Tel: +
375296267936
Visiting address: Bjur
ö
gatan 48
Russian
contact:
+7 (499) 703
-
02
-
99
(
номер
абонента
44359)
SE 21
124
MALMÖ,
+7 (901) 904
-
33
-
55
(4435
9)
Sweden
E
-
mail:
euravitebsk@gmail.com
Swedish reg. No.: 556650
-
0277
http://euravitebsk.org
и
http://benninghoven.su
BENNINGHOVEN 160 T/H CAPACITY
MOBILE ASPHALT MIXING PLANT “MBA
-
2000”
STANDARD CONDITIONS
The plant is designed for a production of,
160 t/h of road mix with a finished product at initial
moisture 4% and of 160
C,
under the following standard conditions:
Aggregates temperature at dryer inlet 10
C
Altitude sea level
Average feed aggregates density 1.650 kg/m
3
Heavy
-
oil No: 6 calorific value
9.200 Kcal/kg
Heavy
-
oil No: 4 calorific value
9.700 Kcal/kg
Diesel oil calorific value ≥ 10.200 Kcal/
kg
Hot aggregates temperature increase 160 K
Mixture residual moisture content
0,3 %
Max. aggregates size 40 mm
Material passing screen 3 mm
35 %
Material passing screen 80
m
8 %
Production rate is inclusive of all recovered filler and a
verage value of 5 % in weight added
bitumen
Material not porous and hygroscopic with normal shape
Production tolerance rate according to ambient and parameter conditions ± 10 %
Crude Gas Strain of max. 250 mg/Nm
3
1.0
MOBILE COLD FEED SYSTEM
The unit i
s mounted onto a single axle articulated trailer unit.
1.1 Qty. 4 Aggregate Hoppers
Capacity : 15 m
3
each
Loading width : 3.500 mm
1.2. Qty. 4 Grids
Tel: +
375296267936
Visiting address: Bjur
ö
gatan 48
Russian
contact:
+7 (499) 703
-
02
-
99
(
номер
абонента
44359)
SE 21
124
MALMÖ,
+7 (901) 904
-
33
-
55
(4435
9)
Sweden
E
-
mail:
euravitebsk@gmail.com
Swedish reg. No.: 556650
-
0277
http://euravitebsk.org
и
http://benninghoven.su
These grids which are dimensioned 50 x 100 mm are put on aggregate hoppers because of
preventing the nonsta
ndart aggregates and foreign materials falling on the belt. So they can’t go to
the plant units.
1.3 Qty. 4 Belt Feeders
Each belt feeder is driven by a geared motor, which
is
regulated by a frequency system. Support rollers and
guide idlers ensure smo
oth running of the belt. A
starvation switch will inform the plant operator in
the
case of no material flow.
Belt length : 1.500 mm
Belt width : 650 mm
Drive : 2,2 kW
Capacity : 130 t/h each
1.4 Qty. 4 Belt Feeder Controls
All power elements, frequency co
ntrol units and control units are fitted in a group control cabinet
mounted on the cold feed system.
1.5 Qty. 1 Vibrator Unit for Sand Hopper
Drive : 0,26 kW
1.6 Qty. 1 Collecting / Inclined Conveyor
Located under the belt feeders, with direct feed into th
e dryer drum. The belt is specially designed
to be transported with the unit and therefore can be easily folded by a winch arrangement.
Belt length : 22.000 mm
Belt width : 650 mm
Drive : 7,5 Kw
1.7 Running Gear
Overall length : 17.100 mm
Overall width :
2.500 mm
Tel: +
375296267936
Visiting address: Bjur
ö
gatan 48
Russian
contact:
+7 (499) 703
-
02
-
99
(
номер
абонента
44359)
SE 21
124
MALMÖ,
+7 (901) 904
-
33
-
55
(4435
9)
Sweden
E
-
mail:
euravitebsk@gmail.com
Swedish reg. No.: 556650
-
0277
http://euravitebsk.org
и
http://benninghoven.su
Overall height : 4.200 mm
Total weight : 20.500 kg
Axle load : 11.000 kg
King pin : 2 inches diameter
King pin load : 7.500 kg
Tyres : Double wheel 425/65 R 22,5
2.0 MOBILE DRYER AND BURNER
The fully mobile dryer cylinder and burner arrangement
is fitted onto a double axle chassis. Rapid
installation is ensured through its special design.
