Glenair Military and Industrial Power and Signal Connectors

cypriotcamelUrban and Civil

Nov 29, 2013 (4 years and 1 month ago)

102 views

Glenair

Military and Industrial

Power and Signal Connectors


Series ITS (And FRITS) 5015 Type
Reverse Bayonet Connectors



Derived from MIL
-
DTL
-
5015 and
VG95234


Mating mechanism (3 reverse bayonets at
120
°
) derived from VG95234


With and without (ITB) steel stud on the
receptacle


Several options available: platings, insert
materials, contacts, backshell
terminations, etc.


FRITS version for Mass Transit Market
uses fire resistant inserts.

Front O
-
Ring

Shell

Insert

Crimp Contacts

Coupling nut

Grommet

Compression ring

Internal O
-
Ring

Backshell

Sleeve

Cable clamp

Straight plug

Receptacle

Insert

Crimp Contacts

Grommet

Compression ring

Internal O
-
Ring

Backshell

Box mount
receptacle

Series ITS Exploded View: Straight
Plug and Box Mount Receptacle


ITS Connector Series and Backshells


ITS Series Platings ROHS Compliance


Series ITS Specifications



Size 20, 18, 16, 12, 8, 4, 0, 4/0 crimp contacts.


Over 200 insert arrangements.


Available 8 AWG coaxial contacts


Aluminum alloy with cadmium
-
free surface
coatings.


-
55
°

C to +125
°

C continuous temperature
rating


Chemical and moisture resistant synthetic rubber
inserts


7.5 to 350 AMPS depending on contact selection.


Operating voltage by service ratings:


A: 250 VDC


D: 700 VDC


E: 1250 VDC


B: 2450 VDC


C: 4200 VDC



STR backshells lock the cables or wires
inside the connector, assuring IP67
environmental rating.



Possible to use different cable gages with
each connector size.




Termination of multiscreened cables is
accomplished by locking the braids between
sectors.




Availability of different terminations for
PG or Metric cable glands, rubber conduits,
etc.

Series FRITS
-

STR


Series IT 5015 Type

Threaded Coupling Connectors



Threaded connector derived from MIL
-
DTL
-
5015 and VG95234


Insert arrangemements: from MIL
-
DTL
-
5015, 1 to 150 contacts


Contact current rating: 7.5A to 350A


Silver or gold plated crimp and solder
contacts


Applications: Automatic machines,
brushless motors, welders, encoders,
agricultural machines, trains


Intermateable with certain competitor
products


Keyed polarization


Broad range of accessory fittings


Series ITH Rigid Insert Power and
Signal Connectors


Easy
-
to Assemble 5015
type connector with fifteen
insert arrangements with
size 8, 12, 16 and 20
contacts


Conforms to VG95234,
NFF 6103 and BS 6853


Low fire hazard plastic
insert, gold plated copper
contacts


Offers rapid assembly and
better electrical insulation


Removable Insert

Metallic Clip

INSERT WITH
W,X,Y,Z
POLARIZATION
KEYS

Series ITH :

Exploded view of plug and receptacle connector


ITZ Connectors



Another connector
derived form 5015, with
insert arrangements from
1 to 150 contacts


Fast mating trapezoidal
thread mating


5 connector sizes


Current rating: 7.5A to
350A

IPT Connectors



Derived from MIL
-
C
-
26482
-
Series I
and VG95328


Insert arrangements with 2 to 61
contacts and 7 contact sizes


Current rating: 7.5A to 13A


Intermateable with MIL
-
C
-
26482
Series I and VG95328


Compatibility as well to BS9522
F0017


Specials or custom designs available


Various classes available


Wall mount
receptacle

Shell

Contacts' insert

Contacts

Coupling nut

Grommet

Compression ring

Backshell

Cable clamp

Straight plug

Internal O
-
Ring

Receptacle

Contacts' insert

Contacts

Grommet

Compression ring

Backshell

IPT Connector Exploded View


Series 900 Power Connectors



Very robust heavy duty connector



Used in harsh environmental applications in
Mass Transit



Withstands high vibration and shock while
mantaining an excellent watertight seal



Coupling nut and backshell can be rubber
covered



Crimp type contacts for high current as well
as coax, triax, twinax



Current rating: 200
-
400A



Working Voltage: 900
-
2000 Vac



IP 67 when mated or protected with
required sealing components

Series 900 Power Connectors



Medium to low voltage rail
connectors used in car
-
to
-
car
connections



Current rating: 400A Max



IP68 environmental rating



Stainless Steel receptacle
protective flop lid



Rubber coated shells conform
to fire resistance standards

IRT Series Power Connectors

High Power Rectangular Series
Used to Connect:

1.

Bogey (Truck) Frame

2.

Engine
-
Frame

3.

Freight Car Power

IRT Series Power Connectors

3 pole power connector with size 4/0 solder contacts

-

Conductive front side (for continuity when the connector
is mated)

-

Terminals for joint of friction pipes 3530 according to
UNI4883 standard.

