CHAPTER 23
SEISMIC DESIGN REFERENCE DOCUMENTS
23.1
CONSENSUS STANDARDS AND OTHER REFERENCE DOCUMENTS
This section lists the reference documents that are referenced in Chapters 11 through 22. The reference documents are
listed herein by the promulgating
agency of the reference document
;
the reference document
identification; the section(s)
and tables of ASCE 7 that cite the reference document
;
the title
;
and
the
effective date. Unless identified by an asterisk,
the following reference documents are consen
sus standards and are to be considered part of this standard to the extent
referenced in the specified section. Those reference documents identified by an asterisk (*) are documents developed
within the industry and represent acceptable procedures for desi
gn and construction to the extent referred to in the
specified section.
AAMA
American Architectural Manufacturers Association
1827 Waldon Office Square
Suite 104
Schaumburg, IL 60173
*AAMA 501.6
Section 13.5.9.2
Recommended Dynamic Test Method for Determin
ing the Seismic Drift Causing Glass Fallout from a Wall System,
2001
ACI
American Concrete Institute
P.O. Box 9094
Farmington Hills, MI 48333
-
9094
ACI 307
Sections 15.4.1, 15.6.2, Table 15.4
-
2
Code Requirements for Reinforced Concrete
Chimneys
and
Commentary,
2008
ACI 313
Sections 15.7.9.3.3, 15.7.9.6, 15.7.9.7
Standard Practice for the Design and Construction of Concrete Silos and Stacking Tubes for Storing Granular Materials
,
1997
ACI 318
Sections 11.2, 12.12.5, 12.13.6, 13.4.2.1, 13.4.4,
13.5.7.2, 14.2.1, 14.2.2, 14.2.2.1, 14.2.2.2, 14.2.2.3, 14.2.2.4, 14.2.2.5,
14.2.2.6, 14.2.2.7, 14.2.3, 14.2.3.1.1, 14.2.3.2.1, 14.2.3.2.2, 14.2.3.2.3, 14.2.3.2.5, 14.2.3.2.6, 14.3.1, 14.3.2, 14.4.4.2.
2,
14.4.5.2, 15.4.9.1, 15.6.2, 15.7.5, 15.7.11.7, 11A.2
.1.2, 11A.2.1.3, 11A
.
2.2, Table 12.2
-
1, Table 15.4
-
1
Building Code Requirements for Structural Concrete and Commentary,
2011
ACI 350.3
Sections 15.7.6.1.1, 15.7.7.3
Standard Practice for the Seismic Design of Liquid
-
Containing Concrete Structures
, 2006
ACI
355.2
Sections 13.4.2.3, 13.6.5.5, 15.4.9.3
Qualification of Post
-
Installed Mechanical Anchors in Concrete and Commentary
, 2007
*ACI 371R
Section 15.7.10.7
Guide to the Analysis, Design, and Construction of Concrete
-
Pedestal Water Towers
, 1998
ACI 530
/ASC
E 5/TMS 402
Sections 13.4.2.2, 14.4.1, 14.4.2, 14.4.3, 14.4.3.1, 14.4.4, 14.4.4.1, 14.4.4.2.2, 14.4.5, 14.4.5.1,
14.4.5.2,
14.4.5.3,
14.4.5.4, 14.4.5.5, 14.4.5.6, 14.4.6, 14.4.6.1
,
15.4.9.2, 11A.2.3
Building Code Requirements for Masonry Str
uctures,
2011
ACI 530.1
/ASCE 6/TMS 602
Sections 14.4.1, 14.4.2, 14.4.7, 14.4.7.1, 11A.2.3
Specification for Masonry Structures
, 2011
AISC
American Institute of Steel Construction
One East Wacker Drive
Suite 700
Chicago, IL 60601
-
2001
ANSI/AISC 341
Sections
14.1.1, 14.1.2.2.1, 14.1.2.2.2, 14.1.7, 14.3.1, 14.3.3, 11A
.
