EI 2011年收录我校教师论文情况 根据图书馆信息技术部初步检索,EI ...

lochfobbingMechanics

Oct 30, 2013 (3 years and 7 months ago)

509 views

EI 2011
年收录我校教师论文情况


根据图书馆信息技术部初步检索,
EI 2011

(
检索日期为
2011

12

14

)
收录广东
工业大学教师(仅第一作者所属单位为广东工业大学)的论文有
731
篇,具体如下:


1.Control strategy & calibration of fuel film compensation in the transient conditions

Peng, Meichun (Guangdong University of Technology, Guangzhou, 51
0006, China); Liang,
Xiaofeng; Xu, Chaomin; Lin, Yiqing Source: Advanced Materials Research, v 347
-
353, p
2593
-
2598, 2012, Renewable and Sustainable Energy


2.The 3D measuring method based on the color coding grating

Chen, Jian (Guangdong University of Tec
hnology, China); Li, Ketian; Ouyang, Xiangbo; Ding,
Shaohua Source: Applied Mechanics and Materials, v 109, p 385
-
389, 2012, Emerging Systems
for Materials, Mechanics and Manufacturing


3.The research of teaching reform on innovation experiment mode of civ
il "Whole process"

Guo, Yongchang (Guangdong University of Technology, Faculty of Civil and Transportation
Engineering, Guangzhou, 510006, China); Li, Lijuan; Xie, Zhihong; Zhu, Jiang; Xie, Jianhe
Source: Applied Mechanics and Materials, v 121
-
126, p 1143
-
1146, 2012, Frontiers of
Manufacturing and Design Science II


4.Preparation and application of high molecular weight coagulant made from ilmenite residues

Guo, Qingquan (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology
, Guangzhou University, 510006, China); Wang, Xiaofeng; Li, Lei; Li, Daguang; Zhu,
Wenxin Source: Applied Mechanics and Materials, v 121
-
126, p 1234
-
1238, 2012, Frontiers of
Manufacturing and Design Science II


5.Multi
-
objective optimal design of frame str
uctures with group search optimizer

Liu, Feng (Faculty of Civil and Transportation Engineering, Guangdong University of Technology,
Guangzhou, 510006, China); Li, Lijuan; Yuan, Bing Source: Applied Mechanics and Materials, v
121
-
126, p 968
-
975, 2012, Front
iers of Manufacturing and Design Science II


6.Mechanical properties of modified polypropylene coarse fiber
-
reinforced, high
-
strength,
lightweight concrete

Zhang, Ronghui (Higher Education Mega Center, School of Civil and Communications
Engineering, Guangd
ong University of Technology, Panyu District, Guangzhou 51006, China); Li,
Jian Source: Advanced Materials Research, v 374
-
377, p 1499
-
1506, 2012, Sustainable
Development of Urban Environment and Building Material


7.Characterization of Cr
-
α
-
Al2O3 composite coatings electrodeposited from Cr(III) plating bath

Sun, Xin (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, Guangdong, 510006, China); He, Xiangzhu; Wang, Yongx
iu; Fu,
Zhihong Source: Applied Mechanics and Materials, v 121
-
126, p 60
-
64, 2012, Frontiers of
Manufacturing and Design Science II


8.Investigation into the electromagnetic interference shielding effectiveness of silicon rubber filled
with carbon fiber

Hu
, Yongjun (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou
510006, China); Zhang, Haiyan; Xiao, Xiaoting; Li, Feng; Cheng, Xiaoling; Hu, Guanghui Source:
Applied Mechanics and Materials, v 110
-
116, p 1392
-
1396, 2012, Mechanica
l and Aerospace
Engineering


9.A study on planarization grinding process based on the cluster magnetorheological effect

Yan, J.W. (Faculty of Electromechanical Engineering, Guangdong University of Technology,
China); Yan, Q.S.; Lu, J.B.; Kong, L.Y.; Wu, Z.
C. Source: Materials Science Forum, v 697
-
698, p
44
-
48, 2012, Advances in Materials Manufacturing Science and Technology XIV


10.Key factors for the dynamic
-
static drainage consolidation method

Zhang, Lijuan (Guangdong University of Technology, Guangzhou,
China); Li, Zhangming; Tim
Law, K. Source: Applied Mechanics and Materials, v 105
-
107, p 827
-
831, 2012, Vibration,
Structural Engineering and Measurement I


11.Energy research and endogenous growth

Zuo, Hui (School of Economics and Commerce, Guangdong Univ
ersity of Technology,
Guangzhou City, China); Ai, Danxiang Source: Advanced Materials Research, v 347
-
353, p
2907
-
2912, 2012, Renewable and Sustainable Energy


12.Blue fluorescent quantum dots
-
based probe for detection of influenza b virus

Wen, Junlin (Dep
artment of Pharmaceutical Engineering, Faculty of Chemical Engineering and
Light Industry, Guangdong University of Technology, Guangzhou 510006, China); He, Daigui;
Zhao, Suqing Source: Advanced Materials Research, v 365, p 18
-
22, 2012, Future Materials
En
gineering and Industry Application


13.A study of polyvinyl chloride modified by barium sulfate

Wu, Hao (Guangdong University of Technology, Guangzhou, Guangdong Province, China); Cao,
Youming Source: Applied Mechanics and Materials, v 117
-
119, p 1402
-
1405
, 2012, Materials and
Computational Mechanics


14.Risk consequence assessment of existing bridges using fuzzy based analytic hierarchy process

Deng, Jun (Facculty of Civil and Transportation Engineering, Guangdong University of
Technology, Guangzhou, 51000
6, China); Li, Jian; Fang, Xiaoyue Source: Advanced Materials
Research, v 374
-
377, p 2021
-
2024, 2012, Sustainable Development of Urban Environment and
Building Material


15.Preparation and antioxidant properties of collagen polypeptide from Navodon septent
ionalis
bone

Yang, Lu (Faculty of Light and Chemical, Guangdong University of Technology, Guangzhou,
Guangdong, 510000, China); Ding, Lijun Source: Advanced Materials Research, v 361
-
363, p
804
-
807, 2012, Natural Resources and Sustainable Development


16.S
tudy on the solidification/stabilization treatment of tannery sludge

Tian, Yu (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou Guangdong 510006, China); Ning, Xunan; Liu, Jingyong; Zhou, Jianbo;
Yang, Zuoyi;
Li, Lei Source: Advanced Materials Research, v 356
-
360, p 1951
-
1954, 2012,
Progress in Environmental Science and Engineering


17.Design for turntable of spray rack

Zhang, Weihao (Faculty of Electromechanical Engineering, Guangzhou Higher Education Mega
Cen
ter, Guangdong University of Technology, No. 100 Waihuan Xi Road, Panyu District,
Guangzhou, China); Li, Ketian Source: Applied Mechanics and Materials, v 120, p 269
-
274, 2012,
Product Design and Manufacture


18.An optimal process for ultrasonic amplitude
transformer design with FEM

Liu, G.Y. (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, Guangdong Province, China); Guo, Z.N.; Li, Y.B.; Wang, G.; Huang, Z.G. Source:
Advanced Materials Research, v 346, p 116
-
121,
2012, Sustainable Construction Materials
and Computer Engineering


19.Rubber modified asphalt mixture properties and mechanical testing

Zhang, Rong Hui (Faculty of Civil and Traffic Engineering, Guangdong University of Technology,
Guangzhou, Guangdong, 51
0006, China); Liu, Jia; Huang, Jian Chao; Fu, Yi Source: Applied
Mechanics and Materials, v 105
-
107, p 810
-
817, 2012, Vibration, Structural Engineering and
Measurement I


20.A reddish orange
-
emitting stoichiometric phosphor K<inf>3</inf>Eu(PO
<inf>4</in
f>)<inf>2</inf> for white light
-
emitting diodes

Ju, Guifang (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Waihuan Xi Road, No. 100, Guangzhou 510006, China); Hu, Yihua; Chen, Li; Wang,
Xiaojuan; Mu, Zhongfei; Wu, Ha
oyi; Kang, Fengwen Source: Optics and Laser Technology, v
44, n 1, p 39
-
42, February 2012


21.Investigation and implementation of environmental protection and energy saving

Du, Yi (Guangdong University of Technology, China); Chen, Qingxin; Chen, Jianwei
Source:
Advanced Materials Research, v 347
-
353, p 3271
-
3274, 2012, Renewable and Sustainable
Energy


22.Multi
-
mode extension control of pump
-
control electro
-
hydraulic servo system based on PLC

Zheng, Hongbo (Faculty of Materials and Energy, Guangdong Un
iversity of Technology,
Guangzhou, China); Sun, Yousong; Li, Mian; Xian, Canbiao Source: Applied Mechanics and
Materials, v 121
-
126, p 244
-
248, 2012, Frontiers of Manufacturing and Design Science II


23.The researches and analysis on lakes water quality

of the Guangzhou Higher Education Mega
Center

Hu, Quan (School of Civil and Transportation Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Wang, Zhihong; Guo, Yan; Gao, Dan Source: Advanced Materials
Research, v 347
-
353, p 2268
-
2272, 2012, Renewable and Sustainable Energy


24.Thermal and FTIR characterization of unsaturated polyester resin/epoxy resin composites

Liao, Zhengfu (Faculty of Materials and Energy, Guangdong University of Technology,
Guangdong Guangzhou, 510006, Chi
na); Xu, Dongying; Zhang, Fengjun; Li, Chong; Xiao,
Wuhua Source: Applied Mechanics and Materials, v 117
-
119, p 905
-
907, 2012, Materials
and Computational Mechanics


25.Theoretical study on axial capacity of CFRP reinforced self
-
stressing concrete fille
d steel tubes

Li, Hui (Faculty of Civil and Transportation Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Deng, Jun; Lin, Junhong Source: Applied Mechanics and Materials,
v 121
-
126, p 3025
-
3029, 2012, Frontiers of Manufacturi
ng and Design Science II


26.Characteristics of extracellular polymeric substances (EPS) and enzymes during the
aerobic/anoxic digestion of sewage sludge after ultrasonic pretreatment

Zheng, Li (Faculty of Environmental Science and Engineering, Guangdong U
niversity of
Technology, Guangzhou, 510006, China); Sun, Shuiyu; Xu, Yanbin; Liu, Baojian; Yao, Weiting;
Cai, Mingshan; Tong, Wenjin Source: Advanced Materials Research, v 347
-
353, p 2008
-
2014,
2012, Renewable and Sustainable Energy


