SmartPlant Enterprise Content

rebelhammerSoftware and s/w Development

Nov 2, 2013 (3 years and 7 months ago)

117 views


SmartPlant Enterprise Content

What’s New for
July

201
1





July

201
1














Copyright

Copyright © 2010

Intergraph Corporation. All Rights Reserved.

Including software, file formats, and audiovisual displays; may be used pursuant to applicable
software license agreement; contains
confidential and proprietary information of Intergraph and/or third parties which is protected by copyright law, trade secret

law, and
international treaty, and may not be provided or otherwise made available without pr
oper authorization from Intergraph Corporation.

Portions of this software are owned by Spatial Corp. © 1986
-
2010. All Rights Reserved.

U.S. Government Restricted Rights Legend

Use, duplication, or disclosure by the government is subject to restrictions as
set forth below. For civilian agencies: This was developed at
private expense and is "restricted computer software" submitted with restricted rights in accordance with subparagraphs (a) t
hrough (d) of
the Commercial Computer Software
-

Restricted Rights cl
ause at 52.227
-
19 of the Federal Acquisition Regulations ("FAR") and its successors,
and is unpublished and all rights are reserved under the copyright laws of the United States. For units of the Department of
Defense
("DoD"): This is "commercial computer
software" as defined at DFARS 252.227
-
7014 and the rights of the Government are as specified at
DFARS 227.7202
-
3.

Unpublished
-

rights reserved under the copyright laws of the United States.

Intergraph Corporation

P.O. Box 240000

Huntsville, AL 35813

Stree
t address: 170 Graphics Drive, Madison, AL 35758

Terms of Use

Use of this software product is subject to the End User License Agreement ("EULA") delivered with this software product unles
s the licensee
has a valid signed license for this software product w
ith Intergraph Corporation. If the licensee has a valid signed license for this software
product with Intergraph Corporation, the valid signed license shall take precedence and govern the use of this software produ
ct. Subject to
the terms contained within
the applicable license agreement, Intergraph Corporation gives licensee permission to print a reasonable
number of copies of the documentation as defined in the applicable license agreement and delivered with the software product
for
licensee's internal, n
on
-
commercial use. The documentation may not be printed for resale or redistribution.

Warranties and Liabilities

All warranties given by Intergraph Corporation about equipment or software are set forth in the EULA provided with the softwa
re or
applicable l
icense for the software product signed by Intergraph Corporation, and nothing stated in, or implied by, this document or its
contents shall be considered or deemed a modification or amendment of such warranties. Intergraph believes the information in

this
publication is accurate as of its publication date.

The information and the software discussed in this document are subject to change without notice and are subject to applicabl
e technical
product descriptions. Intergraph Corporation is not responsible fo
r any error that may appear in this document.

The software discussed in this document is furnished under a license and may be used or copied only in accordance with the te
rms of this
license. No responsibility is assumed by Intergraph for the use or relia
bility of software on equipment that is not supplied by Intergraph or
its affiliated companies. THE USER OF THE SOFTWARE IS EXPECTED TO MAKE THE FINAL EVALUATION AS TO THE USEFULNESS OF THE
SOFTWARE IN HIS OWN ENVIRONMENT.

Intergraph is not responsible for the accuracy of delivered data including, but not limited to, catalog, reference and symbol

data. Users
should verify for themselves that the data is accurate and suitable for their project work.

Trademarks

Intergraph, th
e Intergraph logo, PDS, SmartPlant, FrameWorks, I
-
Convert, I
-
Export, I
-
Sketch, SmartMarine, IntelliShip, INtools, ISOGEN,
MARIAN, SmartSketch, SPOOLGEN, SupportManager, and SupportModeler are trademarks or registered trademarks of Intergraph
Corporation or

its subsidiaries in the United States and other countries. Microsoft and Windows are registered trademarks of Microsoft
Corporation. ACIS is a registered trademark of SPATIAL TECHNOLOGY, INC. Infragistics, Presentation Layer Framework, ActiveTre
eView Ctrl
,
ProtoViewCtl, ActiveThreed Ctrl, ActiveListBar Ctrl, ActiveSplitter, ActiveToolbars Ctrl,

ActiveToolbars Plus Ctrl, and

ProtoView are
trademarks of Infragistics, Inc. Incorporates portions of 2D DCM, 3D DCM, and HLM by Siemens Product Lifecycle Managemen
t Software III
(GB) Ltd. All rights reserved.

