Academic Projects for
EEE(B.Tech/M.Tech)
2010
For Abstracts please visit our
website www.
gatesfinishingschool
.com.
2
Course of
Instruction
1.
Basics of MATLAB programming/Simulink.
2.
Designing of Simple circuits in Simulink
3.
Steady State Space Analysis of RLC Circuits
4.
Electrical Drives/Machines
a.
Basic Concepts of Motor
b.
AC/DC motors
c.
Modeling of Induction Motors
d.
Electrical Drives
e.
Various
speed controlling techniques of AC/DC motors
f.
Fuzzy/Neural Networks
5.
Power Electronics:
a.
Uncontrollable/controllable Converters
b.
Various PWM Techniques(PWM/SPWM/SVPWM/DPWM/GDPWM)
c.
Multilevel Inverters
d.
Harmonics, Active/Passive Filters
e.
DC to DC
converters(Buck/Buck Boost/Cuk/Sepic)
f.
Fuzzy/Neural Networks
6.
Power Systems
a.
Transmission/Distribution/Protection
b.
HVAC/HVDC
c.
Concepts of Facts(UPFC/SSSC/Statcom/UPQC/TCSC)
d.
Modeling of Facts Devices in Simulink/Matlab
e.
Distributed Generation
f.
Non Conventional
Energy Sources
g.
Fuzzy/Neural Networks
3
IEEE
20
10
-
200
0
S.No.
Project Title(Publication)
Year
1.
Hybrid Differential Evolution Particle Swarm Optimization Algorithm
for Reactive Power Optimization (IEEE)
2010
2.
Multiband Hysteresis Modulation and Switching
Characterization for
Sliding
-
Mode
-
Controlled Cascaded Multilevel Inverter(IEEE)
2010
3.
A Novel Three
-
Phase to Five
-
Phase Transformation Using a Special
Transformer Connection
2010
4.
Reliability Evaluation of Bulk Power Systems Incorporating UPFC
(IEEE)
2010
5.
A 28
-
Pulse AC
-
DC Converter Based SMPS for Telecom Power Supply
(BePress)
2010
6.
A Real Time Power System Harmonic Estimator considering
Fundamental Frequency Variations (BePress)
2010
7.
Feasibility Study on Application of Voltage Source Inductive
Filtering
Converter in HVDC
-
Light Systems (IEEE)
2010
8.
Supercapacitors and Battery power management for Hybrid Vehicle
Applications Using multi boost and full bridge Converters
2010
9.
A Single
-
Phase Voltage
-
Controlled Grid
-
Connected Photovoltaic
System
With Power Quality Conditioner Functionality (IEEE)
2009
10.
Transient stability control of TCSC (IEEE)
2009
11.
A Control Methodology and Characterization of Dynamics for a
Photovoltaic (PV) System Interfaced With a Distribution Network
(IEEE)
2009
12.
Reduced
rating VSC with a Zig
-
Zig transformer for current
compensation in three phase four wire distribution system (IEEE)
2009
13.
UPQC signal detection algorithm based on PSO
-
Fuzzy (IEEE)
2009
14.
Power quality improvement in conventional electronic load controller
for isolated Power Generation (IEEE)
2009
15.
Model predictive control of Unified power quality conditioner with
control saturation (IEEE)
2009
16.
A fast
-
acting dc
-
link voltage controller for 3 phase DStatcom to
compensate ac and dc loads (IEEE)
2009
17.
PMSM
speed sensor less direct torque control based on EKF (IEEE)
2009
18.
Investigation of Sub Synchronous Resonance With VSC
-
Based HVDC
Transmission Systems (IEEE)
2009
19.
Operation and control of single phase micro
-
sources in a utility
connected grid (IEEE)
2009
20.
MultiConverter Unified Power
-
Quality Conditioning System: MC
-
UPQC (IEEE)
2009
4
21.
The use of facts devices in distributed power systems
-
modeling
,interface case study(IJCE)
2009
22.
Development of Hybrid Active Power Filter Based on the Adaptive
Fuzzy
Dividing Frequency
-
Control Method (IEEE)
2009
23.