27.Deacidification
of paper in supercritical carbon dioxide (CO <inf>2</inf>SCF) solvent system
with magnesium acetate and calcium hydroxide

Wang, Yanjuan (Faculty of Light Industry and Chemical Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Tan,
Wei; Liu, Chunying; Fang, Yanxiong Source:
Advanced Materials Research, v 347
-
353, p 504
-
507, 2012, Renewable and Sustainable
Energy


28.Fatigue behavior of reinforced concrete beams strengthened with prestressed fiber reinforced
polymer

Xie, J.H. (Facu
lty of Civil and Transportation Engineering, Guangdong University of Technology,
Higher Education Mega Center, 100 Waihuan Xi Road, Guangzhou 510006, China); Huang, P.Y.;
Guo, Y.C. Source: Construction and Building Materials, v 27, n 1, p 149
-
157, Februa
ry 2012


29.Optimization for pipeline system of air
-
conditioner based on finite element simulation

Li, Suyang (Faculty of Electro
-
Mechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Guo, Jun; Zhang, Xiaowei; Tang, Wenyan S
ource: Applied
Mechanics and Materials, v 121
-
126, p 2151
-
2155, 2012, Frontiers of Manufacturing and
Design Science II


30.Testing and analysis of high
-
speed camera for pulse MIG/MAG welding droplet transition

Wen, Yuan Mei (South China University of Te
chnology, Guangzhou 510641, China); Huang, Shi
Sheng; Liu, Gui Xiong Source: Applied Mechanics and Materials, v 103, p 134
-
137, 2012,
Advances in Precision Instrumentation and Measurement


31.Design of LED backlight module used for large
-
size TFT
-
LCD

Zh
ou, Jinyun (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Xu, Jisen; Lin, Qinghua; Pei, Wenyan Source: Applied
Mechanics and Materials, v 109, p 485
-
488, 2012, Emerging Systems for Materi
als,
Mechanics and Manufacturing


32.Indoor thermal environment studies and comparisons of representative residential buildings in
urban village of guangzhou during typical weather in summer

Li, Zhisheng (Faculty of Civil and Transportation Engineering, Gu
angdong University of
Technology, Guangzhou, 510006, China); Liao, Jiawen; Liu, Xuhong Source: Advanced Materials
Research, v 374
-
377, p 66
-
69, 2012, Sustainable Development of Urban Environment and
Building Material


33.A heuristics based on RA for two
-
stage flexible flow shop scheduling with head group
constraint

Li, Zhantao (Key Laboratory of Computer Integrated Manufacturing System of Guangdong
Province, Guangdong University of Technology, Guangzhou, Guangdong Province 510006,
China); Chen, Qingxin;
Mao, Ning Source: Applied Mechanics and Materials, v 101
-
102, p
783
-
789, 2012, Advances in Engineering Design and Optimization II


34.Characteristics of chip formation in the micro
-
drilling of multi
-
material sheets

Zheng, Lijuan (Guangdong University of

Technology, Guangzhou 510006, China); Wang,
Chengyong; Yang, Lipeng; Song, Yuexian; Fu, Lianyu Source: International Journal of Machine
Tools and Manufacture, v 52, n 1, p 40
-
49, January 2012


35.Effect of acid deposition on soil Ca<sup>2+</sup> content
s of two forest ecosystems in
Dinghushan Biosphere Reserve

Wu, Jianping (Facualty of Environmental Science and Technology, Guangdong University of
Technology, Guangzhou, Guangdong, 510006, China); Ying, Pan; Tan, Peiyuan; Liu, Tao Source:
Advanced Material
s Research, v 356
-
360, p 2601
-
2605, 2012, Progress in Environmental
Science and Engineering


36.Facile synthesis of N
-
{2
-
[4
-
(2
-
pyrimidinyl)
-
1
-
piperazinyl]ethyl} adamantane
-
1
-
carboxamide

Su, Qiang (Faculty of Chemical Engineering and Light Industry, Guan
gdong University of
Technology, Guangzhou, 51006, China); Guo, Jianwei; Yang, Chufen; Cui, Yingde Source:
Applied Mechanics and Materials, v 117
-
119, p 1319
-
1322, 2012, Materials and
Computational Mechanics


37.Immunomodulatory and anticancer activities

of phenolics from emblica fruit (Phyllanthus
emblica L.)

Liu, Xiaoli (Department of Food and Biology Technology, Faculty of Chemical Engineering and
Light Industry, Guangdong University of Technology, Guangzhou 510006, China); Zhao,
Mouming; Wu, Kegang; C
hai, Xianghua; Yu, Hongpeng; Tao, Zhihua; Wang, Jinshui Source:
Food Chemistry, v 131, n 2, p 685
-
690, March 15, 2012


38.An investigation about solid equal channel angular extrusion on polypropylene/organic
montmorillonite composite

Li, Hong (Faculty of

Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou 510090, China); Huang, Xun; Huang, Chengya; Zhao, Yaoming Source:
Journal of Applied Polymer Science, v 123, n 4, p 2222
-
2227, February 15, 2012


39.Gaussian kernel
-
b
ased fuzzy inference systems for high dimensional regression

Cai, Qianfeng (Faculty of Applied Mathematics, Guangdong University of Technology, No. 100
Waihuan Xi Road, Guangzhou, China); Hao, Zhifeng; Yang, Xiaowei Source: Neurocomputing,
v 77, n 1, p 19
7
-
204, 01 February 2012


40.Research on the removal of algae by inorganic
-
organic compound modified bentonite

Nie, Jinxu (Department of Civil and Traffic Engineering, Guangdong University of Technology,
GDUT, Guangzhou, China); Liu, Mi Source: 2011 2nd In
ternational Conference on Mechanic
Automation and Control Engineering, MACE 2011
-

Proceedings, p 6803
-
6806, 2011, 2011
2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011
-

Proceedings


41.Study on micro
-
polluted raw w
ater treatment by rectangular biological sedimentation tanks

Wang, Heping (Faculty of Civil and Transportation Engineering, Guangdong University of
Technology, Guangzhou, China); Liu, Liang Source: 2011 2nd International Conference on
Mechanic Automation a
nd Control Engineering, MACE 2011
-

Proceedings, p 3519
-
3522, 2011,
2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE
2011
-

Proceedings


42.Structural and electrical properties of Ta2O5 thin films prepared by photo
-
i
nduced CVD

Liu, Jun (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou
510006, China); Wei, Aixiang; Zhao, Xianghui; Zhang, Haiyan Source: Bulletin of Materials
Science, v 34, n 3, p 443
-
446, June 2011


43.Luminescence investi
gation of Eu<sup>3+</sup>
-
Bi<sup>3+</sup> co
-
doped
CaMoO<inf>4</inf> phosphor

Kang, Fengwen (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Hu, Yihua; Wu, Haoyi; Ju, Guifang; Mu, Zhongfei; Li
,
Nana Source: Journal of Rare Earths, v 29, n 9, p 837
-
842, September 2011



44.Study on treatment of printing and dyeing wastewater by magnetic seed coagulation
-

High
gradient magnetic separation

Chen, Wensong (Faculty of Environmental Science and Eng
ineering, Guangdong University of
Technology, Guangzhou, China); Lin, Huashi; Zhang, Shuo
-
Feng Source: Applied Mechanics and
Materials, v 71
-
78, p 2689
-
2694, 2011, Frontiers of Green Building, Materials and Civil
Engineering


45.Camera self
-
calibration
method based on GA
-
PSO algorithm

Li, Jing (School of Automation, Guangdong University of Technology, Guangzhou, China); Yang,
Yimin; Fu, Genping Source: CCIS2011
-

Proceedings: 2011 IEEE International Conference on
Cloud Computing and Intelligence Systems,

p 149
-
152, 2011, CCIS2011
-

Proceedings: 2011
IEEE International Conference on Cloud Computing and Intelligence Systems


46.Magnetic properties of NiFe<inf>2</inf>O<inf>4</inf> thin films grown on
La<inf>0.7</inf>Sr<inf>0.3</inf>MnO<inf>3</inf>
-
buffered

Si substrate

Tong, J.J. (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou, Guangzhou Higher Education Mega Center, 510006, China); Liu, Q.X.;
Jiang, Y.P.; Tang, X.G.; Zhou, Y.C.; Chen, J. Source: Vacuum, v 8
6, n 3, p 340
-
343, October 8,
2011


47.Application of pile underpinning for strengthening design of Longgan bridge

Tan, Yiping (Faculty of Civil and Transportation Engineering, Guangdong University of
Technology, Guangzhou, 510006, China); Li, Jian; Zou,
Jinhua; Jiang, Haibo Source: Advanced
Materials Research, v 163
-
167, p 3465
-
3473, 2011, Advances in Structures


48.Study on cell nucleation behavior of HDPE
-
wood composites/supercritical CO<inf>2</inf>
solution based on rheological properties

Zhang, Jin
gjing (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Rizvi, Ghaus M.; Park, Chul B.; Hasan, Mohammad M. Source:
Journal of Materials Science, v 46, n 11, p 3777
-
3784, June 2011


49.Synthesis and characteri
zation of 3Y
-
TZP powders by stirring ball milling

Li, Da Guang (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, Guangdong, 510006, China); Wu, Zhi; Pan, Chun Yang; Fu, Wei Qin;
Wang, Qiu Hong Source: Advan
ced Materials Research, v 239
-
242, p 2790
-
2794, 2011,
Advanced Materials


50.Modified wavelet based morphological correlation for rotation
-
invariant recognition

Wang, Qu (School of Physics and Optoelectronic Engineering, Guangdong University of
Technolo
gy, Guangzhou 510006, China); Chen, Li; Zhou, Jinyun; Lin, Qinghua Source: Optics
and Laser Technology, v 43, n 8, p 1504
-
1512, November 2011


51.Reduction of supercooling of water by TiO<inf>2</inf> nanoparticles as nucleating agent

Mo, Song Ping (Facul
ty of Material and Energy, Guangdong University of Technology, No. 100
Waihuan Xi Road, Guangzhou, 510006, China); Chen, Ying; Jia, Li Si; Li, Xing; Luo, Xiang Long
Source: Advanced Materials Research, v 236
-
238, p 1935
-
1938, 2011, Application of
Chemic
al Engineering


