Setup Guide for the RAD Interim Fix Pack 6.0.0.1

backdamagedInternet and Web Development

Jul 30, 2012 (4 years and 4 months ago)

336 views

1

of
9

Setup Guide for the
RAD
Interim
F
ix
P
ack 6
.
0
.
0
.
1



Warning: You cannot use ghosting or disk imaging to
install this software. You must install the software on
each machine separately. Do not change the computer
hostname after this software is installed
. It will only
function partially if you do.


Extract Files


1. Copy the files from RAD6 Interim Fix Pack CD 1 and CD2 to c:
\
temp
.


2. Click on c:
\
temp
\
Create_rad6001.exe and specify
File to create
as c:
\
temp and
Location of pieces
as C:
\
temp and press
OK
.




3. Click
OK
when the file is created successfully. A new file
rad6001.zip
has been
created in c:
\
temp.




4. Unzip the two zip files
rpu_6004.zip
, and
rad6001.zip
in c:
\
temp to
c:
\
temp
.


Prepare to Install RAD Fix Pack 6.0.0.1


1
. Navigate to
C
:
\
temp
\
rpu ,
open the policy_6004.xml file in the editor.

2

of
9


2
. The content of the file is shown below.

<?xml version="1.0" encoding="UTF
-
8"?>

<update
-
policy>

<url
-
map pattern="com.ibm.orca.product.updater"

url="file:///<.....>/rpu/60/update/site_6004.xml"/>

<
/update
-
policy>


3
. Change the content of the
policy_6004.xml
at
url =”file:///…...”/>
to

url=”
file:///
c:/temp
/rpu/60/update/site_6004.xml”/>


4
. Save the file in the same location.



Warning:
You must be

disconnected from the
Internet before installing
the fix pack. Either remove
the network cable from the computer or disable the
network connection (as show below).

If you do not
disconnect from the internet the fix pack will not
install properly.


5
.
Start


Settings


Control Panel


Network and Dial
-
Up Connections. Right click
on your active connection (such as the one identified by Local Area Connection) and
select
Disable
.




3

of
9

6
.

If IBM Rational Agent Controller is not installed, you can skip this step

(it will not
be in the list of services if it
is not installed).


S
tart


Settings


Control Panel


Administrative Tools



Services
. Right click on
IBM Rational Agent Controller. Pick Stop to
stop the service
. Verify that it no longer
says the service is Started in the Status column.





7
. Now s
elect Start


Programs


IBM Rational


IBM Rational Application
Developer V6.0 Trial


Rational Application Developer.



8
.
Click OK on the workspace selection dialog. Select Help


Software Updates


IBM
Rational Product Updater.




9
.
The Rational Prod
uct Updater screen should be opened. It runs independent of the
actual Rational Application Developer tool. Close RAD as it may later interfere with the
4

of
9

fix pack installation. Now, you should just have the updater open.



Warning:
It is very important t
hat you
have closed
RAD and you have stopped the Agent Controller
service before the Fix Pack starts to install. Only
Rational Product Updater should be open at this
point. If Agent Controller or RAD is running during
the fix pack install, the install wi
ll fail without
warning and RAD will only function partially.


1
0
. In the
IBM Rational Product Updater
dialog , choose
Preference
s


啰U慴a

S楴i猠
option.


1
1
. Click on the Browse button, navigate to
C:
\
temp
\
rpu
directory, and choose

policy_6004.xml
file
.





Press OK.


1
2
.
Click
Find Updates
.


1
3
. The Rational Product Updater will prompt you that
updates are
require
d
, and you are
prompted to install it before you can continue.

5

of
9


Click
OK
.


1
4
.
The Rational

Product Updater installs the update and restart
s.


Install the fix pack for Rational Application Developer
-

rad6001.zip.


1
. Click
Preferences


啰U慴a⁓楴is
.


2
. Navigate to
C
:
\
temp
\
rad
\
policy_6001.xml
.



Press
OK
.


3. Click on the Installed Products tab.


4. Click
Find Updates
.


5.
Ensure that the

checkbo
x for the fix pack is selected.


Tip
: To view the description for this update, click the update. The description is
displayed in

the Detailed information pane.



Note:

You may notice a warning informing that the update site url is not valid. Ignore

this
warning

as we are installing the fix pack from the hard disk and not downloading
from a web site.


6

of
9



NOTE: Ignore any warnings that say it’s an “Invalid update site URL”.


6. Click on
Install Updates

to start the installation.


7. Accept the lice
nse agreement and press OK. [Depending on the speed of your
computer processor and the amount of RAM in your computer, the update

might take an exte
nded period of time to install.]




8.
Once completed, you should see a message informing that the updates
were
successfully installed.

7

of
9



9. To verify the same, click on the Installed Products tab. You should see the updated
version displayed under
neath
.




10.
Close the updater when done.


8

of
9

11. You may now reconnect to the internet. To do so, select Star
t


Settings


Control
Panel


Network and Dial
-
Up Connections. Right click on your active connection (such
as the one identified by Local Area Connection) and select
Enable
.


Verification:


1.

Select
Start
-
>Programs
-
>IBM Rational
-
>IBM Ration Application Dev
eloper
V6.0 Trial
-
>Rational Application Developer.


2.

Change the workspace to
C:
\
rad
\
workspace
.


3.

When RAD starts, close the welcome screen.


4.

Select
Help


䅢Au琠䥂M⁒慴楯i慬⁓潦瑷慲e⁄ 癥汯lmen琠P污瑦潲m
. You
should see the updated version





5.

Click

OK.


6.

Select the server tab; you’ll see
WebSphere Application Server v6.0.




9

of
9

7.

Right click on
WebSphere Application Server v6.0
and select Start.




8.

Ensure the server status changes to Started.




9.

Stop the server by right clicking on
WebSphere Application Ser
ver v6.0
and
select
Stop
.


10.

Ensure the server status changes to
Stopped
.


11.

Close Rational Application Developer.