Ceiling Div 26 Specs - Hubbell Wiring Device-Kellems

beaverswimmingAI and Robotics

Nov 14, 2013 (3 years and 11 months ago)

83 views


PART1

Overview

1.1

Company

1.

Hubbell Wiring Device Kellems is an established leader in the electrical industry and
is a strong proponent of innovative, integrated and simple energy saving lighting
controls.

1.2

How To Use Specification

1.

If
you have any questions or would like technical support, please contact your local
Hubbell Wiring Device Kellems representative or Customer Service at 1
-
800
-
288
-
6000.

PART2

Occupancy Sensors

2.1

Overview

1.

Hubbell H
-
MOSS
®

occupancy sensors are de
signed to meet a wide range of
applications. Hubbell ceiling and wall
-
mounted sensors are available with the most
up
-
to
-
date sensing technologies on the market today. Hubbell offers passive infrared
and ultrasonic sensors as well as a multi
-
tech version. H
ubbell occupancy sensors
provide simple installation, easy setup, and reliable long
-
term motion detection.

2.

Hubbell ATP, ATU & ATD series Ceiling Mount, ATP & ATD series Wall Mount and AP,
AU & AD sensors Wall Switch Sensors all feature patented Adaptive te
chnology that
continuously analyzes occupancy patterns and adjusts the time and sensitivity
settings to ensure that the sensor is providing maximum ROI and true maintenance
free "Install and Forget" operations.

3.

Passive Infrared (PIR) sensors use a multi
-
se
gmented lens to divide the space in
zones. When a person enters the sensor's field of view, the Fresnel
™ lens focuses
the IR energy emitted by the human body onto a pyro
-
electric detector. When the IR
signature moves between zones, the sensor interprets this movement as occupancy
and turns on available lighting. PIR technology provides excellent long
-
range
major
motion detection.

4.

Ultrasonic sensors utilize a volumetric sensing technology to monitor a specific area.
Transducers emit an inaudible wave pattern at a specific frequency filling the space
and bouncing off all surfaces in the coverage area. Ultrason
ic technology provides
superior minor motion detection.

5.

Multi
-
technology sensors incorporate both PIR and ultrasonic technologies into one
compact device. By utilizing both technologies the sensors provide superior
occupancy detection in areas where a sing
le technology sensor would not.

2.2

Work Included

1.

Contractor's work to include all labor, materials, tools, appliances, control hardware,
sensor, wire junction boxes and equipment necessary for and incidental to the
delivery, installation and furnishin
g of a completely operational occupancy sensor
lighting control system, as described herein in accordance with all applicable local
and national codes.

2.

Contractor/Supplier shall examine all general specification provisions and drawings
for related electric
al work required as work under Division 16.

3.

Contractor shall coordinate all work described in this section with all other applicable
plans and specifications, including but limited to wiring, conduit, fixtures, HVAC
systems and building management systems.

2.3

Equipment Qualifications

1.

Products supplied shall be from a manufacturer that has been continuously involved
in the manufacturing of occupancy sensors for a minimum of five (5) years.

2.

All components shall be UL listed, or other acceptable national
testing organization.

3.

Product must be manufactured in the USA and offer a five (5) year warranty.

2.4

System Description

1.

The objective of this section is to ensure the proper installation of the occupancy
sensor based lighting control system so that li
ghting is turned off automatically after
reasonable time delay when a room or area is vacated by the last person to occupy
said room or area.

2.

The occupancy sensor based lighting control shall accommodate all conditions of
space utilization and all irregula
r work hours and habits.

3.

Contractor shall warrant all equipment furnished in accordance to this specification to
be undamaged, free of defects in materials and workmanship, and in conformance
with the specifications. The supplier’s obligation shall include

repair or replacement,
and testing without charge to the owner, all or any parts of equipment which are
found to be damaged, defective or non
-
conforming and returned to the supplier. The
warranty shall commence upon the owner's acceptance of the project.
Warranty on
labor shall be for a minimum period of one (1) year.

2.5

Submittals

1.

Manufacturer shall substantiate conformance to this specification by supplying the
necessary documents, performance data and wiring diagrams. Any deviations to this
specifi
cation must be clearly stated by letter and submitted.

2.

Submit a lighting plan clearly marked by manufacturer showing proper product,
location and orientation of each sensor.

3.

Submit any interconnection diagrams per major subsystem showing proper wiring.

4.

Sub
mit standard catalog literature, which includes performance specifications
indicating compliance to the specification.

2.6

System Operation

1.