2.1 Slinger Conveyor
-
reversible
Axis
-
centre distance : 3.500 mm
Belt width : 650 mm
Drive : 4 kW
2.2 Dryer Drum (TT. 8.22)
The dryer is of solid steel constru
ction. A special lifter design achieves the highest efficiency in the
heating process and low exhaust gas temperature. The lifters are secured with a special clamp and
bolt arrangement in order to allow easy replacement of the lifter patterns. An aluminium
cladding
with air insulation prevents heat loss and reduces the noise emission level. The dryer ends are
sealed with a special labyrinth arrangement.
The dryer is equipped with two (2) trunnion rings fabricated in wear resistant material. These are
fitted
with spring steel plates to allow a smooth operation. The dryer is driven by chain via a geared
motor and mounted on four (4) support rollers with two (2) thrust rollers to prevent excess
longitudinal movement.
The dryer chassis is
fabricated in heavy st
eel
construction to ensure a
long life.
Length : 8.000 mm
Diameter : 2.200 mm
Drum thickness : 12 mm
Drive motor : 37 kW
Insulation : Air insulation
2.3
BENNINGHOVEN
TYPE RAX
-
JET 3
TURBO G
-
O “S” OIL
AND NATURAL GAS
COMBI
BURNER
Tel: +
375296267936
Visiting address: Bjur
ö
gatan 48
Russian
contact:
+7 (499) 703
-
02
-
99
(
номер
абонента
44359)
SE 21
124
MALMÖ,
+7 (901) 904
-
33
-
55
(4435
9)
Sweden
E
-
mail:
euravitebsk@gmail.com
Swedish reg. No.: 556650
-
0277
http://euravitebsk.org
и
http://benninghoven.su
2.3.1 Main Explanations
T
he burner is a compact unit of mono bloc design. The burner unit is mounted on steel rails which
allows the whole unit to slide back for inspection of the burner and dryer drum. In line with the
dryer, the air flow is generated by an internal radial
-
axial
fan to ensure best combustion.
2.3.2 Main Technical Details
Exact proportions of fuel and combustion air are achieved by a servo motor arrangement. The servo
motor activates, via control levers, the oil metering valve and a multi wing air intake arrangemen
t.
The oil is injected by pump pressure into smallest particles to give efficient and complete
combustion.
Burner head is fabricated out of heat resistant steel.The control panel incorporates all monitoring
and control equipment together with indicators fo
r control of burner capacity. The temperature is
measured in the dryer discharge chute by a quick reacting FE
-
Constantan temperature sensor.
Optimum noise level reduction is achieved by a silencer arrangement fitted to the rear end of the
burner.
Burner Ty
pe : RAX
-
JET 3 G
-
O “S”
Burner Capacity : 350
–
1.400 kg/h Heavy
-
Oil
315
–
1.880 m
³
/h Naturel Gas
Turndown Range : 1 : 4 Heavy
-
Oil
1 : 6 Naturel Gas
Nominal heat output :
16.600 kW (=14.310.000 kCal/h)
Blower capacity : 21.000 m
3
/h
Blower pressure : 350 mm
WS
Blower motor : 33 kW
Oil pump capacity : 36 l/min.
Oil pump pressure : 30 bar
Oil pump motor : 4 Kw
Gas line pressure : 300mBar
Energy Table for The Design of The Burner
Heavy
-
oil (No: 4) : H
u
= 9.700 kcal/kg (40.600 kJ/kg)
Heavy
-
oil (No: 6) : H
u
= 9.20
0 kcal/kg (38.500 kJ/kg)
Diesel oil : H
u
= 10.200 kcal/kg (42.700 kJ/kg)
Naturel gas : H
u
= 7.600 kcal/m³ (31.800 kJ/m³)
2.3.3 Burner Head
The burner head is made of heat resistant material and not only influences the flame shape but also
effects intensive
mixing of natural gas and combustion air. The natural gas is ignited in the burner
head. This ensures a clean, soot free flame of high efficiency.
2.3.4 Burner Blower
The burner blower is an axial fan fitted with an internal hub
-
motor of a special enclosed
, watertight,
and dust
-
proof design. In accordance with the characteristic of the axial fan, the air flow is highly
turbulent ensuring optimum mixing with the natural gas atomized by jet system and thus ensures
maximum combustion economy.