Gigasoft is a registered trademark, and ProEssentials a trademark of Gigasoft, Inc. VideoSoft

and VXFlexGrid

are
either registered trademarks or trademarks of ComponentOne LLC 1991
-
2009, All rights reserved. Or
acle, JD Edwards, PeopleSoft, and
Retek are registered trademarks of Oracle Corporation and/or its affiliates. Tribon is a trademark of AVEVA Group plc. Other
brands and
product names are trademarks of their respective owners.




SmartPlant Enterprise Content

What’s New for July 2011

5


Contents


July 2011 Overview

................................
................................
................................
...........................
6

Structure

................................
................................
................................
................................
.........

18

Layout

................................
................................
................................
................................
.............

19

Civil

................................
................................
................................
................................
.................

21

Piping Fittings and Valves

................................
................................
................................
..............

27

Marine HVAC Fittings

................................
................................
................................
......................

22






July 2011 Overview



6

SmartPlant

Enterprise Content

What’s
New

for July 2011




Structure

o

Enhance
d

the spiral stairs for spherical equipment prototype symbol
to

address

additional
requirements.



July

2011 Overview


July 2011 Overview



SmartPlant Enterprise Content

What’s New for July 2011

7




Layout

o

Provide
d

a new best
practice

pump set assembly, which includes
more detailed
piping than

the existing pump set assembly
:

(ron> You should circle what has
been added)





July 2011 Overview



8

Smar
tPlant

Enterprise Content

What’s New

for July 2011




July 2011 Overview



SmartPlant Enterprise Content

What’s New for July 2011

9




Civil

o

Enhanced the Pull Pit symbol to

addresses
parametric port
requirements

for
sloped cable trays
.








Marine HVAC Fittings


based on the Spiral and Lindab catalog

o

Enhanced the best practice reducing lo loss tee symbol
based on

the Spiral
catalog.

July 2011 Overview



10

SmartPlant

Enterprise Content

What’s New

for July 2011




July 2011 Overview



SmartPlant Enterprise Content

What’s New for July 2011

11


o

Enhanced the best practice reducing lateral symbol
based on the

Spiral catalog.


o

Enhanced the best practice reducing tee symbol
based on

the Spiral catalog.



o

Enhanced the best practice saddle lateral tap symbol
based on

the Lindab
catalog.

July 2011 Overview



12

SmartPlant

Enterprise Content

What’s New

for July 2011





July 2011 Overview



SmartPlant Enterprise Content

What’s New

for July 2011

13


o

Enhanced the best practice taper body lateral symbol
based on

the Lindab
catalog.


o

Enhanc
ed the best practice tee symbol
based on

the Spiral catalog and Lindab
catalog.



o

Enhanced the best practice contour flanged tap symbol
based on

the Lindab
catalog.

July 2011 Overview



14

SmartPlant

Enterprise Content

What’s New

for July 2011




July 2011 Overview



Sma
rtPlant Enterprise Content

What’s New for July 2011

15




Piping Fittings

and Valves

o

Provided a best practice steam distribution valve manifold
symbol
based on

the
Spirax Sarco catalog



o

Provided a best practice Con
d
ensate Chamber and Seal Chamber symbol based
on the
Pioneer Enterprise catalog and
the Channel
-
Track catalog


o

Enhanced the best practice instrument manifold symbol
based on the
Swagelok
VL Series 2
-
valve instrument manifold