1.3.6, 11A.2.4, Table 15.4
-
1
Seismic Provisions for Structural Steel Buildings,
2010
ANSI/AISC 360
Sections 14.1.1, 14.1.2.1, 14.1.2.2.1, 14.3.1, 14.3.2, Table 15.4
-
1
Specification for Structural
Steel Buildings
, 2010
AISI
American Iron and Steel Institute
1140 Connecticut Avenue
, NW
Suite 705
Washington, DC 20036
ANSI/AISI S100 W/S2
D
10
Sections 14.1.1, 14.1.31, 14.1.3.2, 14.1.4.1, 14.1.5
North American Specification for the Design of Cold
-
Formed
Steel Structural Members,
2007, with Supplement 2, 2010
ANSI/AISI S110 W/S1
D
09
Sections 14.1.1, 14.1.3.2, Table 12.2
-
1
Standard for Seismic Design of Cold
-
Formed Steel Structural Systems
—
Special Bolted Moment Frames
, 2007, with
Supplement 1, 2009
ANSI/AISI S213 with S1
-
09
Sections 12.14.7.2, 14.1.1, 14.1.4.2
North American Standard for Cold
-
Formed Steel Framing
—
Lateral Design,
2007, with Supplement 1, 2009
ANSI/AISI S230 with S2
-
08
Sections 14.1.1,
14.1.4.3
Standard for Cold
-
Formed Steel Framing
—
Pr
escriptive Method for One
-
and Two
-
Family Dwellings
, 2007, with
Supplement 2, 2008
API
American Petroleum Institute
1220 L Street
, NW
Washington, DC 20005
-
4070
API 12B
Section 15.7.8.2
Specification for Bolted Tanks for Storage of Production Liquids
,
12B,
15
th
edition, 2009
API 620
Sections 15.4.1, 15.7.8.1, 15.7.13.1
Design and Construction of Large, Welded, Low Pressure Storage Tanks
, 11
th
edition, Addendum 2, 2010
API 650
Sections 15.4.1, 15.7.8.1, 15.7.9.4
Welded Steel Tanks for Oil Storage
, 11
th
edition, Addendum 3, 2011
API 653
Section 15.7.6.1.9
Tank Inspection, Repair, Alteration, and Reconstruction
, 4
th
edition, Addendum 1, 2010
ASCE/SEI
American Society of Civil Engineers
Structural Engineering Institute
1801 Alexander Bell Drive
Reston, V
A 20191
-
4400
ASCE 4
-
98
Section 12.9.3
Seismic Analysis of Safety
-
Related Nuclear Structures,
2000
ASCE 8
Sections 14.1.1, 14.1.3.1, 14.1.3.2, 14.1.5
Specification for the Design of Cold
-
Formed Stainless Steel Structural Members
, 2002
ASCE
/SEI
19
Sections 14.1.1, 14.1.6
Structural Applications for Steel Cables for Buildings
, 2010
ASME
American Society of Mechanical Engineers
Three Park Avenue
New York, NY 10016
-
5900
ASME A17.1
Sections 13.6.10, 13.6.10.3
Safety Code for Elevators and Escalators
, 20
07
ASME B31 (consists of the following listed standards)
Sections 13.6.5.1, 13.6.8.1
Table 13.6
-
1
Power Piping
, ASME B31.1, 2001
Process Piping
, ASME B31.3, 2002
Transportation Systems for Liquid Hydrocarbons and Other Liquids, Pipeline
, ASME B31.4, 2002
R
efrigeration Piping and Heat Transfer Components
, ASME B31.5, 2010
Gas Transmission and Distribution Piping Systems
,
ASME B31.8
,
2010
Building Services Piping,
ASME B31.9, 2008
Slurry Transportation Piping Systems
, ASME B31.11, 2002
Hydrogen Piping and
Pipelines
, ASME B31.12, 2008
Standard for the Seismic Design and Retrofit of Above
-
Ground Piping Systems
,
Addenda A,
ASME B31E
A
-
2010
, 2010
ASME BPVC
-
01
Sections 13.6.9, 13.6.11, 15.7.11.2, 15.7.11.6, 15.7.12.2
Rules for Construction of Power Boilers
,
BPVC
-
I 2010
Rules for Construction of Heating Boilers
, BPVC
-
IV 2010
Rules for Construction of Pressure Vessels
, BPVC
-
VIII Division 1 2010
Rules for Construction of Pressure Vessels
, BPVC
-
VIII Division 2 Alternative Rules 2010
Rules for Construction of Pres
sure Vessels
, BPVC
-
VIII Division 3 Alternative Rules for Construction of High Pressure
Vessels 2010
ASTM
ASTM International
100 Barr Harbor Drive
West Conshohocken, PA 19428
-
2959
ASTM A108
Section 11.3
Standard Specification for Steel Bar, Carbon and Alloy
, Cold
-
Finished,
2007
a
ASTM A307
Section 11.3
Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
, 2007b
ASTM A500
Section 14.1.3.3.4
Standard Specification for Cold
-
Formed Welded and Seamless Carbon Steel Structural Tubing
in Rounds and Shapes
,
2009
b
ASTM A653
Section 14.1.3.3.3
Standard Specification for Steel Sheet, Zinc
-
Coated (Galvanized) or Zinc
-
Iron Alloy
-
Coated (Galvannealed) by the Hot
-
Dip
Process
, 2009
c
ASTM A706/A706M