2.3.5 Fuel Feed S
ystem
Tel: +
375296267936
Visiting address: Bjur
ö
gatan 48
Russian
contact:
+7 (499) 703
-
02
-
99
(
номер
абонента
44359)
SE 21
124
MALMÖ,
+7 (901) 904
-
33
-
55
(4435
9)
Sweden
E
-
mail:
euravitebsk@gmail.com
Swedish reg. No.: 556650
-
0277
http://euravitebsk.org
и
http://benninghoven.su
There is an equipment for using diesel
-
oil and natural gas. And also it is prepared for using
heavy
-
oil. If there is need to use preheater in the future it can be bought by paying its money.
Gas Supply Manifold
The manifold consists of all necessary
safety and control valves eccluding gas pressure regulator
after the main shutoff cock of the gas main.
2.3.6 Electronic Output Control
A thermostat senses the temperature of the material at the dryer discharge and passes the value to
the controller which
compares the required temperature with the actual temperature at the drum
discharge chute and regulates the burner fuel/air setting. The controller incorporates adjustable
sense and pause functions and achieves constant output control with adequate accura
cy.
2.3.7 Silencer
The silencer is a separate unit which is connected to the burner end. This special designed
construction reduces the noise level to a certain minimum. The silencer, like the burner, is
positioned on a track to allow the unit to slide bac
kwards.
2.4 Running Gear
Twin axle construction articulated trailer, equipped with twin line brake system, parking brake and
king pin, complete with landing and support legs. Complete light facility with position, brake and
indication lights.
Overall lengt
h : 12.900 mm
Overall width : 2.900 mm
Overall height : 4.200 mm
Total weight : 28.000 kg
Axle load : 17.500 kg
King pin : 2 inches diameter
King pin load : 10.500 kg
Tyres : 365/80 R 20
2.0
MOBILE BAG HOUSE FILTER UNIT
Tel: +
375296267936
Visiting address: Bjur
ö
gatan 48
Russian
contact:
+7 (499) 703
-
02
-
99
(
номер
абонента
44359)
SE 21
124
MALMÖ,
+7 (901) 904
-
33
-
55
(4435
9)
Sweden
E
-
mail:
euravitebsk@gmail.com
Swedish reg. No.: 556650
-
0277
http://euravitebsk.org
и
http://benninghoven.su
Fully mobile unit fitted onto a singl
e axle chassis complete with landing and support legs to ensure
easy installation and rapid relocation.
3.1 Dust Collecting Assembly
Filter capacity designed to match the plant capacity.
The filter is a cassette type filter in which the cloth filter bags a
re installed horizontally in order to
have easiest access. Cleaning mechanisms ensure effective cleaning of the bags. An integrated
preseparator
separates the coarse from the fine material. Discharge of the collected filler is by rotary
valve. The coarse f
iller is conveyed via Qty 2 Screw conveyors into the Hot Elevator. The fines are
blown into the filler silo.
The exhaust fan is situated at the rear end of the unit with the chimney mounted on top. Paint finish
is in heat resistant paint on the external su
rfaces. The control panel is fixed to the chassis frame.
Air volume : 42.000 Nm
3
/h
Filter area : 630/590 m
2
Stack diameter : 850 mm, braced
Stack height : 12.000 mm from ground level
Exhaust fan : 90 kW
Discharge fine filler : Qty. 2 Screw conveyors, 5.000
mm length each
Discharge coarse filler : Qty. 2 Screw conveyors, 5.000 mm length each
Screw conveyor drive : 4 kW
3.2 Running Gear
Single axle construction articulated trailer, equipped with twin line brake system, parking brake and
king pin, complete wi
th landing and support legs. Complete light facility with position, brake and
indication lights.
Overall length : 10.000 mm
Overall width : 2.980 mm
Tel: +
375296267936
Visiting address: Bjur
ö
gatan 48
Russian
contact:
+7 (499) 703
-
02
-
99
(
номер
абонента
44359)
SE 21
124
MALMÖ,
+7 (901) 904
-
33
-
55
(4435
9)
Sweden
E
-
mail:
euravitebsk@gmail.com
Swedish reg. No.: 556650
-
0277
http://euravitebsk.org
и
http://benninghoven.su
Overall height : 4.300 mm
Total weight : 16.000 kg
3.0
MOBILE SCREEN AND MIXING UNIT INCLUDING CONTROL CABIN
The complete mobile mixing and screening unit is fitted with a twin axle arrangement. Features of
the unit are its high output, flexibility and mobility.
