Trac Tech Systems RFID setup

confidencehandElectronics - Devices

Nov 27, 2013 (3 years and 10 months ago)

231 views

Trac Tech Systems RFID setup.


1. Load current printer firmware


14.130a.

Filename is
4210MG10_14130a.zg

.


2. Load current RFID firmware


1.7.1.80
. Filename is
modapp.rfm
.


Files can be sent to any port just like sending a print job.


3. Configure Acces
s Code.

This can be done one of two ways.


1
. DPL command


<STX>KcRICxxxxxxxx;

Sample file is included.


2
. Menu


PRINTER OPTIONS/RFID/UHF SETTINGS/ACCESS CODE


4. Set Gen2 lock action
-

PRINTER OPTIONS/RFID/UHF SETTINGS/GEN 2 LOCK ACTION





PERMALOCK



EPC area is permanently locked for writing.





PWD
-
READ/WRITE



Can be unlocked to write.


5. Set Unlock EPC for Write
-

PRINTER OPTIONS/RFID/UHF SETTINGS/UNLOCK EPC FOR WRITE





ENABLED


6. Set LOCK AFTER WRITE
-

PRINTER OPTIONS/RFID/LOCK AFTER WRITE





ENABLED


Steps 1
-
6 must be completed before Step 7 to allow
the
printer to calibrate properly.


7. Calibrate printer with desired RFID tags.


8. Lock menu


SYSTEM SETTINGS/SECURITY

to protect access to RFID Access Code.