52.Flow dynamic simulation of micro abrasive water jet

Fan, Jingming (School of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Fan, Changming; Wang, Jun Source: Diffusion and Defect Data Pt.B:
S
olid State Phenomena, v 175, p 171
-
176, 2011, Application of Diamond and Related
Materials


53.Event
-
triggered time synchronization algorithm in Medium and High Rate WSN

Wang, Yuechao (Faculty of Automation, Guangdong University of Technology, 729 East
Dongfeng Road, Guangzhou, 510006, China); Cheng, Lianglun Source: Applied Mechanics and
Materials, v 65, p 307
-
310, 2011, Mechatronic Systems and Automation Systems, MSAS
2011


54.Advanced Materials Research: Preface

Li, Lijuan (Guangdong University of

Technology, China) Source: Advanced Materials Research,
v 163
-
167, 2011, Advances in Structures


55.Effect of crack on interfacial stresses of RC beam strengthened with CFRP

Guo, Yongchang (Guangdong University of Technology, Faculty of Civil and Trans
portation
Engineering, Guangzhou, China); Huang, Hanlin; Li, Lijuan; Deng, Jun; Zhong, Genquan Source:
Key Engineering Materials, v 462
-
463, p 559
-
562, 2011, Fracture and Strength of Solids VII


56.Influences of strain rates on the superplastic deformat
ion behavior in
(Zr<inf>72</inf>Cu<inf>16.5</inf> Ni<inf>11.5</inf>)<inf>90</inf>Al<inf>10</inf> bulk
amorphous alloy

Tao, Ping
-
Jun (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Yang, Yuan
-
Zheng; Bai, Xiao
-
Jun Source: Gongneng Cailiao/Journal
of Functional Materials, v 42, n 1, p 10
-
13, January 2011



57.Synthesis and characterization of PMMA
-
b
-
PHEMA by atom transfer radical polymerization

Su, Yongfeng (Faculty of Chemical Engineering and Light Industry, G
uangdong University of
Technology, Guangzhou 510006, China); Yi, Guobin; Lin, Wenjing; Hu, Weitao; Chen, Chao
Source: Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering, v
27, n 5, p 13
-
16, May 2011


58.Researching on the ads
orption of protein on gold nanoparticles

Yuan, Juan (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guang Zhou, 510006, China); Guo, Qing Quan; He, Xiang Zhu; Liu, Yan Ping
Source: Advanced Materials Research, v 19
4
-
196, p 462
-
466, 2011, Advanced Engineering
Materials


59.Higher
-
order Takagi
-
Sugeno fuzzy model based on kernel mapping

Cai, Qian
-
Feng (Faculty of Applied Mathematics, Guangdong University of Technology,
Guangzhou Guangdong 510090, China); Hao, Zhi
-
Fen
g; Yang, Xiao
-
Wei Source: Kongzhi Lilun
Yu Yingyong/Control Theory and Applications, v 28, n 5, p 681
-
687, May 2011


60.Networked optimal predictive state estimation

Tang, Bin (Faculty of Automation, Guangdong University of Technology, Guangzhou Guangdon
g
510006, China); Zeng, Qi
-
Jie; Zhang, Yun Source: Kongzhi Lilun Yu Yingyong/Control Theory
and Applications, v 28, n 5, p 727
-
734, May 2011


61.Investigation of the trap state of Sr<inf>2</inf>MgSi<inf>2</inf>O <inf>7</inf>:
Eu<sup>2+</sup>, Dy<sup>3+</
sup> phosphor and decay process

Wu, Haoyi (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Waihuan Xi Road No.100, Guangzhou 510006, China); Hu, Yihua; Wang, Xiaojuan
Source: Radiation Measurements, v 46, n 6
-
7, p 591
-
594, June
-
July 2011


62.PID control design for a class of second
-
order nonlinear systems based on extended
Takagi
-
Sugeno fuzzy models

Hu, Jun (Faculty of Automation, Guangdong University of Technology, Guangzhou, 510006,
China); Wang, Yin
-
He; Cui, Yue
-
Yu
an; Zhang, Yun Source: Proceedings of the 2011 Chinese
Control and Decision Conference, CCDC 2011, p 1566
-
1571, 2011, Proceedings of the 2011
Chinese Control and Decision Conference, CCDC 2011


63.Tunable luminescent properties by adjusting the Sr/Ba rat
io in Sr
<inf>1.97
-
x</inf>Ba<inf>x</inf>MgSi<inf>2</inf>O<inf>7</inf>:Eu
<sup>2+</sup><inf>0.01</inf>, Dy<sup>3+</sup><inf>0.02</inf> phosphors

Wu, Haoyi (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 51000
6, China); Hu, Yihua; Zeng, Bodai; Mou, Zhongfei; Deng, Liuyong
Source: Journal of Physics and Chemistry of Solids, v 72, n 11, p 1284
-
1289, November 2011


64.Performance of rubberized high strength concrete after fire

Liu, Feng (Guangdong University of
Technology, Guangzhou, 510006, China); Chen, Guixuan; Li,
Lijuan Source: Advanced Materials Research, v 163
-
167, p 1403
-
1408, 2011, Advances in
Structures


65.Design formulae of unsymmetrical double
-
gap output cavities of klystrons

Fu
-
Min, Lin (School o
f Physics and Optoelectronic Engineering, Guangdong University of
Technology, GuangZhou 510006, China); Hai
-
Xu, Liu Source: International Journal of Electronics,
v 98, n 5, p 617
-
630, May 2011


66.Determination and distribution of heavy metals in the mun
icipal waste incinerator slags from
Guangdong Province

Liu, Jingyong (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangdong Guangzhou, 510006, China); Sun, Shuiyu; Zhang, Rongxue; Zhong,
Sheng Source: Applied Mecha
nics and Materials, v 55
-
57, p 229
-
232, 2011, Recent Trends
in Materials and Mechanical Engineering Materials, Mechatronics and Automation


67.A controlling method for realizing chaotic synchronization and generating a special multi
-
wing
attractor

Xi, H
uiling (Guangdong University of Technology, College of Automation, Guangzhou, 510006,
China); Yu, Simin Source: 2011 International Conference on Electric Information and Control
Engineering, ICEICE 2011
-

Proceedings, p 1911
-
1916, 2011, 2011 Internationa
l Conference
on Electric Information and Control Engineering, ICEICE 2011
-

Proceedings


68.Raman analysis of the silicon wafer scratched by single point diamond

Chen, Zhuo (Guangdong University of Technology, Guangzhou, China); Wei, Xin; Xie, Xiaozhu;
Ren
, Qinglei Source: Diffusion and Defect Data Pt.B: Solid State Phenomena, v 175, p 82
-
86,
2011, Application of Diamond and Related Materials


69.(2D)<sup>2</sup>PCA plus (2D)<sup>2</sup>LDA: A new feature extraction for face
recognition

Huang, Guohong (
Faculty of Information Engineering, Guangdong University of Technology,
Guangzhou 510006, China) Source: Proceedings of SPIE
-

The International Society for Optical
Engineering, v 8009, 2011, Third International Conference on Digital Image Processing,
I
CDIP 2011


70.Preparation of poly[poly(ethylene glycol) diacrylate] microspheres by dispersion
polymerization in polysaccharide solution

Tan, Guo
-
Xin (Institute of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou 51000
6, China); Liao, Jing
-
Wen; Ning, Cheng
-
Yun; Zhang, Lin Source:
Gongneng Cailiao/Journal of Functional Materials, v 42, SUPPL. JUNE, p 398
-
400+404, June
2011


71.Study on compound machining of polyurethane polishing pad and cluster abrasive brush based
on

MR effect

Li, M. (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Yan, Q.S.; Lu, J.B.; Chai, J.F. Source: Key Engineering Materials, v
487, p 238
-
242, 2011, Advances in Grinding and Abrasive Techn
ology XVI


72.Digital lensless fourier holography with optical fiber and reduction of speckle noise

Ma, Xiao (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Chen, Li; Lin, Qinghua; Xu, Huanku
n; Lei, Sha; Liu,
Feng Source: Advanced Materials Research, v 317
-
319, p 2152
-
2156, 2011, Equipment
Manufacturing Technology and Automation


73.Research on kinematics simulation and analysis of 6 revolute joint serial industrial robot

Li, Ke (Mechatroni
cs Faculty, Guangdong University of Technology, Guangzhou, 510006, China);
Li, Duanneng; Kong, Linglin Source: Advanced Materials Research, v 308
-
310, p 2074
-
2077,
2011, Advanced Design Technology


74.Product's optimum design based on the combination of

reverse engineering and finite element
analysis

Li, Suyang (Faculty of Electro
-
mechanical Engineering, Guangdong University of Technology,
Guangzhou, China); Cheng, Siyuan; Qiu, Canhua Source: Key Engineering Materials, v 467
-
469,
p 335
-
338, 2011, Mate
rials, Mechatronics and Automation


75.A fast detection and compensation of microscope defocus method based on laser triangulation
method on TFT
-
LCD inspection

Fan, Fuming (Faculty of Automation, Guangdong University of Technology, Guangzhou,
Guangdong 510
006, China); Cheng, Lianglun Source: Zhongguo Jiguang/Chinese Journal of
Lasers, v 38, n 2, February 2011



76.Formation and magnetic properties of CuTiZrCo bulk metallic glass

Qiu, Jun
-
Hua (Faculty of Materials and Energy, Guangdong University of Techno
logy, Guangzhou
510006, China); Chen, Xian
-
Chao; Li, Wen
-
Tao; Su, Jia
-
Jia; Xie, Zhi
-
Wei; Yang, Yuan
-
Zheng
Source: Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, v 21, n 2, p
399
-
404, February 2011


77.Preparation and process optimizat
ion of LLDPE/EVA/modified nano
-
ZnO composites

Liu, Jia (Faculty of Materials and Energ, Guangdong University of Technology, 729 East
Dongfeng Road, Guangzhou, 510006, China); Li, Shun Xiang Source: Advanced Materials
Research, v 236
-
238, p 1803
-
1806, 201
1, Application of Chemical Engineering


78.Module partition and application for Printed Circuit Board high speed drilling machine

Tang, H.Q. (Guangdong University of Technology, Guangzhou, China); Wang, C.Y.; Wang, B.; Su,
F.; Ma, P.; Song, Y.X. Source: A
dvanced Materials Research, v 188, p 104
-
109, 2011, High
Speed Machining


79.Research on optimal operations of distribution system with accommodation water discharge of
small hydropower station and capacitor
-
switching

