superlight GF-Composite
• Touring, Commuting, General Riding
• Maintenance free polymer bearing
• $ 79.95
A more efficient pedal. Ergon introduces the PC2 Contour Pedal to provide an
ergonomic and positive connection between bike and user. The first pedal designed
with biomechanics and correct foot position in mind. Advantages are increased
power transfer, more control and fewer hot spots and knee complaints. The Ergon
PC2 is the first non SPD-type pedal constructed with the ergonomic biomechanical
demands of the user as a priority.

480 100 00 PC2-S (Pair)
480 100 10 PC2-L (Pair)
PC2
2010
2011
materialvision 2011
PC2 Evo.
Performance Comfort
Silver Edition
Standard
16
WWW.ERGON-BIKE.COM
480 000 00 TP1 Shimano SPD
®
compatible
480 000 01 TP1 Shimano SPD - SL
®
compatible
480 000 10 TP1 crankbrothers
®
compatible
480 000 05 TP1 LOOK KéO
®
compatible
Shoe Size
material
Contents
mSRP
• One fits all
• Tech. Polypropylene
• TP1, Handbook, Reference stickers
• $ 29.95
no loss in power.
The first ever tool for simple yet fast and precise installation of cleats.
The critical interface. The energy that goes into cycling is transferred via the pedal,
shoe and cleat. Ergonomics in this area plays a massive role. Without an ergonomic
setup power and performance will be lost. Comfort will be compromised. Injury could
result. Correctly installed cleats are noticeable from the first ride. The Ergon TP1
allows the accurate adjustment of the three axis which are important when installing
cleats. The fore/aft position, the stance (Q-Factor) and the foot angle. It is simple, fast
and effective.
The tool is completed by a small handbook. This is a guide to basic ergonomics
of the foot and leg, the biomechanic consequences and a simple step by step
manual for using the TP1. For expert users information is provided about maximising
performance. The tool is a favourite of Pro road and MTBers.
IF Eurobike Award Gold Winner 2008
reddot Design Award Winner 2010
1. Fore / Aft adjustment 2. Adjusting the stance (Q-Factor) 3. Adjusting the cleat angle
The crankbrother‘s Eggbeater pedal system is a favorite
of many, and therefore we jumped at the chance of
designing a TP1 for the specific needs of these users.
Accurate, simple and precise cleat (re)placement is now
possible.
crankbrothers
®
compatible
2008
SPD
®-
SL users, one of the most popular road pedal
systems, can now benefit from the accuracy and piece
of mind offered by an Ergon TP1. The tools form allows
all regularly sized road shoes to be set up correctly for
more performance and long-term comfort on the bike.
Shimano SPD - SL
®
compatible
Look KeO
®
users, one of the most popular road pedal
systems, can now benefit from the accuracy and piece
of mind offered by an Ergon TP1. The tools form allows
all regularly sized road shoes to be set up correctly for
more performance and long-term comfort on the bike.
LOOK KéO
®
compatible
TP1 Pedal Cleat Tool

Shimano SPD
®
compatible
LOOK KéO
®
compatible
Irina Kalentieva
www.irina-kalentieva.com
Alban Lakata
www.albanlakata.com
Ira is one of the strongest mountain bikers worldwide.
A long list of championships, wins and medals
underlines this. 2 World Championship Titles, an
Olympic Medal and countless national titles. Silver in
the World Championships in 2010 she has ridden for
Team Topeak Ergon since 2006. She is a member
of the family and provides valuable input for product
development.
XC World Championship Silver 2010
XC World Champion 2009 and 2007
olympic XC Bronze 2008
Hard on himself, hard on the bike, hard on his
competition - the Albanator. “He is like a dirtbike.
When others are worn out and backing off, he knocks
it down a gear and disappears into the distance,” the
words of team Mechanic Lars Hartwich. It works for
him. 2010 World Marathon Champion and a complete
weight weenie - he pushes the product development
hard too.
marathon World Champion 2010
marathon World Championship Silver medal 2009
European marathon Champion 2008
17
WWW.TOPEAK-ERGON.COM
There aren’t many real Legends in the MTB scene, but Dave Wiens
is one of the few. For over 20 years he has raced against, and quite
often beaten the best in the World. A career that has seen him as the
US National Champion twice, he has managed as well as raced for
teams. His status was officially recognised in 2002 with his admission
to the “Mountain Bike Hall of Fame”.
In 2009 the score was settled as Dave fought to win his seventh
Leadville 100, against amongst others, Lance Armstrong (who he
had beaten in 2008). Finishing second to Lance though is something
only Alberto Contador can better! With Wiens’ experience his input to
Ergon cannot be quantified.
Topeak-Ergon Racing Team
www.topeak-ergon.com
Since 2005 Topeak-Ergon Racing Team has been one of the most
successful Professional Mountain Bike Teams worldwide. World XC
Champion, World Marathon Champion, European Marathon
Champion, World 24h Championships Pairs Silver, German National
Champion - a few of the successes the team has in the last five years..
Topeak-Ergon Racing Team is an essential part of the research and
development into new products, flowing feedback directly into the core
of product development.
Ergon’s support does not stop with Topeak-Ergon Racing Team.
Through our international distributors Ergon can be seen being used
by top-level athletes Worldwide. From Japan to the United Kingdom,
Brazil to Italy. Many top riders demand they ride Ergon. We also
support many local events, where the unsung heroes, the end users,
get to experience Ergon.
Dave Wiens
www.topeak-ergon.com













