Item Spec's Spec's with Sw

agerasiaetherealAI and Robotics

Nov 24, 2013 (3 years and 4 months ago)

88 views

Item

Spec's

Spec's with Sw

DL
3155M21R

SIGNAL PROCESSING

-

didactic equipment
-

circuit blocks: analogue
signals and digital signals, unipolar codes, bipolar codes, the A/D
conversion, step A/D converters, A/D converter of parallel or flash type,
simple slope A/D converter, double slope A/D converter, the D/A
c
onversion, weighed resistance D/A converter, D/A converter with R
-
2R
network, voltage/frequency conversion, voltage/frequency conversion
with slope method, voltage/frequency conversion with charge balance
method, digital acquisition system, sampling and ho
lding of signals
-

theoretical topics: analogue to digital converter, digital to analogue
converter, voltage to frequency converter, frequency to voltage
converter, data acquisition, sample and hold
. Fault simulation.
It must
be possible to perform the following experiences: Analog/Digital
converter, Digital/Analog converter, Voltage/Frequency converter,
Frequency/Voltage converters.
The faults must be inserted by
microswitches mounted on the board; the module must be p
rovided
with a EISA BUS 31+18 INTERFACE, connections and test points by 2mm
terminals.

Dimensions of the module: 297x260mm.

The module must be supplied with a theoretical and practical manual.

SIGNAL PROCESSING

-

didactic equipment
-

circuit blocks: ana
logue
signals and digital signals, unipolar codes, bipolar codes, the A/D
conversion, step A/D converters, A/D converter of parallel or flash type,
simple slope A/D converter, double slope A/D converter, the D/A
conversion, weighed resistance D/A converter
, D/A converter with R
-
2R
network, voltage/frequency conversion, voltage/frequency conversion
with slope method, voltage/frequency conversion with charge balance
method, digital acquisition system, sampling and holding of signals
-

theoretical topics: ana
logue to digital converter, digital to analogue
converter, voltage to frequency converter, frequency to voltage
converter, data acquisition, sample and hold
. Fault simulation.
It must be
possible to perform the following experiences: Analog/Digital conve
rter,
Digital/Analog converter, Voltage/Frequency converter,
Frequency/Voltage converters. The faults must be inserted by software
and by

microswitches
mounted on the board
. The module must be
provided with a EISA BUS 31+18 INTERFACE for connection to pow
er
supply and PC,
with a software able to allow the study of theoretical
topics through PC with hyper textual navigation according to the HTML
standard.
C
onnections and test

points by 2mm terminals.

Dimensions of the module: 297x260mm.

The module must be

supplied with a theoretical and practical manual.