A modular fuel cell modular DC
-
DC converter concept for High
performance and Enhanced reliability (IEEE)
2009
24.
New multivariable dynamic model & robust control of a Voltage
Source Converter for power system
application (IEEE)
2009
25.
Dynamic Modeling and Simulation of Hybrid Power Systems Based on
Renewable Energy (IEEE)
2009
26.
Double Frequency Buck converter (IEEE)
2009
27.
Optimization of PI coefficients in DStatcom non linear controller for
regulating dc
voltage using Generic Algorithm (IEEE)
2009
28.
Optimal placement of shunt connected facts devices in a series
compensated long transmission line (WCE)
2009
29.
Voltage flicker compensation using STATCOM (IEEE)
2009
30.
A variable speed, sensor less, induction
motor using dc link
measurement (IEEE)
2009
31.
Soft computing techniques for the control of an active power filter
(IEEE)
2009
32.
Wide speed range estimation with parameter identification schemes of
sensor less induction motors (IEEE)
2009
33.
Design and
analysis of dynamic voltage restorer for deep voltage sag
and harmonic compensation (IEEE)
2009
34.
Constant Power Control and Fault
-
Ride
-
Through Enhancement of
DFIG Wind Turbines with Energy Storage (IEEE)
2009
35.
Modeling of FACTS Devices Based on SPWM VSCs
(IEEE)
2009
36.
Design of a Modular UPQC Configuration Integrating a Components
Economical Analysis (IEEE)
2009
37.
A New Proposal for Power Quality and Custom Power Improvement:
OPEN UPQC (IEEE)
2009
38.
Space Vector Method for Voltage Dips and Swells Analysis
(IEEE)
2009
39.
Analytical Modeling of a Square Wave Controlled Cascaded Multilevel
STATCOM (IEEE)
2009
40.
Three
-
Phase Transformer Model Including Magnetic Hysteresis and
Eddy Currents Effects (IEEE)
2009
41.
Output Feedback Control of Single
-
Phase UPQC Based
on a Novel
Model (IEEE)
2009
42.
Harmonic Analysis and Improvement of a New Solid
-
State Fault
Current Limiter (IEEE)
2009
43.
Multivariable Dynamic Model and Robust Control of a Voltage
-
Source
Converter for Power System Applications (IEEE)
2009
44.
A Versatile Control Scheme for a Dynamic Voltage Restorer for
2009
5
Power
-
Quality Improvement (IEEE)
45.
Study on a Novel Hybrid Active Power Filter Applied to a High
-
Voltage Grid (IEEE)
2009
46.
Seven
-
Level Shunt Active Power Filter for High
-
Power Drive
Systems
(IEEE)
2009
47.
Dynamic Voltage Restorer Based on Flying Capacitor Multilevel
Converters Operated by Repetitive Control (IEEE)
2009
48.
Sensor less Current Control of Three
-
Phase Inverter
-
Based Distributed
Generation (IEEE)
2009
49.
Optimum Space Vector
Computation Technique for Direct Power
Control (IEEE)
2009
50.
Wind Farms Modeling for Short
-
Circuit Level Calculations in Large
Power Systems (IEEE)
2009
51.
A Control Methodology and Characterization of Dynamics for a
Photovoltaic (PV) System Interfaced
With a Distribution Network
(IEEE)
2009
52.
Improvement of voltage stability & reduction of losses by optimal
allocation of multi type facts using GA (IEEE)
2008
53.
A 24
-
pulse AC
-
DC converter employing a pulse doubling technique for
a vector
-
controlled
induction motor drives(IETE)
2008
54.
Optimization of Network Configuration in Large Distribution Systems
Using Plant Growth Simulation Algorithm (IEEE)
2008
55.
Switching losses and harmonic investigations in multilevel inverters
(IETE)
2008
56.
Optimum Control
of Selective and Total Harmonic Distortion in
Current and Voltage under Non sinusoidal Conditions
2008
57.
Control of grid
-
interfacing inverters with integrated voltage unbalance
correction (IEEE)
2008
58.
Control strategies for distribution static
compensator for power quality
improvement(IETE)
2008
59.
Hybrid cascaded multilevel inverter with PWM control method (IEEE)
2008
60.