The marathon Grip.
Developed as a specific marathon grip, the
GS1 has become the XC and endurance
racer’s grip of choice. The grip’s unique
internal construction supports the hand
using two internal supports individually
tuned for perfect rebound and control.
The lightweight leichtbau Direct Control
rubber ensure ultimate feel and feedback.
Available in two sizes.
Sizes
Weight
Clamp
Use
mSRP
• S (Small), L (Large)
• ca. 155 g* (Large) / 146 g* (Small)
• Aircraft Aluminum
• Mountain Bike, Marathon, XC
• $ 39.95
424 000 12 GS1-S
424 600 14 GS1-S White
424 000 17 GS1-L
424 600 19 GS1-L White
Racing
18 WWW.ERGON-BIKE.COM
The brand new grip of the 2010 World
marathon Champion Alban Lakata.
Especially tuned for Endurance riding.
White
A new standard.
The GS grip series offers an optimized balance of comfort and performance required
by top endurance athletes. A completely new grip from the ground up, it uses
DirectControl Leichtbau rubber to keep the weight down. This is combined with a
new, more cushioned form to protect the hands better on all day rides, 24 hour and
marathon, or XC racing. The grip has 3 distinct areas, using different compounds
and textures to provide grip and comfort as required. The GS2 Carbon adds a
independently adjustable 3 finger bar end from 100% carbon (50 g each bar end).
424 000 52 GS2-S Carbon
424 000 57 GS2-L Carbon
Sizes
Weight
Barend
Use
mSRP
• S (Small), L (Large)
• ca. 220 g* (Large) / 212 g* (Small)
• 100% Carbon
• Mountain Bike, Marathon, XC
• $ 99.95
GS1
GS2 Carbon
Annodized, highly secure
lightweight aluminum
clamp.
A new design from the ground
up - designed for endurance
and XC riding.
Reduced wing for
easier hand
positioning.
DirectControl Leichtbau rubber
for precise feedback and
optimized damping.
* Weight per pair, without end plugs (where applicable).
White
Sizes
Weight
Barend
Use
mSRP
• S (Small), L (Large)
• ca. 231 g* (Large) / 222 g* (Small)
• GF-Composite with rubber inserts
• Mountain Bike, Marathon, XC
• $ 59.95
Using the grip body as the GS2 Carbon, the GS2 adds an
innovative GFC 3 finger bar
end
. Featuring non-slip rubber inserts, the bar end doubles as the clamp, allowing both the
grip and the bar end to be independently adjusted.
424 000 32 GS2-S
424 600 33 GS2-S White
424 000 37 GS2-L
424 600 38 GS2-L White
19
WWW.ERGON-BIKE.COM
Racing
Sizes
Weight
Barend
Use
mSRP
• S (Small), L (Large)
• ca. 289 g* (Large) / 280 g* (Small)
• GF-Composite with rubber inserts
• Mountain Bike, Marathon, XC
• $ 69.95
The GS3 is the bigger brother of the GS2. Using the same grip body, the
benefits of Leichtbau DirectControl rubber and the new endurance design have been
combined with a full sized GF-Composite bar end. Featuring non-slip rubber inserts,
the bar end doubles as the clamp for grip allowing both to be individually angled.
424 000 92 GS3-S
424 000 97 GS3-L
GS2
GS3
20
WWW.ERGON-BIKE.COM
Performance Comfort
The GC1 is a grip developed for the ergonomic demands of users of
bicycles with backwards-swept handlebars, such as those found on
city bikes. Using tradition grips on these bikes causes a kink in the
wrist. The GC1 corrects this wrist position through its anatomic and
ergonomically correct form. Any aches and tension can therefore be
reduced. The GC1 is made from German developed, certified toxin
free and UV stable rubber compounds. Specially positioned textures
and different compound hardness ensure maximum comfort, and a
secure grip.
New GC1
variants
Clamp
Use
mSRP
• Regular | Nexus
®
• Forged Aluminum
• City bike, holland bike, commuting
• $ 29.95
424 100 10 GC1
424 102 10 GC1 Nexus
®
compatible
Brand new premium leather grip. Innovative in mould leather technol-
ogy designed in co-operation with bespoke footware maker Quoc
Pham. Using leather sourced in Bavaria, Germany, following strict
rules regarding toxins, the Alpine raw hide leather is dyed using
vegetable dyes, and no heavy metals are used in its production. The
leather is ‘open pore’ and is certified hypoallergenic. Available in a
single size.
New GP1 BioLeder
variants
Clamp
Use
mSRP
• Regular
• 100% recyclable aluminum (silver or black)
• Touring, Commuting
• $ 79.95
424 000 00 GP1 BioLeder (black clamp)
424 000 01 GP1 BioLeder (silver clamp)
21
WWW.ERGON-BIKE.COM
Performance Comfort
GP1
Ergon’s original and ground breaking GP1 continues to set standards. Offering
optimal pressure distribution and available in two sizes, it features a forged aluminum
clamp for fast and secure installation. Adjustment of the support platform is achieved
by simply loosening the clamp bolt and positioning the grip to the desired neutral
position.
variants
Sizes
Barend
Use
mSRP
• Regular | Gripshift
®
| Rohloff
®
/Nexus
®
• S (Small), L (Large)
• Forged Aluminum
• Mountain Bike, Touring, Commuting
• $ 29.95
424 000 10 GP1-S
424 001 10 GP1-S Gripshift
®
