Connect to Eagle Server

screechingagendaNetworking and Communications

Oct 26, 2013 (3 years and 7 months ago)

70 views

Task: Connect to Eagle Server

and download packet tracer in VM


Physical Connection:

1.

Disconnect PC from internet connection

2.

Connect
the Ethernet connection on the
PC to
a socket KP202/
--

on the
wall using another blue/grey cable

3.

Identify the switch to which Eagle Server is connected and patch the
cable at the appropriate socket on the patch panel (pick up same
number
on the patch panel as the one on the wall).

Logical Connection

1.

Eagle server has an IP address of: 192.168.254.254
,

subnet mask: 255.255.255.0

2.

Change the IP address on the PC

using:

3.

My network places
-
>right click
-
>properties
-
>local area connection
-
>
properties
-
> click TCP/IP
-
>enter IP address and subnet mask

4.

Enter IP address: 192.168.254.xx (xx varies from 1
-

20 )

(Use xx=1
,

starting from PC next to equipment rack)

5.

Run ping: c:
\
>ping 192.168.254.254

6.

If ping does not work then troubleshoot issues
-

> cabling, IP address etc.

7.

Start a VM relevant to your practical group. 1017
-
01/1017
-
02 ...

8.

Open a browser and type the URL:
ftp://192.168.254.254

9.

It should bring up ‘pub ‘ folder
-
>click> Eagle 1
-
>click
-
>chapter 1
-
>

download packet tracer 5.3

10.


Save it in a new folder ‘downloads’

11.


Install packet tracer






Task: Draw topology of the network you have set up with Eagle server



1.

Once packet tracer is downloaded and ins
talled, connect the PC back to
I
nternet connection and restore the IP address settings.

Q.
How would you test the connection is restored?