An Integrated Hybrid Power Supply for Distributed Generation
Applications Fed by Nonconventional Energy Sources (IEEE)
2008
61.
Modeling and implementation of an improved DSVM scheme for
PMSM DTC (IEEE)
2008
62.
Fuzzy logic based control of variable speed induction machine wind
generation system (IEEE)
2008
63.
DTC
-
SVM scheme for induction motors fed with a three level inverter
(PWASET)
2008
64.
Five
-
Level Diode Clamped Inverter to Eliminate Common Mode
Voltage and Reduce
dv/dt
in Medium Voltage Rating Induction Motor
Drives (IEEE)
2008
65.
Model Predictive Control of Parallel
-
Connected Inverters for
Uninterruptible Power Supplies
(IEEE)
2008
6
66.
Study of HVDC for its enhancement on AC/DC interconnected
transmission systems (IEEE)
2008
67.
Development of grid connected Wind/PV/BESS hybrid distribution
generation system(CIRED)
2007
68.
Enhancement of voltage quality in isolated power
systems (IEEE)
2007
69.
Interline unified power quality conditioner (IEEE)
2007
70.
Harmonics modeling and harmonics activity analysis of equipment with
switch mode power supply using matlab and simulink (IEEE)
2007
71.
Fuzzy control of fuel cell distributed
generation system(IJEE)
2007
72.
Modeling, analysis and control of cascaded
-
multilevel converter
-
based
STATCOM (IEEE)
2007
73.
Direct torque control of a three phase induction motor using a hybrid pi
/fuzzy controller (IEEE)
2007
74.
Z
bus
Transmission Network
Cost Allocation (IEEE)
2007
75.
Neural network controlled voltage disturbance detector and output
voltage regulator for Dynamic Voltage Restorer (IEEE)
2007
76.
Speed control of SR motor by self
-
tuning fuzzy PI controller with
artificial neural network
(SADHANA)
2007
77.
Fuzzy logic based light load efficiency improvement of matrix
converter based wind generation system (JATIT)
2007
78.
A Comparative Study of Control Algorithms for DSTATCOM for Load
Compensation(IEEE)
2006
79.
Application of voltage and
current controlled voltage source inverters
for distributed generation systems (IEEE)
2006
80.
Simulation of a Space Vector PWM controller for a three level voltage
fed inverter motor drive (IEEE)
2006
81.
A Neutral Point Voltage Balancing Method for Multi
-
Lev
el GTO
Inverters (IEEE)
2006
82.
Control of cascaded H
-
bridge converter based DStatcom for high
power application (IEEE)
2006
83.
Dynamic modeling and simulation of wind fuel cell ultra capacitor
hybrid power generation system (Science Direct)
2006
84.
Discrete
space vector modulation applied on a PMSM motor (IEEE)
2006
85.
Modeling and simulation for voltage sags/swell mitigation using
dynamic voltage restorer (JATIT)
2006
86.
Improving the maximum loading by optimal conductor selection of
radial distribution
systems (TFG)
2006
87.
A comparative study of control algorithms for DSTATCOM for load
compensation (IEEE)
2006
88.
Improving mains current quality for three phase three switch buck type
PWM rectifiers (IEEE)
2006
89.
Stochastic load flow analysis using
artificial neural networks (IEEE)
2006
7
90.
Modeling and control of fuel cell based distributed generation
system(JIAEE)
2005
91.
A Hybrid Particle Swarm Optimization Applied to Loss Power
Minimization(IEEE)
2005
92.
PSCAD/EMTDC Simulation of Unified Series
-
Shunt
Compensator for
Power Quality Improvement (IEEE)
2005
93.
Short term Electric Load forecasting based on radial basis function
network(IE)
2005
94.
Eighteen
-
pulse ac
-
dc converter for harmonic mitigation in VCIMD
(IEEE)
2005
95.
Simulink Model for Economic
Analysis and Environmental Impacts of
a PV With Diesel
-
Battery System for Remote Villages (IEEE)
2005
96.
Impacts
of
AC
Generators
and
DSTATCOM
devices
onthe
dynamic
pe
rformance
of
distribution systems(IEEE)
2005
97.