Peng, Xian
-
Gang (Department of Auto
mation, Guangdong University of Technology, Guangzhou
510006, China); Zhang, Cong
-
Hui; Wang, Xing
-
Hua; Liu, Yi; Yu, Xin
-
Mei Source: Dianli Xitong
Baohu yu Kongzhi/Power System Protection and Control, v 39, n 4, p 58
-
61+67, February 16,
2011


80.The behav
ior and removal method of phosphorus in constructed wetland

Luo, Jianzhong (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Wen, Zhuang; Xiong, Guoxiang; Luo, Shuai Source:
2011 International
Conference on Electric Technology and Civil Engineering, ICETCE 2011
-

Proceedings, p 1658
-
1661, 2011, 2011 International Conference on Electric Technology and
Civil Engineering, ICETCE 2011
-

Proceedings


81.An ensemble data mining and FLANN combining s
hort
-
term load forecasting system for
abnormal days

Li, Ming (College of Automation, Guangdong University of Technology, Guangzhou, China); Gao,
Junli Source: Journal of Software, v 6, n 6, p 961
-
968, June 2011


82.Determination of metals in waste bag fi
lter of steel works by microwave digestion
-
flame
atomic absorption spectrometry

Ning, Xun
-
An (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Zhou, Yun; Liu, Jing
-
Yong; Wang, Jiang
-
Hui; Li, Le
i;
Ma, Xiao
-
Guo Source: Guang Pu Xue Yu Guang Pu Fen Xi/Spectroscopy and Spectral Analysis,
v 31, n 9, p 2565
-
2568, September 2011


83.Simulation of spindle rotation error with three
-
point method based on Matlab

Huang, Zouya (Guangdong University of Tech
nology, Guangzhou, Guangdong, 510006, China);
Gao, Weiqiang; Yan, Qiusheng; Huang, Jianjian; Qing, Chaoting Source: Advanced Materials
Research, v 156
-
157, p 1069
-
1073, 2011, Advanced Manufacturing Technology


84.Numerical simulation of air flow propert
ies around high speed train in very Long Tunnel

Zhu, Yanfeng (Guangdong University of Technology, Guangzhou, China); Liu, Xiangyun; Cui,
Zhanlin Source: Journal of Computers, v 6, n 3, p 578
-
584, 2011


85.An effective method for improving the lifetime of

double acting vane pump

Chen, Feiyan (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, 510006, China); Hu, Guoqing; Wu, Baihai Source: Proceedings
-

3rd International
Conference on Measuring Technology and Mechatron
ics Automation, ICMTMA 2011, v 1, p
391
-
394, 2011, Proceedings
-

3rd International Conference on Measuring Technology and
Mechatronics Automation, ICMTMA 2011


86.Influence of plasma modification conditions on hydrophilicity and surface energy of
PEGDA/
HEMA hydrogel

Tan, Guoxin (College of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou 510006, China); Chen, Rong; Ning, Chengyun; Zheng, Huade; Tian, Ye;
Ruan, Xiongjie; Liao, Jingwen Source: Gaofenzi Cailiao Kexue Yu

Gongcheng/Polymeric
Materials Science and Engineering, v 27, n 3, p 55
-
57, March 2011


87.Finite element analysis and calculation of load capacity on aerostatic thrust bearing

Shu, P.C. (Faculty of Electromechanical Engineering, Guangdong University of
Technology,
Guangzhou, China); Xiao, S.H.; Wu, H. Source: Advanced Materials Research, v 188, p 566
-
571,
2011, High Speed Machining


88.Synthesis and characterizaion of adamantane
-
containing quaternary ammonium salts

Guo, Jianwei (Faculty of Chemical En
gineering and Light Industry, Guangdong University of
Technology, Guangzhou, 510006, China); Guan, Nianyun; Liu, Sa; Yang, Chufen; Zhu, Lejie
Source: Advanced Materials Research, v 233
-
235, p 238
-
241, 2011, Fundamental of
Chemical Engineering


89.The in
fluence of stirring time on mechanical properties of Sn
-
58Bi alloy treated in the
semi
-
solid state by mechanical stirring process

Hu, Yongjun (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou
510006, China); Lin, Yong; He, Jian
nan; Cheng, Xiaoling; Lin, Feng; Xiao, Xiaoting; He,
Yuanchuan; Zhong, Binqiang; Zheng, Chuchun; Zheng, Yu Chuan; Wu, Yuchi Source: Key
Engineering Materials, v 480
-
481, p 1521
-
1524, 2011, Materials Engineering for Advanced
Technologies


90.Catalytic co
mbustion of toluene on Pd
-
based monolithic catalyst without coating

Li, Yong
-
Feng (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou 510006, China); Liu, Zu
-
Chao; Mai, Rong
-
Jian; Yu, Lin; Yu, Qian Source:
Ran
liao Huaxue Xuebao/Journal of Fuel Chemistry and Technology, v 39, n 9, p 712
-
716,
September 2011


91.Tongue
-
coating image segmentation based on combination of morphological gradient and
watershed algorithms

Zhang, L. (Computer Faculty, Guangdong Univers
ity of Technology, Guangzhou 510006, China);
Qin, J.; Zeng, Yan Jun Source: Imaging Science Journal, v 59, n 6, p 311
-
316, November 2011


92.Modeling and simulation of hydraulic system of the beam part of the tile press based on
AMESim

Xiao, Tibing (Dept
. of Mechanical and Electronic Eng, Guangdong University of Technology,
Guangzhou, China); Jiang, Xingping; Ling, Ling; Wu, Baihai Source: Proceedings of 2011
International Conference on Fluid Power and Mechatronics, FPM 2011, p 593
-
596, 2011,
Proceeding
s of 2011 International Conference on Fluid Power and Mechatronics, FPM 2011


93.Crystal structure and photoluminescence studies of ZnO nanocrystals doped with
Eu<sup>3+</sup> ions

Huang, Fang
-
Ying (School of Physics and Optoelectronic Engineering, Guangdo
ng University of
Technology, Guangzhou 510006, China); Luo, Li; Dai, Qiang
-
Qin Source: Guang Pu Xue Yu
Guang Pu Fen Xi/Spectroscopy and Spectral Analysis, v 31, n 11, p 2978
-
2980, November
2011


94.PSS parameter tuning based on phase characteristics of s
ite measurements

Mao, Xiaoming (Faculty of Automation, Guangdong University of Technology, Guangzhou
510006, China); Cai, Yongzhi; Zhao, Yong Source: Dianli Zidonghua Shebei/Electric Power
Automation Equipment, v 31, n 10, p 56
-
60, October 2011


95.A lig
htweight solution to educational log data mining

Liu, Kun (Faculty of Automation, Guangdong University of Technology, Guangzhou 510006,
China); Xing, Yan; Cai, Yan
-
Guang Source: Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal
of Central South University (S
cience and Technology), v 42, n SUPPL. 1, p 755
-
759,
September 2011


96.Heat dissipation composites prepared by carbon coated aluminum nanoparticles filled silicone
rubber

Lin, Jin (Faculty of Materials and Energy, Guangdong University of Technology, Gua
ngzhou
510006, China); Zhang, Haiyan; Hong, Haoqun; Tu, Wenying Source: Fuhe Cailiao Xuebao/Acta
Materiae Compositae Sinica, v 28, n 4, p 46
-
51, August 2011


97.Numerical simulation &amp; experimental research of heat charging process of cylindrical
unit
s with PCM of Al
-
Si alloy

Chen, Guansheng (Faculty of Material and Energy, Guangdong University of Technology,
Guangzhou, China); Zhang, Renyuan; Li, Feng; Li, Shidong; Zhang, Li Source: Advanced
Materials Research, v 171
-
172, p 223
-
228, 2011, Engineeri
ng Materials, Energy,
Management and Control


98.The use of ant colony model in the staff deployment problem

Zhang, Wan
-
Li (College of Management, Guangdong University of Technology, Guangdong
510520, China); Zhang, Bi
-
Xi; Qiu, Wen
-
Rong Source: Advanced Ma
terials Research, v
317
-
319, p 1501
-
1506, 2011, Equipment Manufacturing Technology and Automation


99.Influence of annealing temperature on the antibacterial activities and photoactivity of N
-
doped
TiO<inf>2</inf> films by ion beam assistance

Cheng, Xia
o Ling (Faculty of Chemical Engineering and Light Industry, Guangzhou Higher
Education Mega Center, Guangdong University of Technology, No. 100, Wai Huan West Road,
Pan Yu District, Guang Zhou, 510006, China); Hu, Yong Jun; Hu, She Jun; Yu, Lin; Xie, Guang

Rong Source: Advanced Materials Research, v 189
-
193, p 1258
-
1262, 2011, Manufacturing
Process Technology


100.Transverse ferromagnetic resonance of heisenberg ferromagnets with exchange anisotropy

Xiang, Ying (School of Information Engineering, Guangdo
ng University of Technology,
Guangzhou 510006, China); Feng, Jun
-
Sheng; Luo, Xin; Chen, Yuan Source: IEEE Transactions
on Magnetics, v 47, n 6 PART 2, p 1653
-
1657, June 2011


101.Preparation and electrochemical performance of SnO<inf>2</inf>/graphite/ ca
rbon nanotube
composite anode for lithium
-
ion batteries

Yang, Chengzhao (Faculty of Material and Energy, Guangdong University of Technology,
Guangzhou, 510006, China); Zhang, Guoqing; Zhang, Lei; Ma, Li Source: Advanced Materials
Research, v 150
-
151, p 13
87
-
1390, 2011, Advances in Composites


102.Experimental investigation on themal responsive characteristics and shift operation of heat
pump

Chen, Ying (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou
510006, China); Ding, Gu
angcheng; Yang, Min Source: Taiyangneng Xuebao/Acta Energiae
Solaris Sinica, v 32, n 2, p 257
-
261, February 2011


103.Locally linear embedding: A survey

Chen, Jing (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Gua
ngzhou 510006, China); Liu, Yang Source: Artificial Intelligence Review, v 36,
n 1, p 29
-
48, June 2011


104.The setting method of project buffer in critical chain management of mould manufacturing
project based reworking

Hu, Changwei (Key Laboratory of C
omputer Integrated Manufacturing System of Guangdong
Province, Faculty of Electromechanical Engineering, Guangdong University of Technology, No.
100 Waihuanxi Road, Panyu District, Guangzhou 510006, China); Chen, Xindu; Wu, Lihua
Source: Advanced Materials