4.1 Hot Elevator
Head section with discharge chute, complete head shaft, geared drive motor with buil
t in reverse
stop. Solid elevator chain with bolt on bucket attachments. The elevator tail section comes complete
with shaft and tensioning device.
The elevator has to be transported separately.
Capacity :160 t/h
Drive :15 Kw
4.2 Screen Assembly
-
4 Fracti
ons
Vibrating screen assembly. Longitudinal tensioned screen cloths.
Tel: +
375296267936
Visiting address: Bjur
ö
gatan 48
Russian
contact:
+7 (499) 703
-
02
-
99
(
номер
абонента
44359)
SE 21
124
MALMÖ,
+7 (901) 904
-
33
-
55
(4435
9)
Sweden
E
-
mail:
euravitebsk@gmail.com
Swedish reg. No.: 556650
-
0277
http://euravitebsk.org
и
http://benninghoven.su
Screen assembly is mounted onto coiled springs to isolate vibration.
Screen capacity: by regular feeding of all screen decks:
160 t/h with sand content (0
-
4 mm) of 35% aggregate
Screen ha
s to be transported separately.
4.3 Hot Bins
Dried aggregates are stored in 4 bins with a total Capacity of approx. 20 t
Bin Capacities:
Sand/Bypass 0
-
5 mm approx. 8,3 t
Stone 5
-
12mm approx. 4,0 t
Stone 12
-
19 mm approx. 4,0 t
Stone 19
-
38 mm approx. 3,7 t
T
otal 0
-
38 mm approx. 20,0 t
The discharge doors are operated by air cylinders which are fitted with solenoid valves to ensure
exact weighing
-
off. A temperature sensor PT 100 is fitted in the sand bin. Qty. 4 level indicators at
mid point in bins. Oversize
and overflow material is conveyed collectively to the outside.
4.4 Weighing System by Load Cells
For the weighing of aggregate, filler and bitumen, three individual systems are provided:
Aggregate Weighing
2.000 kg weigh hopper with two air cylinders opera
ted discharge door, mounted onto Qty. three (3)
electronic load cells.
Bitumen Weighing
200 kg heated weigh bucket, mounted onto Qty. three (3) electronic load cells.
Filler Weighing
For two (2) filler types, 300 kg weigh hopper mounted onto Qty. one (1) e
lectronic load cell.
Twin shaft paddle mixer achieving a homogeneous mixing process. The liner plates are bolted and
fastened to the outside to allow easy replacement of any wear parts. The mixer shaft is driven by
direct mounted geared motors complete wi
th flexible coupling.
Discharge through a semi
-
rotary mixer door operated by two air cylinders and additionally an anti
drip door to avoid spillage operated by one air cylinder.
The mixer is fitted with a pivot point to allow swinging down of the complete
mixer unit to ensure
easy maintenance. For temperature measurement an infrared radiation pyrometer is installed
underneath the mixer.
Drive motor : 2 x 22 kW, 56 rpm
Capacity : 2.250 kg
4.6 Platforms and stairways
Access to all levels.
4.7 Pneumatic system
with compressor
Compressor including compressed air receiver tank as well as pneumatic air supply on mixer tower.
Type : KAESER
Capacity : 1.53 m³/min. at 10 bar
Drive : 11 kW
Tel: +
375296267936
Visiting address: Bjur
ö
gatan 48
Russian
contact:
+7 (499) 703
-
02
-
99
(
номер
абонента
44359)
SE 21
124
MALMÖ,
+7 (901) 904
-
33
-
55
(4435
9)
Sweden
E
-
mail:
euravitebsk@gmail.com
Swedish reg. No.: 556650
-
0277
http://euravitebsk.org
и
http://benninghoven.su
Air receiver tank capacity : 1.000 lt
4.8 Mixer Tower Scavenging
Dust extractio
n by fan feeding into the dust collection system by easy clamping type duct work.