July 2011 Overview



16

SmartPlant

Enterprise Content

What’s New

for July 2011



o

Enhanced the best practice coupling symbol to provide options for the LOKRING®
piping coupling and the LOKRING® tubing coupling

o

Enhanced the best practice check valve symbol to provide options for jacketed
s
wing check valves based on the Coyard catalog and the Kitz catalog


o

Enhanced the best practice handwheel symbol to provide options for jacketed
swing check valves based on the Coyard catalog and the Kitz catalog

o

Provided a best practice oval handle valv
e operator symbol based on the
Swagelok 60 Series process ball valve handle options in MS
-
01
-
137


July 2011 Overview



SmartPlant Enterprise Content

What’s New for July 2011

17





Structure



18

SmartPlant

Enterprise Content

What’s New

for July 2011





Spiral Stair

around Spherical
Vessel



Enhance
d

the spiral stairs for spherical equipment prototype symbol
to

address

the
following requirements.



Provide the means to control the landing height from the base of the spherical
vessel.



Provide an option to create handrails on both sides. Presently, handrails are not
created on the inner side of the rails.



Conten
t
Location: Download the “
Structure 2009
-
2009.1.zip
” zip file and browse to the folder
hierarchy

‘Structure
\
Stairs
\

Spiral Stair around Spherical Vessel



Structure


Layout



SmartPlant Enterprise Content

What’s New for July 2011

19



Pump Set, Detailed


Provide
d

a new best practice pump set assembly, which includes the functionality of the existing
pump set assembly plus the following additional functionality:


1) Add new datum points at a) the corner of the base of pump A, and b) the opposite corner of
the base
of pump B.


2) Allow the user to specify the part numbers for the pumps, so that the sizes of the suction and
discharge nozzles can be controlled.


It is acceptable to base the symbol on a particular part class, since this is just a generic
representation
of a pair of centrifugal pumps. However, it must be possible to define multiple
part numbers under this part class and then specify which part number is to be used as a
definition property of the pump set assembly itself.


3) Options should be provided to
include the following valves and fittings.

a) The suction line should optionally include an isolation valve with a user specified type, e.g. ball
valve.

b) The discharge line should optionally include an isolation valve and a check valve, with a user
spec
ified type. The check valve must be oriented correctly.

c) The open ends of the pipe runs should optionally include a flange.

Layout

Layout



20

SmartPlant

Enterprise Content

What’s New

for July 2011



Content Location: Download the “Layout

2009
-
2009.1.zip
” zip file and browse to the folder
hierarchy

Layout/Equipment and
Assemblies/Pump Set, Detailed



Civil



SmartPlant Enterprise Content

What’s New for July 2011

21



Pull Pit


Enhanced t
he best practice Pull Pit symbol
to

addresses the following requirements

for
sloped cable trays
.




The cableway ports should be located parametrically with independent dimensions.



It should be
possible to modify the location of each cableway port independently.



It should be possible to route sloped duct bank from each cableway port.


Content Location: Download the “Civil

2009
-
2009.1.zip
” zip file and browse to the folder
hierarchy

Civil/Equipmen
t/Manholes/Pull pit

Civil

Marine HVAC Fittings



22

SmartPlant

Enterprise Content

What’s New

for July 2011



Reducing Lo Loss Tee



Enhance
d

the best practice reducing lo loss tee symbol to provide
the follo
w
ing

option on the
basis of part number AFT
-
1
-
R in the Spiral catalog.



Lo Loss Tee, Reducing ,Type B

Content Location: Download the “HVAC

2009
-
2009.1.zip
” zip file and browse to the folder
hierarchy

HVAC/Branch Fittings/Reducing Run tees/Reducing Lo Loss Tee

Reducing Straight and Conical Lateral



Enhance
d

the best practice reducing lateral symbol to provide
the following

option on the basis
of model number O
-
L
-
1
-
R in the Spiral catalog.




