QTY (7)New CATERPILLAR 3516C OFFSHORE ELECTRIC POWER MODULE RATED 2150 BHP (2178 KVA) @ 1200 RPM (SCR DUTY) EPA TIER II CERTIFIED. REMOTE RADIATOR COOLING ABS CERTIFIED STANDARD & OPTIONAL EQUIPMENT INCLUDES:

advertiserpaintrockOil and Offshore

Nov 8, 2013 (4 years and 1 day ago)

91 views

QTY (7)New CATERPILLAR 3516C OFFSHORE ELECTRIC POWER MODULE


RATED 2150 BHP (2178 KVA) @ 1200 RPM (SCR DUTY)


EPA TIER II CERTIFIED. REMOTE RADIATOR COOLING


ABS CERTIFIED



STANDARD & OPTIONAL EQUIPMENT INCLUDES:



AIR INLET SYSTEM



Aftercooler core, corrosion resistant


Air cleaner, regular duty with soot filters & service indicators


CONTROL SYSTEM


Caterpillar ADEM III electronic engine control. Customer supplied 24VDC

(20 amp)


clean intermittent
power is required


Governor Conversion


converts engine to direct rack controls requiring 0

to 200 ma


COOLING SYSTEM


In order to assure compliance and use customer provided heat exchanger or


radiators must be capable of rejecting e
nough heat to allow proper

operation at


worst case site conditions and also must supply 107ºF SCAC cooling water

to the


aftercooler inlet with a SCAC flow rate of at least 130 GPM with an ambient


temperature of 86ºF and at site cond
itions including altitude consideration.



Outlet controlled thermostat & housing


Jacket water pump


gear driven


Single outlet for jacket water circuit


Aftercooler fresh water cooling pump


gear driven.


EXHAUST SYSTEM



High displacement exhaust fitting, flexible, (12 in)


Exhaust flange and expander, weldable, (16 in)


Dry gas tight exhaust manifolds with thermo
-
laminated heat shields.


Dual Turbochargers with water
-
cooled bearings and thermo
-
laminated heat

shields.


Maxim MSA 1
-

16” Spark Arresting silencer w/ flange & hardware kit


(shipped loose for piping & mounting by OTHERS)


FLYWHEELS & FLYWHEEL HOUSINGS


Flywheel & Housing, SAE 00


SAE standard rotat
ion


FUEL SYSTEM


Duplex fuel filter, LH service


Fuel transfer pump


Flexible fuel lines


Fuel priming pump, RH


Electronically controlled fuel injectors


INSTRUMENTATION


Engine Mounted Instrument Panel:



Digital display to include:


Engine oil pressure


Engine water temperature


Fuel pressure


System DC voltage


Air inlet restriction



Exhaust temperature, RH & LH turbo discharge


Fuel filter differential pressure


Oil filter differential pressure


Service meter


Tachometer


Instantaneous fu
el consumption


Total fuel consumed


Engine start
-
stop (off, auto start, manual start)


LUBRICATION


Lubricating oil, SAE 10W30


Crankcase breather


Oil cooler


Duplex oil filter


Oil pan
drain valve


High tilt oil pan (15 degree continuous, 22.5 degree transient, all

directions)


Centrifugal oil filter


Metal particle detector w/ annunciator point


Air prelube pump


MOUNTING SYSTEM


Inner rail sy
stem, Offshore oil field subbase


Engine and Generator mounting groups


Engine and generator,


Three point mounted to sub
-
base Integral spring isolators with limit stop


Lift provisions on Base


Oil drain extension



Engine length drip pan with drain


Torsional dampened driveline couplings


Flywheel engine
-
generator coupling guard


POWER TAKE
-
OFFS


Accessory drive, upper LH front (available for PTO usage)


PROTECTION SYSTEM


ADEM II
I monitoring system provides engine deration, alarm, or


shutdown strategies to protect against adverse operating conditions.


Selected parameters are customer programmable.


Safety shutoff protection, electrical:



Oil pressure


Water temperature


Overspeed
-

Includes air inlet shutoff, activated on overspeed or


emergency stop.


Crankcase pressure


Afterco
oler temperature


Alarms, electrical:


ECM voltage


Oil pressure


Water temperature (low and high)


Overspeed


Crankcase pressure


Aftercooler temperature



Low water level


Air inlet restriction


Exhaust stack temperature


Filter differential pressure (oil and fuel).


Derate, electrical:


High water temperature


Crankcase pressure


Aftercooler temperature


Air inlet restriction


Altitude


Exhaust temperature.


Emergency stop push button, located on instrument panel.


Alarm switches (oil pres
sure and water temperature), for connection to

customer


supplied alarm panel. Unwired.


STARTING SYSTEM


Air starting motor,


RH mounted


Air silencer & strainer








SINGLE POINT ELECTRICAL CUSTOMER CONNECTION BOX



Provides a package mounted junction box for customer connection

to the 3516B


engine. The following control lines will be brought from the

customer
-
connectors to


the MPD panel to the junction box:


Start / run / st
op lines


Emergency stop (customer shutdown) lines


Engine speed control


Primary & secondary CAT data link


+ /
-

Battery power


Shutdown notify relay (form “C” contact)


PL1000 module


RTD Module


Six (6) spare terminal points for customer use


GENERAL


Paint, Caterpillar yellow


Vibration damper & guards


Installation drawings


Long Term package preservation

EX
CLUSIONS



1. Applicable taxes are not included in this proposal

2. Spare parts & tooling are not included in this proposal

3. Generator voltage regulation & controls, engine speed controls & load

sharing controls are not included in t
his proposal.

4. Remote radiator cooling system / heat exchanger is not provided in this

proposal

5. Provisions for fuel cooling are not included in this proposal.

6. ABS site survey is not included in this proposal.


QTY (3) $420,000
EACh FOB

Qty (4) $445,000 EACH FOB