Planet FPS-5P-M / FPS-5P-S Print Server Installation Guide

loyalsockvillemobNetworking and Communications

Oct 27, 2013 (3 years and 11 months ago)

106 views


HK

Sole

Distributor:



Tel.: (852) 2857
-
7227


Fax: (852) 2857
-
7239

Winco (Pacific) Limited


Email:
support@winco.com.hk

http:
//www.winco.com.hk

Planet FPS
-
5P
-
M / FPS
-
5P
-
S Print Server Installation Guide


BI
-
Admin Management Tools Installation


You need a management tool to configure the print server such as protocol used, TCP/IP address, Domain Name, SNMP and Logical

port setting etc.


Procedure:


1.

Place installation CD into the CD
-
ROM Drive; the setup screen will open automatically





2.

If the autorun does not start, execute
D:
\
setup.exe

if the drive letter of CD
-
ROM Drive is “D”



3.

click
Print Server Installation
. Then click
Management Tools and D
river
. The following screen appears.





4.

click
BiAdmin

to start the software installation



HK

Sole

Distributor:



Tel.: (852) 2857
-
7227


Fax: (852) 2857
-
7239

Winco (Pacific) Limited


Email:
support@winco.com.hk

http:
//www.winco.com.hk

Planet FPS
-
5P
-
M / FPS
-
5P
-
S Print Server Installation Guide (Con’t)


5.

After the installation, launch BiAdmin program by clicking
Start


Programs


Planet BiAdmin



Planet BiAdmin





6.

click
InitDevice


Connected Protocol…






7.

Depend on the network environment, select the appropriate protocol (
TCP/IP, IPX/SPX, NETBEUI
)







HK

Sole

Distributor:



Tel.: (852) 2857
-
7227


Fax: (852) 2857
-
7239

Winco (Pacific) Limited


Email:
support@winco.com.hk

http:
//www.winco.com.hk

Planet FPS
-
5P
-
M / FPS
-
5P
-
S Print Server Installation Guide (Con’t)


8.

If TCP/IP proto
col is chosen, input TCP/IP setting by clicking
Configuration

and
TCP/IP…

select Dynamic IP Address or Fixed IP Address. Input
IP address
,
Gateway Address

and
Subnet Mask

if Fixed IP address is chosen.





9.

If
NET
BEUI protocol is used, click
Configuration

and
NETBEUI…

input Domain Name in the field and click
Save to Device

to finish.





10.

Now the print server configuration is finished. You can continue the installation on the network workstations.

The workstation installation is different for the protocol

and the operating system you used.


Basically you can have 3 choices of printing method:

-

TCP/IP Printing


(Recommended if Windows NT / 2000 server existed)

-

PTP for TCP/IP

-

PTP for NETBEUI


Refer to the related document for details.