compatible
424 002 10 GP1-S Rohloff
®
/ Nexus
®
compatible
424 000 15 GP1-L
424 001 15 GP1-L Gripshift
®
compatible
424 002 15 GP1-L Rohloff
®
/ Nexus
®
compatible
The 2 finger GFC bar end delivers increased grip thanks to the rubberized anti-slip
lower texture, and optimized ergonomics. Bar end and grip body can be infinitely
independently adjusted dependent on preference.
2/2007
“Excellent”
2/2008
2004
variants
Sizes
Barend
Use
mSRP
• Regular | Gripshift
®
| Rohloff
®
/Nexus
®
• S (Small), L (Large)
• GF-Composite with rubber inserts
• Mountain Bike, Touring, Commuting
• $ 39.95
424 000 28 GP2-L
424 001 28 GP2-L Gripshift
®
compatible
424 002 28 GP2-L Rohloff
®
/ Nexus
®
compatible
424 000 23 GP2-S
424 001 23 GP2-S Gripshift
®
compatible
424 002 23 GP2-S Rohloff
®
/ Nexus
®
compatible
GP2
variants
Sizes
Barend
Use
mSRP
• Regular | Gripshift
®
| Rohloff
®
/Nexus
®
• S (Small), L (Large)
• GF-Composite with rubber inserts
• Commuting, Touring
• $ 49.95
GP3
Composite
3 Finger Bar End
with rubberized texture.
Smooth texture prevents
thumb rub
Optimized pressure
distribution prevents
numbness and aching.
Plastic intnernal skeleton
supports the wrist while soft
rubber ensured sufficient
damping.
Two densities of
hypo-allergenic rubber
ensure comfort, precise
steering and damping -
keeping you in control.
Asymmetric form follows
the anatomic specifics
of both the left and right
hand.
424 000 36 GP3-L
424 001 36 GP3-L Gripshift
®
compatible
424 002 36 GP3-L Rohloff
®
/ Nexus
®
compatible
424 000 31 GP3-S
424 001 31 GP3-S Gripshift
®
compatible
424 002 31 GP3-S Rohloff
®
/ Nexus
®
compatible
The GP3 features a GF-Composite 3-finger bar end with anti-slip rubber inserts. Its size
and shape are ideal for small to medium sized hands (Size S: 6.5 – 8.5) as well as for
medium to larger sized hands (Size L: 8.5 – 10.5). The bar end and the grip platform
can be independently adjusted for the correct support angle and provides the
perfect fit for your individual riding style.
22
WWW.ERGON-BIKE.COM
Performance Comfort
Grip Compound - Made in Germany
Ergon’s product development team doesn’t only focus on Ergonomics
- material research is also a core theme. The demands and testing our
products undergo meet those of the automotive industry, and far exceed the
industry standard. Ergonomics, Product Design and Engineering - everything
is done in-house in Germany. It is from this that successful projects have
been born, such as our GreenLab initiative, which explores the use of
sustainable materials. For 2011 we quietly introduced what is a major
milestone in our development. All grips in the Performance Comfort Series
were switched to a new rubber compound. As part of this process 39 rubber
compounds were developed and tested. It was worth it, the new material
- made in Germany - meets the highest standards, is longer lasting and
worldwide is exclusive to Ergon for the bicycle industry.
• Developed and Manufactured in Germany
• Extremely high UV resistance - corresponds to automotive standards
• Contaminant Free - Only medically approved ‘white oil’ used in production
• All raw materials meet the standards set for use in food production -
EU (2002/72/EG)
• All raw materials meet the purity standards of European
Resolution AP(89)1
• Free of PAK - no Phthalates used in production
• SGS TÜV certification (raw material safety certification)
• Highest quality standard within the bicycle industry
variants
Sizes
Barend
Use
mSRP
• Regular | Gripshift
®
| Rohloff
®
/Nexus
®
• S (Small), L (Large)
• GF-Composite with rubber inserts
• Commuting, Touring
• $ 69.95
In some situations people simply need more hand positions.
Employing the much proven ergonomic grip body of the GP1, the
GP5 introduces a hollow formed glass fiber reinforced ergonomically
shaped bar end. Featuring rubberized inserts for positive grip, like all
of Ergon’s bar ends it can be independently positioned relative to the
grip and acts as the clamp preventing accidental rotation. The grip
itself is available in two sizes.
GP5
The GP4 offers the recognized class leading ergonomics of all
Ergon Performance Comfort Series grips, combined with a full size,
ergonomic, angle adjustable bar end. This doubles to clamp itself and
the independently adjustable grip into position. The bar end features
rubberized inserts for a firm slip free hold.
variants
Sizes
Barend
Use
mSRP
• Regular
• S (Small), L (Large)
• GF-Composite with rubber inserts
• Mountain Bike, Touring, Commuting
• $ 59.95
23
WWW.ERGON-BIKE.COM
Performance Comfort
424 000 75 GP5-L
424 001 75 GP5-L Gripshift
®
compatible
424 002 75 GP5-L Rohloff
®
/ Nexus
®
compatible
424 000 70 GP5-S
424 001 70 GP5-S Gripshift
®
compatible
424 002 70 GP5-S Rohloff
®
/ Nexus
®
compatible
424 000 95 GP4-L
424 000 90 GP4-S
GP4
3/2009
7-8/2009
1/2010: “Very good”
2009