Reducing Lateral, Straight Branch,Type 2

Content Location: Download the “HV
AC

2009
-
2009.1.zip
” zip file and browse to the folder
hierarchy

HVAC/Branch Fittings/Reducing Run Lateral/Reducing Straight and Conical Lateral


Reducing Tee



Marine HVAC Fittings


Marine HVAC Fittings



SmartPlant Enterprise Content

What’s New for July 2011

23


Enhance
d

the best practice reducing tee symbol to provide
the following

option
s

on the basis of

model numbers T
-
1
-
R and T
-
1
-
C
-
R in the Spiral catalog.



Reducing Tee, Straight Branch,Type B



Reducing Tee, Conical Branch,Type B

Content Location:
Download the “HVAC

2009
-
2009.1.zip
” zip file and browse to the
folder
hierarchy

HVAC/Branch Fittings/Reducing Run tees/Reducing Tee



Marine HVAC Fittings



24

SmartPlant

Enterprise Content

What’s New

for Jul
y 2011


Saddle Straight and Conical Lateral Tap



Enhance
d

the best practice saddle lateral tap symbol to provide
the following

options on the
basis of Page 5 of
the Spiral catalog and part
number PSVTR 30° in the Lindab catalog.



Saddle Lateral Tap, Straight, Type C



Saddle Lateral Tap, Straight, Type D

Content Location: Download
the “HVAC

2009
-
2009.1.zip
” zip file and browse to the folder
hierarchy

HVAC/Surface Mounted/Saddle Straight and Conical Lateral Tap

Tapered Body Lateral



Enhance
d

the best practice taper body lateral symbol to provide
the following

options on the
basis of part number Standard L
-
1
-
R in the Spiral catalog and model number
TVTR 30° in the
Lindab catalog.



Lateral, taper body, Type D



Lateral, taper body, Type E

Content Location: Download the “
HVAC

2009
-
2009.1.zip
” zip file and
browse to the folder
hierarchy

HVAC/Branch Fittings/Reduci
ng Run Lateral/Tapered Body Lateral


Tee


Enhance
d

the best practice tee symbol to provide
the following

options on the basis of model
number T
-
1
-
C in the Spiral catalog and model number TU in the Lindab catalog.



Tee, Conical Branch, Type C


Marine HVAC Fittings



SmartPlant Enterprise Content

What’s New for July 2011

25




Tee, Conical Branch, Type D

Content Location: Download

the “HVAC

2009
-
2009.1.zip
” zip file and browse to the folder
hierarchy

HVAC/Branch Fittings/Tees/Tee



Marine HVAC Fittings



26

Sma
rtPlant

Enterprise Content

What’s New

for July 2011


Contoured Flanged Straight and Conical Tee Tap



Enhance
d

the best practice contour flanged tap symbol to provide
the following

option on the
basis of model number TSTU in the Lindab catalog.



Contoured Flanged Tee Tap, Straight , Type B

Content Location: Download the


HVAC

2009
-
2009.1.zip
” zip file
and browse to the folder
hierarchy

HVAC/Surface Mounted/Contoured Flanged Straight and Conical Tee Tap



Piping Fittings and Valves



SmartPlant Enterprise Content

What’s New for July 2011

27



Steam Distribution Manifolds


Provide
d
a best practice steam distribution valve manifold

symbol to provide
the following

options for the MSC04, MSC08, and MSC12 model numbers in the Spirax Sarco catalog




Steam distribution manifold, 4 valves, Type 1



Steam distribution manifold, 8 valves, Type 1



Steam
distribution manifold, 12 valves, Type 1


Content Location: Download the “Piping

2009
-
2009.1.zip
” zip file and browse to the folder
hierarchy

Piping/Valves/Valve manifolds/Steam distribution manifolds



Condensate and Seal Chambers


Provide
d

a best practice Con
d
ensate Chamber and Seal Chamber symbol with
the following

options based

on the
Pioneer Enterprise catalog and
the Channel
-
Track catalog





Condensate/seal chamber, Type 2

Piping Fittings

and Valves


Piping Fittings and Valves



28

SmartPlant

Enterprise Content

What’s New

for July 2011




Condensate/seal
chamber, Type 6


Content Location: Download the “Piping

2009
-
2009.1.zip
” zip file and browse to the folder
hierarchy

Piping/Other specialty components/Steam traps (or Condensate traps)/Condensate and Seal
Chambers