An optimal load shedding approach for
distribution networks with DGs
(IEEE)
2005
98.
Distribution Network Reconfiguration for Loss Reduction by Hybrid
Differential Evolution (TFG)
2005
99.
A reduced switching frequency modulation algorithm for high power
multilevel inverters (IEEE)
2005
100.
An
optimum UPQC with minimum VA requirement and mitigation of
unbalanced voltage sag (BePress)
2005
101.
Robust control against rotor resistance variations for speed sensor less
induction motors (IEEE)
2005
102.
Static VAR compensator based voltage control implemen
tation of
single phase self excited induction generator (IEEE)
2005
103.
Real & reactive power co
-
ordination of UPFC (IEEE)
2004
104.
Matlab/simulink implementation for reducing the motor derating and
torque pulsation of induction motor using matrix converter
(IEEE)
2004
105.
Fuzzy logic speed control of a dc motor (IEEE)
2004
106.
Optimal placement, replacement and sizing of capacitor Banks in
distorted distribution networks by genetic algorithms (IEEE)
2004
107.
Damping power system oscillations using a genetic
algorithm based
unified power flow controller (IEEE)
2004
108.
A simple new control technique for UPQC (IEEE)
2004
109.
Direct power control for three
-
phase PWM rectifier with active filtering
function (IEEE)
2003
110.
A New topology for Unipolar Brushless DC
motor drive with high
power factor (IEEE)
2003
111.
Operating stationary fuel cells on power system and micro grids (IEEE)
2003
8
112.
UPFC controller design for power system stabilization with improved
genetic algorithm (IEEE)
2003
113.
GA neuro
-
fuzzy damping
control system for UPFC to enhance power
system transient stability (IEEE)
2003
114.
Performance optimization in switched reluctance motor drives with
online commutation angle control (IEEE)
2003
115.
Low cost inverter for domestic fuel cell applications (IEEE)
2002
116.
Harmonics elimination technique applied to an NPC topology three
level inverter used as static VAR compensator (IEEE)
2002
117.
A multilevel inverter approach providing dc link balancing, ride
through enhancement and common mode voltage elimination
(IEEE)
2002
118.
The use of matrix converter in direct torque control of induction
machines (IEEE)
2001
119.
Automatic Voltage Regulator Using an AC Voltage
–
Voltage Converter
(IEEE)
2000
120.
Loss Power Minimization Using Particle Swarm Optimization (IEEE)
2000
121.
Multilevel inverter modulation schemes of eliminate common mode
voltages (IEEE)
2000
122.
Power system stability improvement using energy storage with fuzzy
logic controller (IEEE)
2000
123.
Control of parallel connected inverters in standalone ac supply systems
(IEEE)
1993
IEEE
2010
(
FOR
M.
TECH
.)
S.No.
Project Title(Publication)
Year
124.
An Analytic Model for Fault Diagnosis in Power Systems Considering
Malfunctions of Protective Relays and Circuit Breakers
2010
125.
Fault
-
Location System for Multi terminal
Transmission Lines
2010
126.
A Fuzzy Rule
-
Based Approach for Islanding Detection in Distributed
Generation
2010
127.
A Novel Three
-
Phase to Five
-
Phase Transformation Using a Special
Transformer Connection
2010
128.
High
-
Efficiency Voltage Regulator for Rural
Networks
2010
129.
Optimized Modulation for AC
–
DC Harmonic Immunity in VSC HVDC
Transmission
2010
130.
Optimal Capacitor Placement and Sizing in Unbalanced Distribution
Systems With Harmonics Consideration Using Particle Swarm
Optimization
2010
131.
Design of a
Mode Decoupling STATCOM for Voltage Control of Wind
-
Driven Induction Generator Systems
2010
9
132.
A Power
-
Quality Index to Assess the Impact of Voltage Harmonic
Distortions and Unbalance to Three
-
Phase Induction Motors
2010
133.
Power
-
Management Strategies for a
Grid
-
Connected PV
-
FC Hybrid
System
2010
134.
Optimal location and control of shunt FACTS for transmission of
renewable energy in large power systems
2010
135.
