Product Specification Document(DOCX) - Lighting Solutions - ROM ...

psithurismaccountantUrban and Civil

Nov 29, 2013 (3 years and 6 months ago)

79 views





Copyright 2012

R•O•M Corporation All Rights Reserved.

[
1
]

FM
-
7.2
-
53
93

/ Rev A / 06
-
01
-
2012


R•O•M Corporation

6800 E 163
rd

St

Belton MO 64012

800
-
827
-
3692

LIGHTING

SPECIFICATIONS




TELESCOPING
TRIPOD

POLE






KR
-
SB
-
8
00


An R
-
O
-
M Corporation tripod telescoping light pole, part number KR
-
SB
-
800, comprised of the following components shall be supplied.


The R
-
O
-
M
Corporation 800 series tripod shall have legs and poles constructed of 6063
-
T6 extruded aluminum with a 320 grit spiral
brushed and anodized finish. The tripod shall have a full
-
sized handle for carrying, as well as to assist with opening and closing, and
an
over
-
sized locking knob to keep the device in the desired position.


The legs shall have a diameter of 3
-
3/4" when closed. The 1/3 round, 120 degree arc shaped legs neatly fold into a cylindrical shape
when closed. A 1/4 turn locking knob secures the le
gs in the open and closed position. The 50" outer pole will be 1
-
7/8" x .060" extruded
aluminum 6063
-
T6 with 320 spiral grit finish. The 40" inner tube will be made of the same material, but will be 1
-
3/8" x .060. The poles
shall have a brite dip anodized

finish.


The inner tube shall recess into the outer tube and be locked in any position by a two piece locking collar machined from 606
1
-
T6
aluminum. The locking collar assembly consists of a threaded locking cap that compresses an injection molded delrin
compression
sleeve. This locking collar assembly will provide a water
-
tight seal for the inner and outer pole. The locking collar assembly shall have a
brite dip anodized finish and lifetime warranty. Collars and main hinges shall be constructed from die
-
cast aluminum alloy painted with
durable two
-
coat silver powder paint, or alloy 6063
-
T6 with brite
-
dip anodized finish. Brackets and hardware shall be fabricated from 300
series polished stainless steel.






TELESCOPING TRIPOD POLE
-

TRUCK MOUNT




KR
-
SB
-
800
-
TM


An R
-
O
-
M Corporation tripod telescoping light pole, part number KR
-
SB
-
800
-
TM, comprised of the following components shall be
supplied.


The R
-
O
-
M Corporation 800 series tripod shall have legs and poles constructed of 6063
-
T6 extruded aluminum

with a 320 grit spiral
brushed and anodized finish. The tripod shall have a full
-
sized handle for carrying, as well as to assist with opening and closing, and an
over
-
sized locking knob to keep the device in the desired position.


The legs shall have a di
ameter of 3
-
3/4" when closed. The 1/3 round, 120 degree arc shaped legs neatly fold into a cylindrical shape
when closed. A 1/4 turn locking knob secures the legs in the open and closed position. The 50" outer pole will be 1
-
7/8" x .060" extruded
aluminum
6063
-
T6 with 320 spiral grit finish. The 40" inner tube will be made of the same material, but will be 1
-
3/8" x .060. The poles
shall have a brite dip anodized finish.


The inner tube shall recess into the outer tube and be locked in any position by a two

piece locking collar machined from 6061
-
T6
aluminum. The locking collar assembly consists of a threaded locking cap that compresses an injection molded delrin compressi
on
sleeve. This locking collar assembly will provide a water
-
tight seal for the inner
and outer pole. The locking collar assembly shall have a
brite dip anodized finish and lifetime warranty. Collars and main hinges shall be constructed from die
-
cast aluminum alloy painted with
durable two
-
coat silver powder paint, or alloy 6063
-
T6 with br
ite
-
dip anodized finish. Brackets and hardware shall be fabricated from 300
series polished stainless steel.