24
WWW.ERGON-BIKE.COM
Performance Comfort
The GP1 BioKork provides ultimate ergonomics for the hand just
as the rest of Ergon’s Performance Comfort series do, however
the unique qualities of cork means that it is antibacterial and
hypoallergenic. Cork’s natural damping qualities also make it an ideal
grip material, and its now density mean the resulting grip is a lot lighter.
The GP1 BioKork uses 40% cork, sourced from sustainable forests in
Portugal which is certified for its ecologically sound production. This
ecological theme is continued throughout the rest of the grip. The inner
core is plastic reinforced using natural fibre, which make up 40% of its
mass. In place of mineral oil, the gel in the palm section of the grip is
vegetable oil based. The clamp can also be 100% recycled. It is all a
result of Ergon’s “GreenLab” initiative.
variants
Sizes
Clamp
Use
mSRP
• Regular | Gripshift
®
| Rohloff/Nexus
®
• S (Small), L (Large)
• 100% Recyclable Aluminum
• Mountain Bike, Touring, Commuting
• $ 39.95
GP1 BioKork
Ergon’s GreenLab initiative is about combining the core principles of
ergonomics and performance with ecologically aware practices.
Introduced in 2010, the GreenLab initiative has played an
important role in the Ergon Development Department and the results
of that can be seen starting with the innovations in the last two years.
Ergon’s extensive grip assortment is now presented with completely
reworked and re-invented packaging. This uses as little material as
possible to achieve our aims, and much of the material used is recycled.
The sustainability of the packaging was a key factor, and that the
packaging can be recycled after use, and uses as few components as
possible, a priority – minimising the environmental impact. The result of
this new packaging quest is so innovative that it has already won the
coveted German DesignPlus packaging prize. Further examples are the
GP1 BioKork, GP3 BioKork and the GP5 BioKork grips. Once again, it
is Ergon setting the standards using the most innovative materials and
technology to achieve our aims.
FSHPO@PGGJDF@@
FSHPO@PGGJDF@@
Grip Surface
Improved feel thanks to
cork’s natural properties
Grip Rubber Compound
40% Cork from certified
sustainable forest
Grip Core
40% Biowert
®
grass fibre
Clamp
100% recyclable aluminum
424 000 16 GP1-L BioKork
424 001 16 GP1-L BioKork Gripshift
®
compatible
424 002 16 GP1-L BioKork Rohloff
®
/ Nexus
®
compatible
424 000 11 GP1-S BioKork
424 001 11 GP1-S BioKork Gripshift
®
compatible
424 002 11 GP1-S BioKork Rohloff
®
/ Nexus
®
compatible
6/2010 “Very good”
4/2010 “Very good”
2010
Endcap
40% Biowert
®