Research, v 317
-
319, p 418
-
422, 2011, Equipment
Manufacturing Technology and Automation


105.The consumption and control of the real estate market based on dissipation structure theory

Wei
-
Ji, Zhou (School of Management, Guangdong University of Technol
ogy, Guangzhou, China);
Jing
-
Xian, Liu; Xue
-
Qiang, Li; Yang, Liu Source: 2011 International Conference on E
-
Business
and E
-
Government, ICEE2011
-

Proceedings, p 3609
-
3612, 2011, 2011 International
Conference on E
-
Business and E
-
Government, ICEE2011
-

Pro
ceedings


106.Optimal design of spatial grid structure using group search optimization

Yuan, Bing (Faculty of Civil and Transportation Engineering, Guangdong University of
Technology, Da Xue Cheng, Guangzhou, 510006, China); Ren, Fengming; Zhong, Genquan;
Zhou,
Jing Source: Advanced Materials Research, v 243
-
249, p 6044
-
6048, 2011, Advances in
Civil Engineering and Architecture


107.Reliability prediction of wireless sensor network based on neural network

Sun, Xuan Dong (Faculty of Computer, Guangdong Un
iversity of Technology, Guangdong,
510006, China); Wang, Xiao Jing Source: Advanced Materials Research, v 214, p 618
-
622,
2011, Advances in Key Engineering Materials


108.Microstructure and phase stability of sintered hydroxyapatite
-
zirconia composites

Cheng, Xiao Ling (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, No. 100, Wai Huan West Road, Guang Zhou, 510006, China); Hu, Yong Jun; Bai,
Xiao Jun; Yu, Lin; Chen, Jun Sheng; Lin, Le Jia Source: Advanced Materials

Research, v
236
-
238, p 2848
-
2851, 2011, Application of Chemical Engineering


109.FPGA implementation of Laplacian of Gaussian edge detection algorithm

Wang, Feng (Faculty of Information Engineering, Guangdong University of Technology,
Guangzhou 510006,

China); Wang, Gui Tang; Wang, Rui Huang; Huang, Xiao Wu Source:
Advanced Materials Research, v 282
-
283, p 157
-
160, 2011, Advanced Research on Material
Engineering, Chemistry, Bioinformatics, MECB 2011


110.Reactive scheduling algorithm for multiple mou
ld and die projects based on optimized
resource ow constraints

Zhang, Sha
-
Qing (School of Electromechanical Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Chen, Xin
-
Du; Chen, Qing
-
Xin; Chen, Xin Source:
Xitong Gongcheng Lilun yu

Shijian/System Engineering Theory and Practice, v 31, n 8, p
1571
-
1580, August 2011


111.Interaction behavior modeling of advanced driving assistance systems by using Petri net

Wu, Naiqi (School of Mechatronics Engineering, Guangdong University of Techn
ology,
Guangzhou 510006, China); Chu, Feng; Mammar, Said; Zhou, Mengchu Source: 2011
International Conference on Networking, Sensing and Control, ICNSC 2011, p 145
-
150, 2011,
2011 International Conference on Networking, Sensing and Control, ICNSC 2011


1
12.Effect of Ni<sup>2+</sup> on chromium electrodeposition in Cr(III) plating bath

He, Xiangzhu (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guangzhou, Guangdong, 510006, China); Zhou, Xinli; Zhang, Xiaowei Sourc
e:
Advanced Materials Research, v 150
-
151, p 1555
-
1559, 2011, Advances in Composites


113.The influence of process parameters on the branch height for air handling unit

Wen, Hua
-
Dian (Faculty of Material and Energy, Guangdong University of Technology,
G
uangzhou 510006, China); Xiao, Xiao
-
Ting; Tan, Li
-
Guang; Zhang, Kai; Chen, Ying Source:
Advanced Materials Research, v 314
-
316, p 759
-
762, 2011, Advanced Manufacturing
Technology


114.Election Campaign Optimization algorithm for design of pressure vesse
l

Zhang, Hong (Faculty of Electromechanical Engineering, Guangdong University of Technology,
China); Lv, Wenge; Cheng, Siyuan; Luo, Shaoming; Zhang, Xiangwei Source: Advanced
Materials Research, v 308
-
310, p 15
-
20, 2011, Advanced Design Technology


115.
Condition evaluation of existing long
-
span bridges using fuzzy based analytic hierarchy
process

Deng, Jun (Facculty of Civil and Transportation Engineering, Guangdong University of
Technology, Guangzhou, 510006, China); Li, Jian; Fang, Xiaoyue Source: Adva
nced Materials
Research, v 163
-
167, p 3328
-
3331, 2011, Advances in Structures


116.Simulation on influence mechanism of environmental factors to producers' food security
behavior in supply chain

Chen, Yuan (School of Economics and Commerce, Guangdong Un
iversity of Technology,
Guangzhou, 510520, China); Chen, Kanyu; Li, Yang Source: Proceedings
-

2011 8th International
Conference on Fuzzy Systems and Knowledge Discovery, FSKD 2011, v 4, p 2104
-
2109, 2011,
Proceedings
-

2011 8th International Conference

on Fuzzy Systems and Knowledge Discovery,
FSKD 2011


117.Application of vibration test methods in cement
-
treated aggregate

Liu, Jia (Faculty of Civil and Traffic Engineering, Guangdong University of Technology,
Guangzhou, Guangdong, 510006, China); Zhang,

Ronghui; Mai, Canqiang Source: Advanced
Materials Research, v 308
-
310, p 980
-
986, 2011, Advanced Design Technology


118.Synthesis and characterization of Se nanowires

Zhao, Miao (Faculty of Physics and Optoelectronic Engineering, Guangdong University o
f
Technology, Guangzhou 510006, China); Yi, Shuang
-
Ping; Wang, Zhen
-
Hu Source: Gongneng
Cailiao/Journal of Functional Materials, v 42, n SUPPL. 1, p 54
-
57, February 2011


119.A novel design of 3
-
dB coupler with harmonics suppression using Powell's least
square
method

Li, Rui (Faculty of Physics and Optoelectronic Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Kim, Dong Il; Wu, Duo
-
Long; Yang, Qiang Source: Microwave and
Optical Technology Letters, v 53, n 9, p 2164
-
2166, Sept
ember 2011


120.Pinning effects on the dielectric and ferroelectric properties of Mn
-
doped
Ba(Zr<inf>0.06</inf>Ti<inf>0.94</inf>)O<inf>3</inf> ceramics

Kuang, S.J. (School of Physics and Optoelectric Engineering, Guangzhou Higher Education Mega
Center, Gua
ngdong University of Technology, Guangzhou, 510006, China); Tang, X.G.; Wu, J.B.;
Jiang, Y.P.; Liu, Q.X. Source: Materials Science Forum, v 687, p 354
-
358, 2011, Functional
and Electronic Materials


121.Photoluminescence characterization of Ca<inf>10</i
nf>Na(PO
<inf>4</inf>)<inf>7</inf>:Eu<sup>3+</sup> red
-
emitting phosphor

Dou, Xihua (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, GuangDong, Guangzhou 510006, China); Zhao, Weiren; Song, Enhai; Zhou,
Guoxiong; Yi, C
hunyu; Zhou, Mingkang Source: Spectrochimica Acta
-

Part A: Molecular and
Biomolecular Spectroscopy, v 78, n 2, p 821
-
825, February 2011


122.Study on machining process of lapping for BK7 glass

Wang, C.Y. (Faculty of Electromechanical Engineering, Guangd
ong University of Technology,
China); Luo, W.S.; He, C.H.; Song, Y.X. Source: Key Engineering Materials, v 487, p 257
-
262,
2011, Advances in Grinding and Abrasive Technology XVI


123.A lasso
-
based method for wavelet network construction

Zhang, Jun (Coll
ege of Information Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Wan, Xiangkui Source: Journal of Information and Computational
Science, v 8, n 9, p 1755
-
1760, September 2011


124.Preliminary study on prediction model of form
ing tubular bulge height for a thick
-
plate

Liu, Dan (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou,
Guangdong, 510006, China); Xiao, Xiaoting; Liao, Yijuan; Zhang, Zhengrong Source: Advanced
Materials Research, v 314
-
316, p

763
-
766, 2011, Advanced Manufacturing Technology


125.Approaches to the feather stain detection and segmentation

Ming, Junfeng (Faculty of Computer, Guangdong University of Technology, Guangzhou,
Guangdong, China); Wang, Renhuang; Tang, Suxiang; Liu, Ho
ngjiang Source: Advanced
Materials Research, v 317
-
319, p 931
-
936, 2011, Equipment Manufacturing Technology and
Automation


126.A two
-
level theoretical model on digital divide in individual ecommerce utilization in China

Zhu, Shizhan (School of Managem
ent, Guangdong University of Technology, Guangzhou
510520, China) Source: 2011 IEEE 3rd International Conference on Communication Software and
Networks, ICCSN 2011, p 92
-
96, 2011, 2011 IEEE 3rd International Conference on
Communication Software and Netwo
rks, ICCSN 2011


127.Design of control and display system of infrared cooker based on TMP86FH09ANG and
CY8C21534

Wang, Yonghua (Faculty of Automation, Guangdong University of Technology, Guangzhou,
510006, China); Du, Jianhong; Yang, Jian Source: Advanced
Materials Research, v 216, p 61
-
64,
2011, Optical, Electronic Materials and Applications


128.Generation of excellent self
-
similar pulses in a dispersion
-
decreasing fiber

Zhang, Qiaofen (Guangdong University of Technology, Guangzhou, Guangdong 510006, C
hina);
Gao, Jian Source: Optik, v 122, n 19, p 1753
-
1756, October 2011


129.Experimental study on solidification behavior of carbon nanotube nanofluid

Mo, Songping (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou, China); C
hen, Ying; Yang, Jieying; Luo, Xianglong Source: Advanced Materials
Research, v 171
-
172, p 333
-
336, 2011, Engineering Materials, Energy, Management and
Control


130.Linear quadratic Gaussian optiaml controlled two
-
stage inverter for a high
-
frequency AC
distribution power system

Liu, Wei (Guangdong University of Technology, Guangzhou, 510006, China); Huang, Zhigang;
Guo, Zhongning Source: Advanced Materials Research, v 230
-
232, p 1287
-
1292, 2011,
Frontiers of Manufacturing Science and Measuring Technol
ogy


131.Saddle
-
point equilibrium of bilinear It&#244; stochastic differential games