Drive : 2,2 kW
Capacity : 2.400 m³/h
4.9 Control Cabin with Switch Gear and Starters
Control cabin mounted on mixer chassis. Complete with heating, air conditioning and fluo
rescent
lights. Benninghoven computer controls incorporating microprocessor plus manual switching for
weighing, mixing, mixer discharging.
All necessary switches for cold feed, drying, mixing and emergency "Stop" switch.
4.10 "Online Batcher 3000" Computer
Control System
The Online Batcher replaces the once standard control panel complete with keys, lights and
indicators, in that all operating elements are represented visually on the screen.
Tel: +
375296267936
Visiting address: Bjur
ö
gatan 48
Russian
contact:
+7 (499) 703
-
02
-
99
(
номер
абонента
44359)
SE 21
124
MALMÖ,
+7 (901) 904
-
33
-
55
(4435
9)
Sweden
E
-
mail:
euravitebsk@gmail.com
Swedish reg. No.: 556650
-
0277
http://euravitebsk.org
и
http://benninghoven.su
All functions are controlled by touc
hing the screen, whereby additional security of the computer
lock largely prevents operating errors.
Likewise, the cold feed is controlled by the Online Batcher. After entry of the recipe and preselection
of quantity, the drying process is initiated. All c
omponents that are involved in the drying
process are started automatically, the order is processed and finally the drying process is properly
completed.
The Online Batcher also provides the option of manual operation. Each group of components can be
opera
ted automatically or manually. Each drive or door is assigned a button for manual operation.
The computer system for the mixing process controls (according to recipe and order) the weighing,
the mixing process and the charging of the mixed material storage
silo. Statistics of mixing process
are maintained.
System modules
Real time orientated module system, open
-
ended.
Digital modules
Aggregate weigher to 16 of 16 components
Filler weigher to 6 of 6 components
Bitumen weigher to 4 of 4 components
Recipe storage for 500 recipes
Pre
-
selection of target tonnage in 0.1 t steps
Analogue modules
Temperature input for control and for
balancing of the mixture temperature.
System modules
Real time representation of mixing process with graphical and alphanumerical controls of
the target and actual values on the colour screen.
Recipe creation and selection, balancing with daily, mont
hly and annual logs and parametric
representation are carried out using the monochrome text monitor.
Recipe input, alteration of basic parameters and advance entry of up to
9 customer orders, which can be entered and changed during the mixing process.
Customer orders may be interrupted and others given priority, whereby the remaining
amount is stored and can be called up again if required.
Free selection of mixing process; i.e. the filling of the weighers and the transfer of
aggregates, filler, bitume
n and recycled material into the mixer can be selected in any order.
Corrections can be made subsequently on the basis of previous mixtures.
Continuous tare compensation.
Statistical long term summing up of individual components.
Documentation by p
rinter or to hard drive with back
-
up to diskette.
Batch
-
log
-
printer
Modem connection for remote data transfer, for programme update and service
UPS
-
uninterruptible power supply
Tel: +
375296267936
Visiting address: Bjur
ö
gatan 48
Russian
contact:
+7 (499) 703
-
02
-
99
(
номер
абонента
44359)
SE 21
124
MALMÖ,
+7 (901) 904
-
33
-
55
(4435
9)
Sweden
E
-
mail:
euravitebsk@gmail.com
Swedish reg. No.: 556650
-
0277
http://euravitebsk.org
и
http://benninghoven.su
Batch File Manager
Programme for reading files in the asphalt compute
r with detailed search facilities using
different fields and print facility using the printer on the asphalt plant.
Batch File Manager for external evaluation
Programme for reading files in another company's computer with detailed search facilities
using
different fields and print out facility using a suitable Windows compatible printer.
Technical Data for Computer Control System
Computer Control
Industrial PC / Last technology
2x80 Gbyte Hard Disk
DVD
-
ROM drive
512 MB
-
SD
-
RAM
Interface card with fieldbus
-
system
19” LCD Monitor(qty.2) for visual
processing control and direct input of
commands.
Operating
-
System Windows SQL
Online UPS(700 VA)
Modem and Multiplexer
Printer
4.11 Wiring
Flexible cable with plug and socket adaptors.
4.12 Running Gear
Twin axle c
onstruction articulated trailer, equipped with twin line brake system, parking brake and
king pin, complete with landing and support legs. Complete light facility with position, brake and
indication lights.