grass fibre
materialvision 2011
Packaging Material Innovation 09

25
WWW.ERGON-BIKE.COM
Performance Comfort
The GP3 BioKork offers a different feel thanks to the use of natural
cork, while offering all the ergonomic advantages of every Ergon
Performance Comfort Series grip. The 3 finger angle adjustable
bar end offers an additional hand position.
variants
Sizes
Barend
Use
mSRP
• Regular
• S (Small), L (Large)
• GF-Composite with rubber inserts
• Touring, Commuting
• $ 79.95
variants
Sizes
Barend
Use
mSRP
• Regular
• S (Small), L (Large)
• GF-Composite with rubber inserts
• Mountain Bike, Touring, Commuting
• $ 59.95
The GP5 BioKork offers all the ergonomic advantages of every
Ergon Performance Comfort Series grip – dissipating pressure and
optimizing the hand and wrist position, combined with the unique
feel of natural cork. The angle adjustable multi-hand position bar end
features rubberized inserts for a firm slip free hold.
424 000 26 GP3-L BioKork
424 000 21 GP3-S BioKork
424 000 76 GP5-L BioKork
424 000 71 GP5-S BioKork
GP3 BioKork

GP5 BioKork

Gripshift
®
• both grips are shortened
Rohloff
®
/nexus
®
• right grip is shortened
Regular shifters
• both grips are long
Adapted grips for different shifters.
Perfomance Comfort Series
• for regular shifters
• for Gripshift
®
• for Rohloff
®
/Nexus
®
Racing Series
• for regular shifters
Technical Series
• for regular shifters
26
WWW.ERGON-BIKE.COM
Technical
Blue
optimized Surface
1: Minimal thumb rub
2: Shaped mid zone
3: Rougher texture for increased grip
optimized Core
4: ‘Window’ in grip core for improved feel
5: Tuned and non-uniform wall thickness for improved damping
1 2 3
4 5
The choice of Ergon Factory Riders. One form, 5 colours. Increased damping
thanks to use of a new compound. Weight greatly reduced through use of a stable
composite clamp. Details: Inner core - Ergon Green (not visible when fitted).
Carbon bar compatible. All of this for just
$
24.95.
Sizes
Weight
Clamp
Use
mSRP
• One Size