Instrument Manifold


Enhance
d

the best practice instrument manifold symbol to provide
the following

option for the
Swagelok VL Series 2
-
valve instrument manifold




Instrument manifold, 2 valves, Type 2


Content Location: Download the “Piping

2009
-
2009.1.zip
” zip file and browse to the folder
hierarchy

Piping/Valves/Other instrument valves/Instrument Manifolds




Piping Fittings and Valves



SmartPlant Enterprise Content

Wh
at’s New for July 2011

29



Coupling


Enhance
d

the best practice coupling symbol to provide
the following

options for the LOKRING®
piping coupling and the
LOKRING® tubing coupling




Coupling, mechanical x mechanical, Type 1



Coupling, mechanical x mechanical, Type 2


Updated t
he sample data for the LOKRING® piping coupling
to
include the Resistoflex Conquest®
pipe and
Resistoflex Multi
-
Axis® pipe

data
.


Content Location: Download the “Piping

2009
-
2009.1.zip
” zip file and browse to the folder
hierarchy

Piping/In
-
Line Fittings/Couplings and connectors/Coupling



Check Valve


Enhance
d

the best practice check valve symbol to provide
the following

options for jacketed
swing check valves based on the Coyard catalog and the Kitz catalog




Check valve, jacketed, Type 1.



Check valve, jacketed, Type 2


Piping Fittings and Valves



30

SmartPlant

Enterprise Content

What’s New

for July 2011


Content Location: Download the “Piping

2009
-
2009.1.zip
” zip file and browse to the folder
hierarchy

Piping/Valves/Linear valves flow directional/Check Valve



Hand
w
heel
Operator


Enhance
d

the best practice
handwheel
valve operator
symbol to provide
the

following

options
for jacketed swing check valves based on the Coyard catalog and the Kitz catalog




Handwheel, Type 21


Content Location: Download the “Piping

2009
-
2009.1.zip
” zip file and browse to the folder
hierarchy

Piping/Valves/Manual Operators/Handwheel



Piping Fittings and Valves



SmartPlant Enterprise Content

What’s New for July 2011

31



Oval handle


Provide
d

a best practice oval handle valve operator symbol based on the Swagelok 60 Series
process ball valve handle option

in MS
-
01
-
137

The following option

ha
s

been provided:




Oval h
andle, Type 1


Content Location: Download the “Piping

2009
-
2009.1.zip
” zip file and browse to the folder
hierarchy

Piping/Valves/Manual Operators/Oval Handle




Provide
d
more robust sample data for the Straub coupling symbol
, as listed below
.



Straub® Straub
-
Grip
-
L Coupling, IPS



Straub® Straub
-
Grip
-
L Coupling,CTS



Straub® Straub
-
Metal
-
Grip
-
L Coupling, IPS



Straub® Straub
-
Metal
-
Grip
-
L Coupling, DIPS



Straub® Straub
-
Flex and Straub
-
Open
-
Flex Coupling, IPS



Straub®

Straub
-
Flex and Straub
-
Open
-
Flex Coupling, DIPS



Straub® Straub
-
Flex and Straub
-
Open
-
Flex Coupling, CTS

Content Location: Download the “Piping

2009
-
2009.1.zip
” zip file and browse to the folder
hierarchy

Piping/Sample Data/Sample Data for Straub Coupling.x
ls


Piping Fittings and Valves



32

SmartPlant

Enterprise Content

What’s New

for July 2011