Overall length: 14.500 mm / 16.500 mm
*
Overall wi
dth: 2.980 mm
Overall height: 4.300 mm
Total weight: 29.000 kg / 34.000 kg
*
Axle load: 17.000 kg / 19.600 kg
*
King pin: 2 inches diameter
King pin load: 12.000 kg / 14.400 kg
*
Tyres: 425/65 R 22,5
*
Technical data including elevator
5.0
RECLAIMED FILLER STO
RAGE
5.1 Qty.1 Stationary Filler Silo 40 m
3
Tel: +
375296267936
Visiting address: Bjur
ö
gatan 48
Russian
contact:
+7 (499) 703
-
02
-
99
(
номер
абонента
44359)
SE 21
124
MALMÖ,
+7 (901) 904
-
33
-
55
(4435
9)
Sweden
E
-
mail:
euravitebsk@gmail.com
Swedish reg. No.: 556650
-
0277
http://euravitebsk.org
и
http://benninghoven.su
Overall length : 12.300 mm
Overall width : 2.900 mm
Overall height : 4.250 mm
Overall weight : 6.500 kg
5.2 Filler silo ancillaries
Qty. 1 aeration facility
Qty. 1 level indicator
5.3 Filler Feed Unit
Qty. 1 fil
ler screw (from the filler silo to the filler
weigh hopper)
Overall length : 6.400 mm
Drive : 7,5 kW
5.4 Filler Delivery / Filler Elevator
Filler transported via filler elevator into the filler silo.
Capacity : 30 ton/h
Drive : 4 kW.
5.5 Filler Discharge
F
iller discharged via a special discharge pipe and a diameter 250 mm manual gate.
6.0 BITUMEN AND FUEL SUPPLY SYSTEM
This system is designed for to feed fuels for drying burner and thermal oil burner as to necessary
temperature and pressure levels.
6.1 Qt
y. 1 Bitumen Pump
Conveying pump with base frame 460 l/min, 11 kW
6.2
OPTION
S
–
Thermal Oil Heater, Bitumen and Diesel
-
Oil
Tanks with Piping and
Insulation
6.2.1 Thermal Oil Heater “TR 100” (Diesel
-
oil and Natural
Gas)
Capacity :1.000.000 kcal/h = 1.160 kW
Burner Capacity : 50
-
130 kg/h
(Diesel
-
Oil)
67
-
175 m³/h
(Natural Gas)
Thermal Oil Volume : 400 l
Max. Operating Temperature: 280
C
Thermal Oil Pump Drive : 11 kW
Delivery Pump : 60 m
3
/h
Expansion Tank : 750 l
Outlet Tank : 750 l
Burner Type : Combi (Diesel
-
oil and Natural Gas)
Oil Feeding Pressure : 500 mBar
Burner Gas Pressure : 300 mBar
Tel: +
375296267936
Visiting address: Bjur
ö
gatan 48
Russian
contact:
+7 (499) 703
-
02
-
99
(
номер
абонента
44359)
SE 21
124
MALMÖ,
+7 (901) 904
-
33
-
55
(4435
9)
Sweden
E
-
mail:
euravitebsk@gmail.com
Swedish reg. No.: 556650
-
0277
http://euravitebsk.org
и
http://benninghoven.su
6.2.2 Qty. 2 and Type “TB
-
50” Insulated and Horizontal Bitumen Tanks
These tanks are designed for the bitumen storage, preparation and service.
Capacity : 50 m³
Length :
12.000 mm (included insulation)
Diameter : 2.350 mm (included insulation)
Head type : Flat
Support quantity : 3
Heating pipes : Not welded
Body sheet thickneess : 6 mm
Heating Area : 50 m2
Insulation : 50 mm mineral or 80 mm glass wool
Cladding : 0,80 mm g
alvanised sheet cladding
6.2.3 Qty.1 and Type “TD
-
30” Horizontal Diesel
-
oil Tank
The tank is designed for diesel
-
oil storage, preparation and service.
Capacity : 30 m3
Length : 7.500 mm
Diameter : 2.350 mm
Head type : Flat
Support quantity : 2
Body sheet
thickneess : 5 mm
6.2.4 Bitumen and Thermal
-
oil Piping System Materials
There will be piping materials which are concerned of Qty. 2 bitumen tanks, Qty. 1 diesel
-
oil tank,
Qty. 1 thermal oil heater, dryer burner, thermal oil burner and bitumen weigh hopper
feeding and
circulation circuits in this scope.