Gao, Xiaoqiu (Guangdong University of Technology, Guangzhou, Guangdong 510520, China);
Zhang, Chengke; Zhu, Huainian Source: Communications in Computer and Information Sci
ence,
v 227 CCIS, n PART 4, p 368
-
373, 2011, Applied Informatics and Communication
-

International Conference, ICAIC 2011, Proceedings


132.Source and destination antenna selection in MIMO relay systems

Zhang, Guangchi (Faculty of Information Engineerin
g, Guangdong University of Technology,
Guangzhou 510006, China); Li, Guangping; Qin, Jiayin Source: 7th International Conference on
Wireless Communications, Networking and Mobile Computing, WiCOM 2011, 2011, 7th
International Conference on Wireless Commu
nications, Networking and Mobile Computing,
WiCOM 2011


133.License plate location based on combinatorial feature

Zheng, Yan
-
Qing (Faculty of Computer, Guangdong University of Technology, Guangzhou,
China); Li, Dai
-
Ping; Zhang, Shu
-
Wen Source: 7th Internat
ional Conference on Wireless
Communications, Networking and Mobile Computing, WiCOM 2011, 2011, 7th International
Conference on Wireless Communications, Networking and Mobile Computing, WiCOM 2011


134.Long
-
term capacity planning with multi
-
process routi
ng for mould enterprise

Yu, A.L. (School of Mechanical and Electronic Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Chen, Q.X. Source: Proceedings of the 2011 2nd International
Conference on Digital Manufacturing and Automation
, ICDMA 2011, p 705
-
709, 2011,
Proceedings of the 2011 2nd International Conference on Digital Manufacturing and Automation,
ICDMA 2011


135.Application of Kalman filter with colored noises to the experiment of seam tracking

Gao, Xiang
-
Dong (Faculty of M
echanical and Electrical Engineering, Guangdong University of
Technology, Guangzhou Guangdong 510006, China); Zhong, Xun
-
Gao; You, De
-
Yong; Katayama,
Seiji Source: Kongzhi Lilun Yu Yingyong/Control Theory and Applications, v 28, n 7, p 931
-
935,
July 2011


136.Fault diagnosis technology for power electronics rectifier based on wavelet packet

Hu, Qing (School of Information Engineering, GuangDong University of Technology, Guangzhou,
Guangdong, 510006, China); Wang, Rongjie; Lin, Lian
-
Shi Source: Advanced Ma
terials Research,
v 317
-
319, p 1215
-
1218, 2011, Equipment Manufacturing Technology and Automation


137.Spatter feature recognition during high
-
power disk laser welding

You, Deyong (Faculty of Electromechanical Engineering, Guangdong University of Techno
logy,
Higher Education Mega Center, No. 100 West Waihuan Road, Panyu District, Guangzhou 510006,
China); Gao, Xiangdong; Katayama, Seiji Source: Advanced Materials Research, v 314
-
316, p
937
-
940, 2011, Advanced Manufacturing Technology


138.Review of te
chniques for the mass flow rate measurement of pneumatically conveyed solids

Zheng, Yingna (School of Information Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Liu, Qiang Source: Measurement: Journal of the International
Measur
ement Confederation, v 44, n 4, p 589
-
604, May 2011


139.Study of adsorbent derived from sewage sludge incineration residue for the removal of
Ni<sup>2+</sup> in wastewater

Liu, Jing Yong (Faculty of Environmental Science and Engineering, Guangdong Unive
rsity of
Technology, Guangdong Guangzhou,510006, China); Ning, Xun An; Yang, Zuo Yi Source: Key
Engineering Materials, v 474
-
476, p 158
-
161, 2011, Advanced Materials and Computer
Science


140.Research on the evaluation and countermeasure to the situatio
n of Dongguan's coordinating
development economy

Hongling, Lin (School of Management, Guangdong University of Technology, Chaozhou,
Guangdong, China); Haijiao, He; Zhifeng, He Source: 2011 International Conference on
E
-
Business and E
-
Government, ICEE2011
-

Proceedings, p 3459
-
3463, 2011, 2011
International Conference on E
-
Business and E
-
Government, ICEE2011
-

Proceedings


141.Catalytic combustion of toluene on Cu
-
Mn complex oxides prepared by urea
-
based
hydrothermal method

Yu, Qian (Faculty of Chemical En
gineering and Light Industry, Guangdong University of
Technology, Guangzhou, Guangdong, 510006, China); Li, Jun; Cheng, Gao; Shen, Lisi; Wang,
Yunjia; Yu, Lin; Li, Yongfeng Source: Advanced Materials Research, v 311
-
313, p 432
-
435,
2011, Advanced Materi
als and Processes


142.Experimental study on the solar
-
earth source heat pump system and its underground heat
exchanger system

Wang, Chengyong (Faculty of Electromechanical Engineering, Guangdong University of
Technology, Guangzhou 510090, China); Chen, Bi
ngwen; Chen, Wenming; Wang, Yansheng; Hu,
Yingning Source: Taiyangneng Xuebao/Acta Energiae Solaris Sinica, v 32, n 1, p 77
-
82,
January 2011


143.Effect of complex agents on the performance of electrodeposited Ni
-
graphite composites

He, Xiang Zhu (Facult
y of chemical Engineering and Light Industry, Guangdong University of
Technology, No. 100 Waihuan Xi Road, Guangzhou, Guangdong, 510006, China); Zhang, Xiao
Wei; Zhou, Xin Li; Wang, Yong Xiu Source: Advanced Materials Research, v 239
-
242, p
2888
-
2894, 20
11, Advanced Materials


144.Photoluminescence and thermoluminescence of Ce<sup>3</sup> and Eu <sup>2</sup> in
Ca<inf>2</inf>Al<inf>2</inf>SiO<inf>7</inf> matrix

Wu, Haoyi (School of Physics and Optoelectronic Engineering, Guangdong University of
Technolog
y, Guangzhou 510006, China); Hu, Yihua; Ju, Guifang; Chen, Li; Wang, Xiaojuan;
Yang, Zhongfu Source: Journal of Luminescence, v 131, n 12, p 2441
-
2445, December 2011


145.Ductility of concrete
-
filled steel box columns with binding bars subjected to axial

compression

Long, Yue
-
Ling (Department of Civil Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Cai, Jian Source: Advanced Materials Research, v 255
-
260, p
2584
-
2587, 2011, Advances in Civil Engineering


146.Non
-
isothermal cr
ystallization behavior in Zr<inf>55</inf>Cu
<inf>30</inf>Ni<inf>5</inf>Al<inf>10</inf> bulk metallic glass

Tao, Pingjun (Faculty of Materials and Energy, Guangdong University of Technology, Guangzhou,
China); Yang, Yuanzheng; Bai, Xiaojun; Mu, Zhongxin; Li
, Guoqing Source: Advanced Materials
Research, v 146
-
147, p 560
-
564, 2011, Advances in Superalloys


147.Preparation and characterization of APTES films on modification titanium by SAMs

Tan, Guoxin (Institute of Chemical Engineering and Light Industry, G
uangdong University of
Technology, Guangzhou, 510006, China); Zhang, Lin; Ning, Chengyun; Liu, Xujian; Liao,
Jingwen Source: Thin Solid Films, v 519, n 15, p 4997
-
5001, May 31, 2011


148.ESPI for the piezoelectric constant measurement

Xu, Huankun (School

of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou, 510006, China); Chen, Li; Ma, Beihe; Ma, Xiao; Lei, Sha; Lin, Qinghua
Source: Advanced Materials Research, v 311
-
313, p 1314
-
1318, 2011, Advanced Materials
and Pr
ocesses


149.Corroded behavior of 310S stainless steel in molten Al
-
Si eutectic alloy

Mao, Ling Bo (Faculty of Material and Energy, Guangdong University of Technology, Guangzhou,
Guangdong 510090, China); Zhang, Ren Yuan; Li, Feng Source: Advanced Material
s Research,
v 311
-
313, p 957
-
961, 2011, Advanced Materials and Processes


150.Energy recovery and recycle network optimization considering energy load variation for large
public buildings

Chen, Ying (School of Material and Energy, Guangdong University o
f Technology, Guangzhou,
510006, China); Lv, Feng; Luo, Xianglong Source: Proceedings
-

International Conference on
Computer Distributed Control and Intelligent Environmental Monitoring, CDCIEM 2011, p
194
-
197, 2011, Proceedings
-

International Conferenc
e on Computer Distributed Control and
Intelligent Environmental Monitoring, CDCIEM 2011


151.A novel service scheduling policy based on logical subnet partitioning in Bio
-
Grid
environments

Jiang, Wenchao (School of Information Engineering, Guangdong Univer
sity of Technology,
Guangzhou 510006, China); Zhou, Yanhong; Jin, Hai; Baumgarten, Matthias Source: International
Journal of Grid and Utility Computing, v 2, n 2, p 85
-
97, June 2011


152.Analyses of pathological changes of Lingnan ancient stone bridges

L
i, Xuhong (School of Art and Design, Guangdong University of Technology, Guangdong
510090, China) Source: Advanced Materials Research, v 168
-
170, p 99
-
105, 2011, Advances
in Building Materials


153.Modal analysis of externally pressurized air bearing w
orkbench based on spring
-
mass system
method

Zhang, B. (Guangdong University of Technology, Guangzhou, Guangdong, China); Ma, P.; Huang,
J.J. Source: Advanced Materials Research, v 188, p 602
-
607, 2011, High Speed Machining


154.Friction and wear propert
ies of W,Mo,Co alloyed layer on T8 steel by double
-
glow technique

Zhang, Yan Mei (Faculty of Materials and Energy, Guangdong University of Technology, No.100,
Wai Huan West Road, Guang Zhou, 510006, China); Jie, Xiao Hua; Li, Zhong Hou; Xu, Zhong
Source: A
dvanced Materials Research, v 189
-
193, p 1071
-
1074, 2011, Manufacturing
Process Technology


155.The comparative analysis about rotational error separation with three
-
point method and
approximate three
-
point method

Ping, Ma (Guangdong University of Techn
ology, Guangzhou 510006, China); JianJian, Huang;
DuanNeng, Li Source: 2011 International Conference on Consumer Electronics, Communications
and Networks, CECNet 2011
-

Proceedings, p 5530
-
5534, 2011, 2011 International
Conference on Consumer Electronics
, Communications and Networks, CECNet 2011
-