TECHNICAL CHARACTERISTICS:

-

Contacts section: 3 x 70 mm²

-

Working current: 350 A max

-

Working voltage: 3000 Vac

-

Test voltage: 8000 Vac

-

Working temperature: (from
-
25 to +70)
°
C

-

Coupling force: < 200 N

-

Environmental rating (mated connector): IP67


Single pole connectors
used for transmission
of high currents with
low voltage, as, for
example, on military
vehicles or industrial
equipment.


Reverse bayonet
coupling


5 connector sizes


Current Rating: 225A
to 950A


Series IGE: Single Pole Power
Connectors


VG96929 (IGE) Connectors

SHELLS




Material:



Aluminum alloy per QQP
416 Type II Class C



Plating:


Olive drab over cadmium


INSERTS




Material:


PTFE ( Teflon)


CONTACTS


Contact identification: Z for Pins






F for Sockets


Material:

Copper Alloy


Plating:

Silver


Supported Cable Sizes:


Size 16

H2= 25mm²


Size 18

H5= 50mm²


Size 22

H9= 90mm²


Size 28

H15=150mm²


Size 32

H24= 240mm²

Box mount receptacle

Receptacle

Rear O
-
ring

Front insert

Threaded pin contact

Rear insert

VG96929 (IGE) Connectors

Straight plug

Coupling nut

Front O
-
ring

Shell

Front insert

Crimp socket contact

Rear insert

VG96929 (IGE) Connectors

VG96929 (IGE) Connectors

CURRENT RATING AT 125
°
C


Shell size
16 18 22 24 32

Contact size
H2 H5 H9 H15 H24

Max.Current

225 350 570 750 950






Max. short
-
time load (approx. 0,5
-
1 sec)


750 1K 2K 3K 5K

VOLTAGE

Test Voltage:

1050 Vac


Working Voltage
: 350 Vac Max. according to MIL
-
STD
-
1344



Single pole power connectors



Color coded poloarization



Current rating: 245A



Working voltage: 1500 Vde



UL94
-
V0 plastic body with
silver plated contacts

UniPower Connectors



UniPower

provides safe and reliable
connections in power distribution
systems.


Available in four formats (Panel Drain,
Panel Source, Line Drain, Line
Source).


Includes three phases (L1
-
L2
-
L3), earth
(G) and neutral (N). Typically used for
applications in motors, generators,
power distribution boxes.


Current rating: 600A max


Plastic bodies are fire resistant and high
impact resistant


Watertightness in mated condition


Mechanically and color coded


Daisy chain available

UniPower Connectors



CABLE SECTION :

UNIPOWER 400 (Standard) : 120mm² Max




UNIPOWER 800 (Standard) : 300mm² Max



MAX CURRENT :

UNIPOWER 400 : 400A @ < 70
°

C



MAX CURRENT :
UNIPOWER 800 : 800A @ < 70
°

C




MAX EARTH VOLTAGE :

2Kv AC
-

3Kv DC



MIN FLASHOVER :

9.5Kv AC/DC (peak)



OPERATING TEMPERATURE :

-
30
°

+125
°

C



INSULATING RESISTANCE :

> 50 MOhm @ 500 VDC



ENVIRONMENTAL PROTECTION :

up to IP67 (coupled connector)



EL. ANTISHOCK PROTECTION :

IP2X


FLAME RESISTANCE




HEAT/FLAME RESISTANCE :

EN60309
-
I/BS550.7.5.4



MECHANICAL STRENGTH :

EN60309
-
I/BS550.7.5.4


UniPower Technical Characteristics


COMPRESSION SLEEVE

(for LINE SOURCE AND LINE DRAIN)


HIGH CONDUCTIVE CONTACT,

NUT & SPRING WASHER
(for PANEL DRAIN)


HIGH CONDUCTIVITY
MULTIPOINT CONTACT

HEX SET SCREW

FINGER TOUCH

INSULATING TIP

UniPower Contacts


CB Connectors: Miniature Audio
Connectors for Military Applications




Miniatueized bayonet connector
with spring loaded, self
-
cleaning
contacts


7 and 10 poles according to VG
95351 and VG 96934


Glenair product to be qualified


Used on the telecommunication
units, especially mobile, to
connect:

1.
Microphones

2.
Headphones

3.
Auxiliary equipment like
adapters, amplifiers , sensors



CB Connectors: Performance


MAIN CHARACTERISTICS


Resistance to extreme
environmental conditions


Waterproof in the unmated
condition


High reliability at low current and
voltage


Antimagnetic properties


High protection against EMI
-
RFI


Gold plated, copper contacts with
solder type or dip
-
solder
terminations


Industrial /

Commercial

Entertainment

Rail

Military

Telecom

Ruggedized Power and Signal Connectors for
Military, Industrial, Entertainment, Telecom
and Rail Applications