6.2.5 One Set Bitumen and Thermal
-
oil System Pipework
There will be pipework which is concerned of Qty. 2 bitumen tanks, Qty. 1 diesel
-
oil tank, Qty. 1
thermal oil heater, dryer burner, thermal oil burner an
d bitumen weigh hopper feeding and
circulation circuits in this scope.
6.2.6 Bitumen and Thermal
-
oil Piping Insulation Materials
There will be piping insulation materials which are concerned of Qty. 2 bitumen tanks, Qty. 1
diesel
-
oil tank, Qty. 1 thermal o
il heater, dryer burner, thermal oil burner and bitumen weigh
hopper feeding and circulation circuits in this scope.
6.2.7 One Set Bitumen and Thermal
-
oil System Insulation Pipework
There will be insulation pipework which is concerned of Qty. 2 bitumen tan
ks, Qty. 1 diesel
-
oil
tank, Qty. 1 thermal oil heater, dryer burner, thermal oil burner and bitumen weigh hopper feeding
and circulation circuits in this scope.
İtem 6.2 Optional Extra Price: € 89.000,00 + VAT
Ex
-
Works Ankara
Tel: +
375296267936
Visiting address: Bjur
ö
gatan 48
Russian
contact:
+7 (499) 703
-
02
-
99
(
номер
абонента
44359)
SE 21
124
MALMÖ,
+7 (901) 904
-
33
-
55
(4435
9)
Sweden
E
-
mail:
euravitebsk@gmail.com
Swedish reg. No.: 556650
-
0277
http://euravitebsk.org
и
http://benninghoven.su
SUPERVISORY INSTALLATION AND COMMISSIONING
Benninghoven
-
provides two skilled engineers and
-
or technicians to supervise the installation
of the plant for a maximum of 2 working weeks. Addi
tional one supervisor for one week of
commissioning and training. Extra time needed for any reason will be charged separately at normal
Benninghoven
-
service costs
The customer provides:
Air ticket, local transportation and hotel accommodation for Benni
ng
hoven
-
experts,
Transport of the plant to site and all necessary cranage for the plant erection,
Tools and welding equipment,
Skilled and unskilled site labour in quantity as requested by our local supervisor,
Employer liability insurance for lo
cal labour.
TOTAL PRICE
–
Above Mentioned Delivery Scope Without Options
(red col
o
u
r)
:
€ 1.1
45.000,00
TERMS OF DELIVERY AND PAYMENT
Price Calculation:
EX
-
WORKS MULHEIM/GERMANY OR
ANKARA/TURKIYE
,
excluding customs duties, import taxes, cost of customs docu
ments and
any taxes, duties etc. in the country of destination.
Delivery Time:
MBA
-
2000 Mobile Asphalt Mixing Plant will be ready for dispatch
in Germany in 2
-
4 months after received of order.
Payment Terms:
By 100 % against Irrevocable Letter of Credit an
d confirmed through
a first class German Bank or direct bank transfer.
Quotation Validity: 7 days
This quotation is without prejudice, subject to prior sale.
The drawings shown in the quotation are schematic, for illustration purposes only, and thus may
va
ry from the actual plant quoted.
Exclusions
-
Not included in Delivery
Any items and performances not included in the quotation. The limit of the delivery is the top of the
foundation levels. Everything included in the foundations, reinforcing steel, anc
horage points etc
are customers supply.
Provision of the required cable trays, cable ducting, cable supports, electric cables and electrical
installation materials.
Provision of the mains cable connections from the transformer to the low voltage main distr
ibution.
Supply of main power distribution panel (near foundation of Mixing Tower, maximum distance 10
m). Link to power supply, at least 2 off CEE
-
power sockets 32A, at least
Tel: +
375296267936
Visiting address: Bjur
ö
gatan 48
Russian
contact:
+7 (499) 703
-
02
-
99
(
номер
абонента
44359)
SE 21
124
MALMÖ,
+7 (901) 904
-
33
-
55
(4435
9)
Sweden
E
-
mail:
euravitebsk@gmail.com
Swedish reg. No.: 556650
-
0277
http://euravitebsk.org
и
http://benninghoven.su
2 off power sockets 16A as well as at least 4 off earthed power sockets.