Proceedings


156.The characteristics of chitosan applied in drinking water treatment

Li, Shaoxiu (Faculty of Civil and Transportation Engineering, Guangdong University of
Technology, Guangzhou, Guangdong, 510006
, China); Hu, Shujie; Li, Dongmei; Duan, Weiwei;
Xia, Wenqin; Zheng, Zhijia Source: Advanced Materials Research, v 233
-
235, p 638
-
643,
2011, Fundamental of Chemical Engineering


157.Improved grid synchronization control of doubly fed induction generator

under unbalanced
grid voltage

Chen, Si Zhe (Faculty of Automation, Guangdong University of Technology, Guangzhou 510006,
China); Cheung, Norbert C.; Zhang, Yun; Zhang, Miao; Tang, Xiong Min Source: IEEE
Transactions on Energy Conversion, v 26, n 3, p 799
-
810, September 2011


158.Preparation and properties of PA66/PP/MOS whisker composites

Peng, Jian (Faculty of Materials and Energy, Guangdong University of Technology, Guangzhou,
510006, China); Cao, Youming Source: Advanced Materials Research, v 311
-
313
, p 20
-
25,
2011, Advanced Materials and Processes


159.Study on properties and preparation of thermoplastic polyurethane hot
-
melt adhesive

Tian, Junling (Faculty of Materials and Energy, Guangdong University of Technology, Guangzhou
510006, China); Cao,
Youming; Zhou, Xinqi Source: Advanced Materials Research, v 311
-
313,
p 1071
-
1076, 2011, Advanced Materials and Processes


160.An improved pedestrian detection method based on adaboost and performance analysis

Zhang, Yanxi (Guangzhou Higher Education Meg
a Center, Guangdong University of Technology,
No. 100 Waihuan Xi Road, Panyu District, Guangzhou, China); Gao, Xiangdong Source:
Advanced Materials Research, v 317
-
319, p 877
-
880, 2011, Equipment Manufacturing
Technology and Automation


161.Effects of t
ool rake angle on the curved radius during planing
-
forming process of fine heat
sink

Wei, Liang (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou, China); Zhao
-
Qin, Y.U.; Zhang, Le
-
Le; Zhang, Yongjun Source: Advanced
Materials
Research, v 317
-
319, p 370
-
373, 2011, Equipment Manufacturing Technology and
Automation


162.Design and implementation of an attendance system for engineering training based on DSBA

Meilin, Wang (Faculty of Information Engineering, Guangdong U
niversity of Technology,
Guangzhou 510006, Guangdong, China); Pinxin, Fu; Qingyun, Dai; Runyang, Zhong Source:
Communications in Computer and Information Science, v 235 CCIS, n PART 5, p 181
-
188,
2011, Information and Management Engineering
-

Internatio
nal Conference, ICCIC 2011,
Proceedings


163.Monitoring of drill process and prediction for remaining useful life of drill tool

Ao, Yinhui (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510090, China); Wang, Baoshe
ng Source: Jixie Gongcheng Xuebao/Journal of
Mechanical Engineering, v 47, n 1, p 177
-
181, January 5, 2011


164.The study of the preparation of linolenic acid
-
amylose complexes and their oxidation stability

Lin, Ruohui (Food Science and Bioengineering De
partment, Guangdong University of Technology,
Guangzhou 510006, China); Wu, Kegang; Chai, Xianghua; Zhong, Shaoshu Source: Advanced
Materials Research, v 317
-
319, p 194
-
200, 2011, Equipment Manufacturing Technology and
Automation


165.Grey
-
relation anal
ysis and neural networks model for relationship between
physico
-
mechanical indices and microstructure parameters of soft soils

Liu, Yong
-
Jian (Institute of Geotechnical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Li, Zhang
-
Mi
ng Source: Yantu Lixue/Rock and Soil Mechanics, v
32, n 4, p 1018
-
1024, April 2011


166.Universal approximation properties for fuzzy logic systems based on monoids

Fan, Yongqing (Faculty of Automation, Guangdong University of Technology, Guangzhou, China
);
Wang, Yinhe; Wang, Weichao; Liang, Luo; Yun, Zhang Source: Proceedings
-

2010 International
Conference on Intelligent System Design and Engineering Application, ISDEA 2010, v 2, p
802
-
805, 2011, Proceedings
-

2010 International Conference on Intellig
ent System Design and
Engineering Application, ISDEA 2010


167.SAHRC: A cluster
-
based routing control protocol for wireless sensor network

Zhang, Xiao
-
Bo (Faculty of Automation, Guangdong University of Technology, Guangzhou
510006, China); Cheng, Liang
-
Lun
; Zhu, Quan
-
Min Source: Dianzi Yu Xinxi Xuebao/Journal of
Electronics and Information Technology, v 33, n 8, p 2013
-
2017, August 2011


168.Efficient key management scheme for mobile agent in a hierarchy

Liu, Yi (Faculty of Computer, Guangdong University
of Technology, Guangzhou, 510006, China);
Ding, Yong Source: Proceedings
-

4th International Joint Conference on Computational Sciences
and Optimization, CSO 2011, p 780
-
782, 2011, Proceedings
-

4th International Joint
Conference on Computational Science
s and Optimization, CSO 2011


169.Preparation and photocatalytic activities of visible
-
light
-
driven TiO <inf>2</inf> films
codoped with aluminum and nitrogen

Cheng, Xiaoling (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Techn
ology, Guangzhou, 510006, China); Hu, Shejun; Hu, Yongjun; Lin, Yu; Wei, Zhigang
Source: Advanced Materials Research, v 150
-
151, p 1607
-
1612, 2011, Advances in
Composites


170.Analysis of mechanical performance of crumb rubber concrete by different aggr
egate shape
under uniaxial compression on mesoscopic

Zhong, Genquan (Faculty of Civil and Transportation Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Guo, Yongchang; Li, Juan; Liu, Feng Source: Key
Engineering Materials, v 46
2
-
463, p 219
-
222, 2011, Fracture and Strength of Solids VII


171.Investigation on the enhancement and the suppression of persistent luminescence of
Re<sup>3+</sup> doped Sr<inf>2</inf>EuMgSi<inf>2</inf>O <inf>7</inf> (Re = Dy, Yb)

Wu, Haoyi (School of Ph
ysics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Hu, Yihua; Chen, Li; Wang, Xiaojuan Source: Journal of
Alloys and Compounds, v 509, n 11, p 4304
-
4307, March 17, 2011


172.Investigation on Eu<sup>3</sup>

doped Sr<inf>2</inf>MgSi<inf>2</inf>O <inf>7</inf>
red
-
emitting phosphors for white
-
light
-
emitting diodes

Wu, Haoyi (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Hu, Yihua; Wang, Yinhai; K
ang, Fengwen; Mou,
Zhongfei Source: Optics and Laser Technology, v 43, n 7, p 1104
-
1110, October 2011


173.Thermal performances analysis of microelectronic chip cooling system with thermoelectric
components

Wang, Changhong (Faculty of Materials and Energ
y, Guangdong University of Technology,
Guangzhou, China); Zhang, Jiangyun; Huang, Jin Source: Advanced Materials Research, v 216,
p 128
-
133, 2011, Optical, Electronic Materials and Applications


174.Fast and accurate self
-
localization of mobile robot ba
sed on multi
-
sensor

Zhang, Xue
-
Xi (College of Automation, Guangdong University of Technology, Guangzhou
Guangdong 510090, China); Yang, Yi
-
Min Source: Kongzhi Lilun Yu Yingyong/Control Theory
and Applications, v 28, n 3, p 443
-
448, March 2011


175.Review

on advanced composite materials boring mechanism and tools

Shi, Runping (Guangdong University of Technology, Guangzhou, 510006, China); Wang,
Chengyong Source: Proceedings of SPIE
-

The International Society for Optical Engineering, v
7997, 2011, Fourt
h International Seminar on Modern Cutting and Measurement Engineering


176.Adsorption of phosphorus from Eutrophication water by modified diatomite

Peng, Jinping (Faculty of Chemical Engineering and Light Industry, Guangdong University of
Technology, Guang
zhou 510006, Guangdong, China); Guo, Jianwei; Pang, Chunyang Source:
ICMREE2011
-

Proceedings 2011 International Conference on Materials for Renewable Energy
and Environment, v 2, p 1500
-
1505, 2011, ICMREE2011
-

Proceedings 2011 International
Conference

on Materials for Renewable Energy and Environment


177.Algorithm of infrared gait detection based on chaos ant colony and space
-
time combination

Tan, Jian
-
Hui (Faculty of Automation, Guangdong University of Technology, Guangzhou, China);
Pan, Bao
-
Chang So
urce: Proceedings of the 2011 6th IEEE Conference on Industrial Electronics
and Applications, ICIEA 2011, p 1736
-
1741, 2011, Proceedings of the 2011 6th IEEE
Conference on Industrial Electronics and Applications, ICIEA 2011


178.Luminescence investigatio
n of
Na<inf>z</inf>Ca<inf>1
-
x
-
2y
-
z</inf>Bi<inf>y</inf>MoO<inf>4</inf>:
Eu<inf>x+y</inf><sup>3+</sup> red phosphors

Kang, Feng
-
Wen (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Hu, Yi
-
Hua; W
ang, Yin
-
Hai; Wu, Hao
-
Yi; Mu,
Zhong
-
Fei; Ju, Gui
-
Fang; Fu, Chu
-
Jun Source: Guang Pu Xue Yu Guang Pu Fen Xi/Spectroscopy
and Spectral Analysis, v 31, n 9, p 2341
-
2345, September 2011


179.Modified nonlinear morphological correlation using Laplace filterin
g

Wang, Qu (Guangdong University of Technology, School of Physics and Optoelectronic
Engineering, Guangzhou 510006, China); Chen, Li; Zhou, Jinyun; Lei, Liang; Wang, Bo Source:
Optics and Laser Technology, v 43, n 4, p 874
-
881, June 2011


180.Effect of u
ltrasonic disperse on the properties of carbon nanotubes supercapacitors

Yuan, Xinsheng (GuangDong University of Technology, Faculty of Material and Energy,
Guangzhou, Guangdong, 510006, China); Zhang, Haiyan; Chen, Yiming Source: Advanced
Materials Resear
ch, v 148
-
149, p 1417
-
1420, 2011, Manufacturing Processes and Systems