It shall be the contractor's responsibility to make all proper adjustments to assure
owner's satisfaction with t
he occupancy system.

PART3

Specific Requirements

3.1

Acceptable Manufacturers

1.

Hubbell H
-
MOSS
®

or Pre
-
Approved Equal. For pre
-
approval, provide all the
information listed under this section a minimum of ten (10) working days prior to
initial bi
d date.

2.

The listing of any manufacturer as "acceptable" does not imply automatic approval.
It is the sole responsibility of the electrical contractor to ensure that any price
quotations received and submittals made are for sensors, which meet or exceed the

specifications included herein.

3.2

Products

1.

All products shall be Hubbell H
-
MOSS® product numbers:

2.

Ceiling and Wall Sensors: ATD, ATU, ATP, ATD1600 and ATP1600 Series

3.3

Ceiling and Wall Sensors

1.

Sensor shall have a microprocessor and utilize Ad
aptive technology to optimize the
sensor behavior to fit occupant usage patterns and adjust sensitivity and time delay
to changing conditions.

2.

Sensor shall not require any manual adjustment at the time of installation or during
operation.

3.

Sensor shall adap
t automatically to changing room conditions.

4.

Sensor shall utilize either passive infrared only, ultrasonic only, or multi
-
tech
(passive infrared and ultrasonic) versions and shall utilize that technology to detect
motion. Sensor shall not react to noise or

ambient sound.

5.

Sensor's microprocessor shall monitor PIR background levels and/or ultrasonic
frequency changes and automatically make corresponding adjustments.

6.

Sensor shall incorporate a dual element pyrometer and 12
-
element cylindrical
Fresnel lens

7.

Sens
or shall be provided with a variety of mask inserts for PIR rejection to prevent
false tripping.

8.

Sensor's microprocessor shall monitor ultrasonic frequency changes and
automatically make corresponding adjustments.

9.

Sensor's microprocessor shall automaticall
y adapt to a continuous airflow situation.

10.

Sensor shall have an ultrasonic frequency of 32kHz or 40kHz.

11.

Sensor coverage shall range from 0 to 2000 sq. ft. depending on model.

12.

Sensor shall be available with either a 110 degree, 180 degree, or 360 degree fie
ld
of view.

13.

Sensor shall recognize, as a false on, the failure to detect motion 6 seconds after
motion is detected initially (turning on the lighting). The sensor shall decrease the
sensitivity in response to the false on.

14.

Sensor shall feature an 8
-
second
time out install test mode, which will automatically
revert to standard time out one hour after being put into test mode.

15.

Sensor shall have manual controls and override switches to force manual
adjustments.

16.

Sensor shall have controls behind a cover to resi
st tampering. All controls shall be
accessible from the front of the sensor.

17.

Sensor shall have timer that can be adjusted manually from 8 to 30 minutes.

18.

Sensor sensitivity shall be adjustable from 0% to 100%

19.

Sensor shall have a control knob that sets the m
inimum setting for the timer in
automatic mode.

20.

Sensor shall have control knobs for setting the initial automatic sensitivity
adjustments.

21.

Sensor shall have a switch to restore factory settings.

22.

Sensor shall have real time motion indicator LED's visible fr
om the front of the unit.
Red = Infrared, Green = Ultrasonic.

23.

Sensor shall be ceiling or wall mounted.

24.

Sensor shall accept Class 2 wiring.

25.

Sensor shall be UL listed (conforms to UL STD508 certified to CAN/CSA STD C22.2
NO.14).

26.

Sensor shall have a standard
5
-
year warranty.

27.

Sensor shall be available in White.


PART4

Execution

4.1

Installation

1.

It shall be the contractor's responsibility to locate and aim sensory in the correct
location required for a complete and proper volumetric coverage within
the range of
coverage(s) of controlled areas per the manufacturer's recommendations. Rooms
shall have (90) to one hundred (100) percent coverage to completely cover the
controlled area to accommodate all occupancy habits of single or multiple occupants
at
any location within the room(s). The locations and quantities of sensors shown on
the drawings are diagrammatic and indicate only the rooms which are to be provided
with sensors. The contractor shall provide additional sensors if required to properly
and c
ompletely cover the respective room.

2.

It is the contractor's responsibility to arrange a pre
-
installation meeting with the
manufacturer's factory authorized representative, at the owner's facility, to verify
placement of sensors and installation criteria.

3.

P
roper judgment must be exercised in executing the installation so as to ensure the
best possible installation in the available space and to overcome local difficulties due
to space limitation or interference of structural components.