Provis
ion of lifting equipment and scaffolding including the cranage for the off loading of materials
and erection. Scaffolding and working platforms including any necessary protection against
inclement weather including wind, rain and snow.
Provision of anchora
ge materials, welding materials including electrical welding and gas welding
materials.
Demolition of existing plant components and eventual re
-
using these materials for fitting on the
new deliveries.
Repairing any paint damage occasioned during the erecti
on and any eventual requested additional
primer paint and top coat.
Customer is responsible for "All Risks" insurance of components comprising the contract, erection
equipment and materials, tools. A secured store room must be provided for safe storage of tools and
equipment.
Included in the delivery is an erection drawing, foundation drawing and the statistical calculation of
the steel works. Not included is the stati
cally calculation on the foundations and any assistance and
cost in obtaining acceptance and/or testing of the plant technical description, acceptance of test data
and acceptance of the plant.
Not included are access platforms for access to assemblies not
requiring regular service inspection.
Insulation of the bitumen and thermal oil pipes and all other heating assemblies.
Initial thermal oil filling is charged separately.
Telephone and telefax facilities are customer's responsibility. Costs to customers ac
count.
Adequate toilet, washing and changing rooms together with suitable eating area to be provided by
customer at own cost.
In the event of vehicle protection barriers being required, these are classified as customer supply.
In the event of additional re
gulations covering safety, controls required by the trade association
Government institutions or other officials, these can be provided against an additional costing.
Included here too are the requirements for noise emissions etc and fire warnings and prot
ection
installations.
The plant site must be levelled and suitable for heavy articulated transport vehicles.
In the scope of the erection contract it is essential that a flat storage area should be left free for
receipt of plant component parts, the distan
ce from the storage area to the plant assembly site
should not exceed 30 meters.
Not included is the low voltage distribution. The power supply is the responsibility of the customer.
Lightning protection and equalising of potential are to be carried out by
the customer, in accordance
with the local bye
-
laws.
Limit of Liability
Our liability for indemnification for negligence of duty is only valid in instances of gross
negligence by either the General Manager and/or departmental heads.
This restriction of li
ability is void when main contractual responsibilities are not implemented and
in the instance of violation of other contractual commitments which to our knowledge would result
in damage occurring.
Tel: +
375296267936
Visiting address: Bjur
ö
gatan 48
Russian
contact:
+7 (499) 703
-
02
-
99
(
номер
абонента
44359)
SE 21
124
MALMÖ,
+7 (901) 904
-
33
-
55
(4435
9)
Sweden
E
-
mail:
euravitebsk@gmail.com
Swedish reg. No.: 556650
-
0277
http://euravitebsk.org
и
http://benninghoven.su
The liability for damage to parts not included in the term
s of the contract is excluded, such damages
to be considered by both parties on completion of the contract as typical for this type of contract.
Furthermore the liability for damages is limited to damage only.
Benninghoven GmbH & Co. KG "Standard Terms of
Business" (incl. limit of liability) are
applicable for all assembly and commissioning projects.
Exclusions
–
not included in our warranty
Parts which are naturally included in wearing parts,
Durability of primer and cover coat paint, insofar as no spe
cial conditions or terms were
agreed,
The origin of fires and the resultant direct and indirect damage,
Damage of the filtration material resulting from malfunction of the filter cleaning mechanism
for a considerable unobserved period of time,
Compre
ssor should be serviced and guarantied by it’s manufacturer upon the request of the
customer.
In general:
The plant assembly must be serviced, inspected and repaired per instruction contained in our
"Operations and Service” manual.
The plant assembly must
be operated within the designed parameters in the plant data sheet.
The plant is designated as being commissioned at the point of being able to produce asphalt
material. This date coincides with commencement of the warranty period, provided that the plant
has not been stored by the customer for a period of more than three months.
Enter the password to open this PDF file:
File name:
-
File size:
-
Title:
-
Author:
-
Subject:
-
Keywords:
-
Creation Date:
-
Modification Date:
-
Creator:
-
PDF Producer:
-
PDF Version:
-
Page Count:
-
Preparing document for printing…
0%
Comments 0
Log in to post a comment