181.On
-
site test study of RC slabs strengthened with CFRP and BFRP

Xu, Xinjian (Guangdong University of Technology, Guangzhou, Guangdong, 510000, China); Li,
Lijuan; Zhou, Wenchao;
Min, Ming; Liu, Feng Source: Advanced Materials Research, v 163
-
167,
p 3782
-
3786, 2011, Advances in Structures


182.Probability distribution analysis of structural response under non
-
Gaussian wind loads

Li, Jing (Faculty of Civil and Transportation Engi
neering, Guangdong University of Technology,
Guangzhou, Guangdong, 510006, China); Wang, Xin Source: Advanced Materials Research, v
163
-
167, p 4356
-
4362, 2011, Advances in Structures


183.Synthesis and field emission of ZnO bundles with high aspect rati
o by solution method

Liu, Jun (Faculty of Materials and Energy, Guangdong University of Technology, No.100 Waihuan
Xi Road, Guang Zhou, 510006, China); Wei, Ai Xiang; Zhang, Hai Yan Source: Advanced
Materials Research, v 194
-
196, p 589
-
593, 2011, Advanc
ed Engineering Materials


184.Electromagnetic characteristics and microwave absorption properties of CNT composite

Zhang, Min (Faculty of Materials and Energy, Guangdong University of Technology, No.100, Wai
Huan Xi Road, Guang Zhou, 510006, China); Zhang,

Hai Yan; Zeng, Guo Xun Source: Advanced
Materials Research, v 194
-
196, p 520
-
523, 2011, Advanced Engineering Materials


185.A red
-
emitting heavy doped phosphor Li<inf>6</inf>Y(BO<inf>3</inf>)
<inf>3</inf>:Eu<sup>3+</sup> for white light
-
emitting diodes

Ju, Guifang (School of Physics and Optoelectronic Engineering, Guangdong University of
Technology, Waihuan Xi Road, No. 100, Guangzhou 510006, China); Hu, Yihua; Wu, Haoyi;
Yang, Zhongfu; Fu, Chujun; Mu, Zhongfei; Kang, Fengwen Source: Optical Materials,

v 33, n 8,
p 1297
-
1301, June 2011


186.Study on synthesis nanomicrostructures of zinc borate (Zn<inf>3</inf>B
<inf>6</inf>O<inf>12</inf>&middot3.5H<inf>2</inf>O) with different morphologies

Ren, Hui (Faculty of Polymer Materials and Engineering, Guangzho
u Higher Education Mega
Center, Guangdong University of Technology, Waihuan Xi Road, Guangzhou, 510006, China);
Cao, You Ming; Lei, Zhou Qiao Source: Advanced Materials Research, v 236
-
238, p 1687
-
1691,
2011, Application of Chemical Engineering


187.Syn
thesis and performance of modified chitin sterilization
-
coagulants

Yuan, Bin (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou, China); Lv, Song; Yin, Guangcai; Zheng, Dingcheng Source: 5th
International Confe
rence on Bioinformatics and Biomedical Engineering, iCBBE 2011, 2011,
5th International Conference on Bioinformatics and Biomedical Engineering, iCBBE 2011


188.Control strategy &amp; calibration of fuel injection impulse width on EFI motorcycle engine

P
eng, Meichun (Electro
-
mechanical Engineering Faculty, Guangdong University of Technology,
Guangzhou, China); Deng, Xubing; Liang, Xiaofeng Source: 2011 International Conference on
Electric Information and Control Engineering, ICEICE 2011
-

Proceedings, p 2
047
-
2053, 2011,
2011 International Conference on Electric Information and Control Engineering, ICEICE 2011
-

Proceedings


189.Weld
-
pool image centroid algorithm for seam
-
tracking vision model in arc
-
welding process

Gao, X. (Faculty of Mechanical and Elec
trical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Ding, D.; Bai, T.; Katayama, S. Source: IET Image Processing, v 5,
n 5, p 410
-
419, August 2011


190.Self
-
learning control of hydraulic injection molding machine based on fu
zzy neural network

Li, Xiao (Faculty of Electromechanical Engineering, Guangdong University of Technology,
Guangzhou 510006, China); Yang, Xiaohua Source: Applied Mechanics and Materials, v 66
-
68,
p 1117
-
1121, 2011, Mechanical, Materials and Manufacturi
ng Engineering


191.The simulation study of the maximum learning incremental worker
-
station assignment based
on learning
-
forgetting

Liu, Huizhen (School of Management, Guangdong University of Technology, Guangzhou, China);
Zhang, Bixi; Hu, Shengqiang; Zhan
g, Yuling; Guan, Shihua Source: 2011 2nd International
Conference on Mechanic Automation and Control Engineering, MACE 2011
-

Proceedings, p
7852
-
7854, 2011, 2011 2nd International Conference on Mechanic Automation and Control
Engineering, MACE 2011
-

Pr
oceedings


192.Analysis of accidental consequence of butadiene tank

Ning, Xunan (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou Guangdong, 510006, China); Zhou, Jianbo; Liu, Jingyong; Yang, Zuoyi;
Zhang, Nin
g Source: Applied Mechanics and Materials, v 71
-
78, p 2243
-
2248, 2011,
Frontiers of Green Building, Materials and Civil Engineering


193.Photocatalytic inactivation of chlorella by TiO<inf>2</inf>/foam nickel

Xiong, Zhongqiong (Faculty of Materials and
Energy, Guangdong University of Technology,
Guangzhou, Guangdong, 5l0006, China); Zhang, Guoqing; Xiong, Liang; Fu, Lipeng; Pan,
Huageng Source: Applied Mechanics and Materials, v 71
-
78, p 2944
-
2947, 2011, Frontiers
of Green Building, Materials and Civi
l Engineering


194.Formal specification for real time cyber physical systems using aspect
-
oriented approach

Zhang, Lichen (Faculty of Computer Science and Technology, Guangdong University of
Technology, Guangzhou 510090, China) Source: Proceedings
-

5th I
nternational Conference on
Theoretical Aspects of Software Engineering, TASE 2011, p 213
-
216, 2011, Proceedings
-

5th
International Conference on Theoretical Aspects of Software Engineering, TASE 2011


195.Aspect
-
oriented MDA development method for non
-
f
unctional properties of cyber physical
systems

Liu, Jingyong (Faculty of Computer Science and Technology, Guangdong University of
Technology, Guangzhou 510090, China); Zhang, Lichen Source: Proceedings
-

2nd International
Conference on Networking and Distr
ibuted Computing, ICNDC 2011, p 149
-
153, 2011,
Proceedings
-

2nd International Conference on Networking and Distributed Computing, ICNDC
2011


196.Direct
-
torque control of the brushless double
-
fed machines based on sliding
-
mode variable
structure control

strategy

Yang, Jun
-
Hua (Faculty of Automation, Guangdong University of Technology, Guangzhou
Guangdong 510006, China); Liu, Yuan
-
Tao; Xie, Jing
-
Feng; Liu, Hui
-
Yuan; Wu, Jie Source:
Kongzhi Lilun Yu Yingyong/Control Theory and Applications, v 28, n 9, p 1
195
-
1201,
September 2011


197.License plate location based on combinatorial feature

Yan
-
Qing, Zheng (Faculty of Computer, Guangdong University of Technology, Guangzhou,
China); Dai
-
Ping, Li; Shu
-
Wen, Zhang Source: 2011 Microwaves, Radar and Remote Sensing

Symposium, MRRS
-
2011
-

Proceedings, p 165
-
168, 2011, 2011 Microwaves, Radar and
Remote Sensing Symposium, MRRS
-
2011
-

Proceedings


198.The bioavailability of the heavy metals in the surface sediment from Pearl River Guangzhou
Section

Lv, Wengying (Facul
ty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Liu, Guoguang Source: 2011 International Conference
on Electrical and Control Engineering, ICECE 2011
-

Proceedings, p 5555
-
5560, 2011, 2011
Intern
ational Conference on Electrical and Control Engineering, ICECE 2011
-

Proceedings


199.Establishment and analysis of auto
-
focus model for laser triangulation method

Fan, Fuming (Faculty of Automation, Guangdong University of Technology, Guangzhou 510006,
China); Cheng, Lianglun; Xiao, Lei; Zhu, Quanmin Source: Hongwai yu Jiguang
Gongcheng/Infrared and Laser Engineering, v 40, n 10, p 2028
-
2032, October 2011


200.Analysis of molten pool configuration and welding stability during high
-
power fiber laser
wel
ding

Gao, Xiangdong (Faculty of Mechanical and Electrical Engineering, Guangdong University of
Technology, Guangzhou 510006, China); Zhang, Yong; You, Deyong; Seiji, Katayama Source:
Hanjie Xuebao/Transactions of the China Welding Institution, v 32, n 9,
p 13
-
16, September
2011


201.Hollow fiber supported liquid
-
phase microextraction using ionic liquid as extractant for
preconcentration of benzene, toluene, ethylbenzene and xylenes from water sample with gas
chromatography
-
hydrogen flame ionization detect
ion

Ma, Xiaoguo (Faculty of Environmental Science and Engineering, Guangdong University of
Technology, Guangzhou, 510006, China); Huang, Minghua; Li, Zhihua; Wu, Jianmei Source:
Journal of Hazardous Materials, v 194, p 24
-
29, 30 October 2011


202.Effects

of adding 0.05% (La+Ce) on intermetallic compounds at Sn
-
X
-
Cu
-
Ni/Cu interface

Chen, Hai
-
Yan (Faculty of Materials and Energy, Guangdong University of Technology,
Guangzhou 510006, China); Jie, Xiao
-
Hua; Zhang, Hai
-
Yan; Guo, Li Source: Cailiao
Gongcheng/Jo
urnal of Materials Engineering, n 9, p 29
-
32+38, September 2011


203.A review on development and trend of Intelligent Maintenance System

Ao, Yinhui (Faculty of Mechanical and Electronic Engineering, Guangdong University of
Technology, Guangzhou, Guangdo
ng, 510090, China) Source: Advanced Materials Research, v
314
-
316, p 2365
-
2369, 2011, Advanced Manufacturing Technology


204.Research of high efficiency combined wire electrochemical machining technology and its
application

Wu, He (Faculty of Mechanical

and Electronic Engineering, Guangdong University of Technology,
China); Xiao, Shuhong; Li, Qingguo; Zhang, Yongjun Source: Advanced Materials Research, v
314
-
316, p 1015
-
1019, 2011, Advanced Manufacturing Technology


205.Empirical study on process opti
mization of MTO production systems

Guan, Yingying (School of Management, Guangdong University of Technology, NO.161 Yinglong