A truck mounting bracket kit for attachment of the tripod to an external vehicle surface shall be supplied. This kit shall co
nsist of a die cast
aluminum lower bracket that shall mount to the vehicle and cradle the bottom of the folding legs. A rubber insulator shall be

utilized to
prevent any movement or rattles. A three piece upper bracket assembly machined from 6061
-
T6 aluminum and have a brite
dip anodized
finish shall also be supplied. This three piece bracket design will consist of a clamp style saddle with removable retaining

cap that fits
around the upper portion of the outer pole. This saddle will incorporate a tongue that will fit into a
receiver that is mounted to the vehicle.
The saddle will then be secured to the receiver with a cam action pull to release lever to allow quick removal of the tripod
light from the
vehicle.


The wiring shall be routed from the light head, down the inside o
f the inner pole and out the bottom of the outer pole. The end of the cord
shall be coiled and ready to accept an electrical plug.









Copyright 2012

R•O•M Corporation All Rights Reserved.

[
2
]

FM
-
7.2
-
53
93

/ Rev A / 06
-
01
-
2012


R•O•M Corporation

6800 E 163
rd

St

Belton MO 64012

800
-
827
-
3692

LIGHTING

SPECIFICATIONS



TELESCOPING TRIPOD POLE with TRUCK MOUNT & INDICATOR


KR
-
SB
-
800
-
TM
-
I


An R
-
O
-
M Corporation tripod telescoping light
pole, part number KR
-
SB
-
800
-
TM
-
I, comprised of the following components shall be
supplied.


The R
-
O
-
M Corporation 800 series tripod shall have legs and poles constructed of 6063
-
T6 extruded aluminum with a 320 grit spiral
brushed and anodized finish. The t
ripod shall have a full
-
sized handle for carrying, as well as to assist with opening and closing, and an
over
-
sized locking knob to keep the device in the desired position.


The legs shall have a diameter of 3
-
3/4" when closed. The 1/3 round, 120 degree ar
c shaped legs neatly fold into a cylindrical shape
when closed. A 1/4 turn locking knob secures the legs in the open and closed position. The 50" outer pole will be 1
-
7/8" x .060" extruded
aluminum 6063
-
T6 with 320 spiral grit finish. The 40" inner tube w
ill be made of the same material, but will be 1
-
3/8" x .060. The poles
shall have a brite dip anodized finish.


The inner tube shall recess into the outer tube and be locked in any position by a two piece locking collar machined from 606
1
-
T6
aluminum. The
locking collar assembly consists of a threaded locking cap that compresses an injection molded delrin compression
sleeve. This locking collar assembly will provide a water
-
tight seal for the inner and outer pole. The locking collar assembly shall have a
brite dip anodized finish and lifetime warranty. Collars and main hinges shall be constructed from die
-
cast aluminum alloy painted with
durable two
-
coat silver powder paint, or alloy 6063
-
T6 with brite
-
dip anodized finish. Brackets and hardware shall be f
abricated from 300
series polished stainless steel.


A truck mounting bracket kit for attachment of the tripod to an external vehicle surface shall be supplied. This kit shall co
nsist of a die cast
aluminum lower bracket that shall mount to the vehicle and

cradle the bottom of the folding legs. A rubber insulator shall be utilized to
prevent any movement or rattles. A three piece upper bracket assembly machined from 6061
-
T6 aluminum and have a brite dip anodized
finish shall also be supplied. This three pi
ece bracket design will consist of a clamp style saddle with removable retaining cap that fits
around the upper portion of the outer pole. This saddle will incorporate a tongue that will fit into a receiver that is mount
ed to the vehicle.
The saddle will t
hen be secured to the receiver with a cam action pull to release lever to allow quick removal of the tripod light from the
vehicle.


An indicator switch to alert the operator of a raised light pole shall be supplied. The switch shall be comprised of a 1/4
amp magnetic reed
switch attached to the outer pole activated by a magnet attached to the inner pole when the pole is left in the up position.


The wiring shall be routed from the light head, down the inside of the inner pole and out the bottom of the oute
r pole. The end of the cord
shall be coiled and ready to accept an electrical plug.