ca. 115 g*
• FMC - Fiber Matrix Composite
• Mountain Bike, All Mountain
• $ 24.95
424 100 80 GA1 Evo
424 100 81 GA1 Evo White
424 100 82 GA1 Evo
Green
424 100 83 GA1 Evo Blue
424 100 84 GA1 Evo Red
1/2011: GA1 “Excellent”
(Test for previous model)
White RedBlack
Green
* Weight per pair, without end plugs.
GA1 Evo
27
WWW.ERGON-BIKE.COM
Holger meyer
Stefan Herrmann
Karen Eller
Tibor Simai
“Performance and style are the be all and end all.
The GA1 Evo ticks these boxes. Excellent grip and
absolutely bombproof on the bars. Arm pump is a thing
of the past, no matter how many runs I do.”
Richie Schley
“Ergon grips are simply better. The external clamp
communicates the precise location of the end of the
bars. The ergonomic shape and feel is superb. Try
them, find out yourself.”
Photographer: Blake Jorgenson
Photographer: Markus Greber
Photographer: Viktor Strasse
Downhill, Freeride, 4-Cross, Dirt, Enduro.
Ergon searches out some of the best riders in every discipline to assist with product development. Technical riding
experts, downhillers, 4-cross riders and mountain bike legends. Their feedback is extremely important and flows
into the products.
Timo Pritzel
“The more difficult the trick, the more important it is that
the grips give you total feedback. They communicate
the bike to you, and allow you to control it. Also, when
you bottom out the suspension (which you will!) the
ergonomic form of Ergon’s GA1 Evo dissipates the
shocks efficiently. Add to that the colors, and why
would you use anything else?”
Ergon Factory Rider “EFR”
28 WWW.ERGON-BIKE.COM
Racing
The HX1 is specially cut and designed to be close-fitting and
lightweight for cross-country and race applications. It matches
perfectly to the GS grip series. Thin padding for increased
trail feedback and thin breathable back of hand material make for
a comfortable yet unobtrusive glove. The silicon print is specially
designed to prevent the glove twisting in use.
Sizes
Palm material
Use
mSRP
• XS - XXL
• Micro-fibre Velour-leather
• Mountain Bike, Cross Country, Marathon
• $ 44.95
The HX2, like the HX1 is specially cut and designed to be close-fitting
and lightweight for cross-country and race applications matching
perfectly with the GS grip series. Thin padding for increased
trail feedback and thin breathable back of hand materials make for
a comfortable yet unobtrusive glove. The silicon print is specially
designed to prevent the glove twisting in use. Through the clever
placement of seams in the fingers, they cannot be felt when wearing
the glove.
460 003 10 HX1 X-Small
460 003 11 HX1 Small
460 003 12 HX1 Medium
460 003 13 HX1 Large
460 003 14 HX1 X-Large
460 003 15 HX1 XX-Large
Sizes
Palm material
Use
mSRP
• XS - XXL
• Micro-fibre Velour-leather
• Mountain Bike, Cross Country, Marathon
• $ 39.95
460 003 40 HX2 X-Small
460 003 41 HX2 Small
460 003 42 HX2 Medium
460 003 43 HX2 Large
460 003 44 HX2 X-Large
460 003 45 HX2 XX-Large
HX2
HX1
29
WWW.ERGON-BIKE.COM
Performance Comfort
The glove features flexible yet robust mesh material for ventilation of the back of the hand. The thinly
padded palm and fingers allows for increased feel and the benefits of Ergon grips not to be restricted. The
ball of the hand has a slight increase in cushioning material for better pressure relief of this sensitive area.
The glove features the same flexible yet robust mesh material as the HC1 for ventilation of the back of
the hand. The ball of the hand has a slight increase in cushioning material for better pressure relief of
this sensitive area. The fingers are slightly bent, even before the glove is put on, as on the bike the hand
is usually closed. Through the clever placement of seams, they cannot be felt when wearing the glove.
460 002 40 HC2 X-Small
460 002 41 HC2 Small
460 002 42 HC2 Medium
460 002 43 HC2 Large
460 002 44 HC2 X-Large
460 002 45 HC2 XX-Large
Sizes
Palm material
Use
mSRP
• XS - XXL
• Micro-fibre Velour-leather
• Touring, Leisure, Commuting
• $ 35.95
460 002 00 HC1 X-Small
460 002 01 HC1 Small
460 002 02 HC1 Medium
460 002 03 HC1 Large
460 002 04 HC1 X-Large
460 002 05 HC1 XX-Large
Sizes
Palm material
Use
mSRP
• XS - XXL
• Micro-fibre Velour-leather
• Touring, Leisure, Commuting
• $ 39.95
HC1
HC2
HP2
The thinly padded palm and fingers allows for increased feel and the benefits of Ergon grips not to
be restricted. The ball of the hand has a slight increase in cushioning material for better pressure
relief of this sensitive area. The fingers are slightly bent, even before the glove is put on, as on the
bike the hand is usually closed. Through the clever placement of seams, they cannot be felt when
wearing the glove. The glove also has towelling on the back for wiping away sweat.
460 002 51 HP2 Small
460 002 52 HP2 Medium
460 002 53 HP2 Large
460 002 54 HP2 Extra Large
460 002 55 HP2 Extra Extra Large
Sizes
Palm material
Use
mSRP
• S - XXL
• Microfibre, velour leather
• Touring, Leisure, Commuting
• $ 39.95
New HP2
HP2
30
WWW.ERGON-BIKE.COM
Technical
The award winning best selling HE2 is optimized for All Mountain and Enduro use,
and makes a perfect combination with Ergon’s Technical Series grips. Offering
protection and freedom of movement, the elasticated wrist band stablizes the wrist,
while a Kevlar insert protects the ball of the hand. Thin padding allows for maximum
feedback. Now available in brown and blue.
460 005 40 HE2 Extra Small
460 005 41 HE2 Small
460 005 42 HE2 Medium
460 005 43 HE2 Large
460 005 44 HE2 X-Large
460 005 45 HE2 XX-Large
Sizes
Palm material
Usage
mSRP
• XS - XXL
• Micro-fibre Velour-leather
• Enduro, Downhill, Freeride
• $ 39.95
460 005 50 HE2 Brown X-Small
460 005 51 HE2 Brown Small
460 005 52 HE2 Brown Medium
460 005 53 HE2 Brown Large
460 005 54 HE2 Brown X-Large
460 005 55 HE2 Brown XX-Large
460 005 60 HE2 Blue X-Small
460 005 61 HE2 Blue Small
460 005 62 HE2 Blue Medium
460 005 63 HE2 Blue Large
460 005 64 HE2 Blue X-Large
460 005 65 HE2 Blue XX-Large
Blue
BrownBlack
New HE2
460 005 71 HE2 Red Small nEW
460 005 72 HE2 Red Medium nEW
460 005 73 HE2 Red Large nEW
460 005 74 HE2 Red X-Large nEW
460 005 75 HE2 Red XX-Large nEW
Red
31
WWW.ERGON-BIKE.COM
460 004 71 HA2 Small nEW
460 004 72 HA2 Medium nEW
460 004 73 HA2 Large nEW
460 004 74 HA2 X-Large nEW
460 004 75 HA2 XX-Large nEW
Sizes
Palm material
Use
mSRP
• XS - XXL
• Micro-fibre Velour-leather
• Enduro, Downhill, Freeride
• $ 44.95
The Ergon HA2 is an all-mountain glove matching the Ergon grip series. The glove
offers a combination of protection and flexibility. A high quality integrated closure
makes for a crease and seam free cuff. A Kevlar insert offers additional protection for
the ball of the hand, while carefully positioned padding ensures the required feedback
is not lost. The glove has been updated for the 2013 season with the addition of
terry toweling, and a new colour option.
460 004 51 HA2 Green Small nEW
460 004 52 HA2 Green Medium nEW
460 004 53 HA2 Green Large nEW
460 004 54 HA2 Green X-Large nEW
460 004 55 HA2 Green XX-Large nEW
New HA2
Black
Green
Silhouette facelift 2012
Silhouette facelift 2012
HA2
Silhouette facelift 2012
Silhouette facelift 2012
HA2
Silhouette facelift 2012
Silhouette facelift 2012
HA2
32
WWW.ERGON-BIKE.COM
Technical
New BA3 SuperEnduro
Blue
Compact Mountain Bike backpack for All Mountain use. 4 stage adjustable back length, load
compression ‘Adaptive Carrier System’ adjusts to the shape of the rider. The BA3 offers 15 litres
of capacity, with a extra 2 litre expansion. Vertical compartments for protectors, combined full face
helmet / wet clothing compartment. Compression straps. Inside the pack has 4 compartments, and
a separate pocket for a bladder. The front section and hip strap has small pockets to keep tools,
tubes, and a pump oraganized. A loop on the shoulder straps allows a phone holder to be fitted.
The wide, elastic hip strap can be adjusted with a single hand, and has both velcro and standard
fastenings to ensure the pack stays put when riding. For increased visibility HiLumen reflectors have
been integrated.
Shoulder Straps
volume
material
Load Capacity
mSRP
• Sizes: Small oder Large
• ca. 15 + 2 Liters
• Nylon, Neopren, Polyester
• Recommended up to 8 kg
• tba