Sections 14.4.4.2.2, 14.4.5.2
Standard
Specification for Low
-
Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
, 2004b
ASTM C635
Sections 13.5.6.2.1, 13.5.6.2.2
Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile
and L
ay
-
in Panel Ceilings
, 2004
a
ASTM C636
Sections 13.5.6.2.1, 13.5.6.2.2
Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay
-
in Panels
, 2004
c
ASTM D1586
Sections 11.3, 20.4.2
Standard Test Method for Penetration
Test and Split
-
Barrel Sampling of Soils
, 2004
d
ASTM D2166
Sections 11.3, 20.4.3
Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
, 2000
a
ASTM D2216
Sections 11.3, 20.4.3
Standard Test Method for Laboratory Determination of Water (Mo
isture) Content of Soil and Rock by Mass
, 1998
ASTM D2850
Sections 11.3, 20.4.3
Standard Test Method for Unconsolidated
-
Undrained Triaxial Compression Test on Cohesive Soils
, 2003
ASTM D4318
Sections 11.3, 20.4.3
Method for Liquid Limit, Plastic Limit, and Plasticity Index of Soils,
2000
b
ASTM E580
Sections 13.5.6.2.1, 13.5.6.2.2
,
Table C13.5.6.1
Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay
-
in Panels in Areas Subject to
Earthquake Ground Motions,
2009
a
AWC
American Wood Council
803 Sycolin Road, Suite 201
Leesburg, VA 20175
AWC NDS
Section 12.4.3.3, 1
2.14.3.2.3, 14.5.1
National Design Specification for Wood Construction, Including Supplements, AWC NDS
-
12, 2012
AWC SDPWS
Section 12.14.7.2, 14.5.1
Special Design Provisions for Wind and Seismic, AWC SDPWS
-
08, 2008 (previously AF&PA SDPWS
-
08)
AWWA
American
Water Works Association
6666 West Quincy Avenue
Denver, CO 80235
AWWA D100
-
05
Sections 15.4.1, 15.7.7.1, 15.7.9.4, 15.7.10.6
Welded Steel Tanks for Water Storage
, 2006
a
AWWA D103
Sections 15.4.1, 15.7.7.2, 15.7.9.5
Factory
-
Coated Bolted Steel Tanks for Wa
ter Storage
, 2009
AWWA D110
Section 15.7.7.3
Wire
-
and Strand
-
Wound Circular Prestressed Concrete Water Tanks
, 2004
AWWA D115
Section 15.7.7.3
Tendon
-
Prestressed Concrete Water Tanks,
2006
b
ICC
International Code Council
500 New Jersey Ave
nue,
NW
6th
Floor
Washington, DC 20001
*
IRC
Section 11.1.2
2012 International Residential Code
, 2012
ICC
-
ES
International Code Council Evaluation Service
5360 Workman Mill Road
Whittier, CA 90601
*ICC
-
ES AC 156
-
04 effective January 1, 2007
Section 13.2.5
Acceptance
Criteria for Seismic Qualification by Shake
-
Table Testing of Nonstructural Components and Systems,
2007
MSS
Manufacturers Standardization Society of the Valve and Fitting Industry
127 Park Street NE
Vienna, VA 22180
*MSS SP
-
58
Section 13.6.5.1
Pipe
Hangers and Supports
—
Materials, Design, and Manufacture
, 2002
NFPA
National Fire Protection Association
1 Batterymarch Park
Quincy, MA 02269
-
9101
NFPA 13
Sections 13.4.6, 13.6.5.1, 13.6.8.2
Standard for the Installation of Sprinkler Systems,
2007
NFPA 59A
Section 15.4.8
Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG)
, 2009
RMI
Rack Manufacturers Institute
8720 Red Oak Boulevard
Suite 201
Charlotte, NC 28217
ANSI/
RMI
MH 16.1
Section 15.5.3, 15.5.3.1, 15.5.3.2, 15.5.3.4
Speci
fication for the Design, Testing, and Utilization of Industrial Steel Storage Racks,
2011
SJI
Steel Joist Institute
1173B London Links Drive
Forest, VA 24551
ANSI/SJI
-
CJ
-
2010
Section 14.1.1
Standard Specification for Composite Steel Joists
, CJ
-
series, 2010
a
ANSI/SJI
-
JG
-
2010
Section 14.1.1
Standard Specification for Joist Girders
, 2010
b
ANSI/SJI
-
K
-
2010
Section 14.1.1
Standard Specifications for Open Web Steel Joists, K
-
Series
,
2005
ANSI/SJI
-
LH/DLH
-
2010
Section 14.1.1
Standard Specifications for Longspan
Steel Joists, LH
-
Series and Deep Longspan Steel Joists, DLH
-
Series
, 2010
c
TMS
The Masonry Society
3970 Broadway
Unit 201
-
D
Boulder, CO 80304
-
1135
Enter the password to open this PDF file:
File name:
-
File size:
-
Title:
-
Author:
-
Subject:
-
Keywords:
-
Creation Date:
-
Modification Date:
-
Creator:
-
PDF Producer:
-
PDF Version:
-
Page Count:
-
Preparing document for printing…
0%
Comments 0
Log in to post a comment