Wind Farm to Weak
-
Grid Connection using UPQC custom power device
2010
136.
Enhancement of power quality in
distribution system using D
-
STATCOM
2010
137.
Research on three
-
level static synchronous compensator
2010
138.
Control Scheme of Cascaded H
-
Bridge STATCOM Using Zero
-
Sequence Voltage and Negative
-
Sequence Current
2010
139.
Instantaneous power control of D
-
STATCOM
with consideration of
power factor correction
2010
140.
A new 84
-
pulse VSC configuration using multi
-
level DC voltage
reinjection for especial applications
2010
141.
Non Linear Control of STATCOM
2010
142.
A High Performance Induction Motor Drive System Using Fuzzy
Logic
Controller
2010
143.
An Online Simplified Rotor Resistance Estimator for Induction Motors
2010
144.
Design of a hybrid PID plus fuzzy controller for speed control of
induction motors
2010
145.
Design on Vector Control System of AC Motor for Hybrid Electric
Vehicles
2010
146.
A hybrid system based approach to Direct Torque Control (DTC) of
induction motors
2010
147.
Vector controlled PMSM drive based on fuzzy speed controller
2010
148.
Design of controller for PMSM
2010
149.
Single
-
phase hybrid active power filter using
single switch parallel active
filter and simple passive filter
2010
150.
Implementation and Control of an Hybrid Multilevel Converter with
Floating DC
-
links for Current Waveform Improvement
2010
151.
Harmonic elimination in single phase systems by means of a
hybrid
series active filter (HSAF)
2010
152.
APF for harmonic voltage resonance suppression in distribution system
2010
153.
Dynamic DC
-
bus voltage control strategies for a three
-
phase high power
shunt active power filter
2010
154.
Control circuit for active power
filter with an instantaneous reactive
power control algorithm modification
2010
155.
A hybrid system based approach to Direct Torque Control (DTC) of
induction motors
2010
156.
Torque ripple reduction in direct torque control of induction machines by
use of all
voltage vectors of matrix converters
2010
10
157.
Novel Direct Torque Control Based on Space Vector Modulation With
Adaptive Stator Flux Observer for Induction Motors
2010
158.
Improved Fault
-
Location System for Railway Distribution System Using
Superimposed Signal
2010
159.
Input
-
Output Linearization and Robust Sliding
-
Mode Controller for the
VSC
-
HVDC Transmission Link
2010
160.
ANN
-
Based SVC Switching at Distribution Level for Minimal
-
Injected
Harmonics
2010
161.
Reference Current Computation for Active Power Filters by
Running
DFT Techniques
2010
162.
Dynamic Hysteresis Current Control to Minimize Switching for Three
-
Phase Four
-
Leg VSI Topology to Compensate Nonlinear Load
2010
163.
Design and Implementation of a Current
-
Source Converter for Use in
Industry Applications of
D
-
STATCOM
2010
164.
Design of a 28 V
-
to
-
300 V/12 kW Multicell Interleaved Flyback
Converter Using Intercell Transformers
2010
165.
Implementation and Performance Evaluation of a Fast Dynamic Control
Scheme for Capacitor
-
Supported Interline DVR
2010
166.
Effects of
Switching Asymmetry on an Isolated Full
-
Bridge Boost
Converter
2010
167.
A High
-
Power
-
Factor Single
-
Stage Single
-
Switch Electronic Ballast for
Compact Fluorescent Lamps
2010
168.
A Three
-
Phase Interleaved DC
–
DC Converter With Active Clamp for
Fuel Cells
2010
169.
Flexible Power Electronic Transformer
2010
170.
Single
-
Phase AC
–
AC Converter Based on Quasi
-
Z
-
Source Topology
2010
171.
An Inrush Mitigation Technique of Load Transformers for the Series
Voltage Sag Compensator
2010
Enter the password to open this PDF file:
File name:
-
File size:
-
Title:
-
Author:
-
Subject:
-
Keywords:
-
Creation Date:
-
Modification Date:
-
Creator:
-
PDF Producer:
-
PDF Version:
-
Page Count:
-
Preparing document for printing…
0%
Comments 0
Log in to post a comment