450 002 50 BA3 SuperEnduro Small
450 002 55 BA3 SuperEnduro Small Blue
450 002 51 BA3 SuperEnduro Large
450 002 56 BA3 SuperEnduro Large Blue
Body height
Size T-shirt (US)
Backpack size*
up to 175 cm / 5‘9‘‘
XS-S
Small
above 175 cm / 5‘9‘‘
S-XL
Large
* Recommendations are based on average people.
Size guide*
33
WWW.ERGON-BIKE.COM
MTB Racing
Grey / Green
Ergon's mid sized Mountain Bike pack. The innovative 'Adaptive Carrier
System' holds the load close to the body, and stable. Self correcting
shoulder straps available in Small and Large sizes. 4 position back
adjustment allows every rider to find the perfect fit and comfort. The
pack has a capacity of 10 litres (expandable to 11.5 litres using the
zippered expansion facility) and features a main compartments, bladder
compartment, rain cover, hip belt pockets and organization
compartments.
BX2
Shoulder Straps
volume
material
Load Capacity
mSRP
• Size: Small oder Large
• 10 + 1,5 Liters
• Nylon, Polyester
• Recommended up to 6 kg
• $ 89.95

450 002 20 BX2 Small (Version 2012)
450 002 25 BX2 Small Grey / Green (Version 2012)
450 002 21 BX2 Large (Version 2012)
450 002 26 BX2 Large Grey / Green (Version 2012)
BX1
Extra lightweight Mountain Bike pack. Innovative 'Adaptive Carrier
System' based load compression - the load is kept close to the user
and stable. Self correcting shoulder straps available in Small and
Large sizes**, Super light, rip-stop nylon, water resistant zippers.
The sports backpack has a 7 litre capacity, a front compartment and
a further organization compartment.
Shoulder Straps
volume
material
Load Capacity
mSRP
• Sizes: Small or Large
• ca. 7 Liters
• Nylon, Polyester
• Recommended up to 4 kg
• $ 79.95

450 002 10 BX1 Small
450 002 15 BX1 Small Grey / Green
450 002 11 BX1 Large
450 002 16 BX1 Large Grey / Green
Grey / Green
7/2011: BX2 “Very Good”
(Test for previous model)
* Recommendations are based on average people.
Size guide*
Size guide*
Body height
Size T-shirt (US)
Backpack size
up to 175 cm / 5‘9‘‘
XS-S
Small
above 175 cm / 5‘9‘‘
S-XL
Large
Body height
Size T-shirt (US)
Backpack size
up to 175 cm / 5‘9‘‘
XS-S
Small
above 175 cm / 5‘9‘‘
S-XL
Large
34 WWW.ERGON-BIKE.COM
MTB Racing
BX3
* Recommendations are based on average people.
Green / Grey
Rider focused: Bladder hose
routing on the left or right.
Adjustable: Self-correcting, free moving
shoulder straps find the correct angle
automatically regardless of body.
Tailored fit: 4 position back length
adjustment - simply done with a
few hand movements.
4 zone climate control: Optimized
air-circulation and load distribution
thanks to large open mesh SpacerFabric
back pads.
Controlled in every manoeuver. Self correcting 'Adaptive Carrier System'
utilizes a trapeze support. The lower part of the backpack can be pulled
closer to the body using the shoulder straps.
Everything is to hand: Easy to get at
pockets for tools, and energy bars.
Mid Sized Mountain Bike Pack. Using the innovative 'Adaptive Carrier System' the load is
compressed and kept close to the body and stable. The self adjusting system is available in two
sizes, small and large and the 4 position back length adjustment ensures every rider can find the
perfect fit. The pack can be expanded from 14, to 16.5 litres using the zippered expansion facility
and features main compartment, bladder compartment, rain cover, helmet retainer, front and side
pockets, and organization compartments. The volume and functional compartment mix make this an
ideal pack for long days in the saddle, or even the daily commute. For added visibility the pack has
HiLumen reflectors.
Shoulder Straps
volume
material
Load Capacity
mSRP
• Sizes: Small oder Large
• 16 + 3 Liters
• Nylon, Polyester
• Recommended up to 9 kg
• $ 99,95

450 002 30 BX3 Small
450 002 35 BX3 Small Green / Grey
450 002 31 BX3 Large
450 002 36 BX3 Large Green / Grey
Size guide*
Body height
Size T-shirt (US)
Backpack size
up to 175 cm / 5‘9‘‘
XS-S
Small
above 175 cm / 5‘9‘‘
S-XL
Large
35
WWW.ERGON-BIKE.COM
MTB Racing
New BX4
Body height
Size T-shirt (US)
Backpack size
up to 175 cm / 5‘9‘‘
XS-S
Small
above 175 cm / 5‘9‘‘
S-XL
Large
Size guide*
Large backpack for epic riding and weekends on the bike. 4 stage adjustable back length, load
compression ‘Adaptive Carrier System’ with mouldable aluminium ribs for form following shape.
The BX4 boasts a 27 litre + 3 litre volume, 4 compartments and a completely separate bladder
compartment. The front section and hip strap has small pockets to keep tools, tubes, and a pump
oraganized. A loop on the shoulder straps allows a Topeak iPhone Drybag to be fitted, while a large
external helmet / wet clothes compartment allows sensible storage. The wide, elastic hip strap can
be adjusted with a single hand. For increased visablity HiLumen reflectors have been integrated.
Shoulder Straps
volume
material
Load Capacity
mSRP
• Sizes: Small or Large
• 27 + 3 Liters
• Nylon, Polyester
• Recommended up to 11 kg
• tba

450 002 40 BX4 Small
450 002 41 BX4 Large
* Recommendations are based on average people.
WWW.ERGON-BIKE.COM
Ergon
®
is a worldwide trademark, Ergon
®
product and packaging designs are worldwide patent pending. GripShift
®
are registered trademarks of Sram
®
Inc, Shimano
®
, Nexus
®
, SPD
®
are registered trademaks of Shimano
®
Inc, Rohloff
®

is a registered trademark of Rohloff AG, Kéo
®
is a registrated Trademark of LOOK
®
Cycle International, crankbrothers
®
is a registrated trademark of crankbrothers
®
Inc., Monolink
®
is a Trademark of Selle Italia
®
. VCLS is a registered
trademark of Canyon Bicycles. Ergon reserves the rights to change the specifications without notice. Prices, weights and product descriptions are for guide only.
Catalogue accurate at time of going to press. All products are subject to change.
2012: CF3 Pro Carbon
2011: SM3 Pro Carbon
Monolink
®
2010: PC2
2008: TP1
2006: GX1 / GX2
2005: GP3
2011: PC2
2010: GP1 Biokork
2009: GP5
2005: GP3
2004: GP1
2010: GP5
2010: GP1 Biokork
1/2011: GX1 - Test Winner

Excellent

1/2011: GA1 “
Excellent

2/2007: GP1 - Best Buy

Excellent

3/2009: GP5
2/2008: GP1
2/2008: GP2
Design-Awards
Tests
5/2012: HE2 “Very good”
7/2011: BX2 “Very good”
(Test for previous model)
Ergon Racing Teams
8/2011: BC3 “Good”
Ergon International:
RTI Sports GmbH
Universitaetsstr. 2, 56070 Koblenz/Germany
T +49 (0) 261 899998-28, F +49 (0) 261 899998-19
www.ergon-bike.com
www.rtisports.de
Ergon USA, Inc.
8285 Sunset Blvd.
Suite #12
West Hollywood, CA. 90046
T 323-656-2788, T 877-573-7466 (Toll Free)
F 323-848-9097
www.ergon-bike.com
2006-2010: GP1
12/2010: GP1 BioKork
materialvision 2011
2011: PC2