PC TECHNOLOGY
ONLINE QUESTIONS
Grade 12: ICT Cluster
Teacher: Manju
Alain FC
Name:
Page
1
of
26
1
Which type of memory is primarily
used as cache memory?
#SRAM
2
A customer
orders a new computer and specifies an internal read
-
write, non
-
volatile
storage device that uses low power, has fast access to data, and is reliable. What is a
suitable storage device that meets these requi
rements?
#solid state drive
3
Which type of ROM
can be reprogrammed with software while it is still physically
install
ed in the computer?
#EEPROM
4
Refer to the exhibit. Based on the advertisement that is shown, what is the native
resolution of this c
omputer system?
#1280 x 800
5
Which type of comput
er resources are direct lines to the processor used by computer
components to request info
rmation from the CPU?
#IRQs
6
Which two activities are normally controlled by the Northbridge part of the chip set?
(Choose two.)
#access to the RA
M
#access to the v
ideo card
7
Which type of RAM chip has the fastest clock rate but consumes the least power and
generates
the least heat?
#DDR3 SDRAM
8
Which expansion slot would be used to install a video capture card in a new
computer?
#Peripheral Com
ponent Interconnec
t
-
Express
9
A technician is helping a customer compare two hard drives. Which unit of
measurement is used for the hard drive speed?
#revolutions per minute
Page
2
of
26
10
Refer to the exhibit. Which type of cable is sho
wn in the graphic?
#Serial
11
Which type of
memory is unable to have the contents modified?
#ROM
1
2
Which important feature is offered by the USB standard?
#It can supply power fro
m the computer to devices.
13
Which CPU architecture uses a small set of instructions that are designed to
be
executed
rapidly?
#RISC
14
Which two characteristics are determined by the chip set on a motherboard?
(Choose two.)
#maximum amount of memory that can be installed
#type of connectors that
will be on the motherboard
15
Which two devices are considered input devi
ces? (Choose two.)
#biometric authentication device
#digital camera
16
Which technology would be best to use for drive redundancy
and data protection?
#RAID
17
Which two characteristics of a motherboard can be determined by the form factor?
(Choose two.)
#size
shape
18
Which two categories are used to classify CPU architecture?
(Choose two.)
#CISC
#RISC
19
Which three system resources are commonly used for communication between the
CPU or memory and other components in the computer? (Choose three.)
#IRQ
#DMA
#I/O address
Page
3
of
26
20
What is the function of a capture card?
#enables a video signal to be recorded
to the computer hard drive
21
Why are solid state drives reliable and therefore suitable to be installed in computers
used in harsh industrial workplaces
?
#They consume less power and have no moving
parts.
22
A technician needs to back up 4 GB of data using a single storage medium. Which
medium can hold the entire 4 GB
on a single disc?
#DVD+/
-
R
23
How many conductors are foun
d in a SATA data cable?
#7
24
What are the two connector types for the 1394a interface? (
Choose two.)
#4
-
pin
#6
-
pin
25
Which two form factors are commonly used to build a new compute
r? (Choose two.)
#BTX
#ATX
26
A company employee has very important data on a computer. What RAID l
evel
should be used if the criteria include that data be written and read simultaneously and
that all data be duplicated using a m
inimum of three drives?
#5
27
PATA data cables are available in two different types. The types are distinguished by
the numbe
r of conductors. Which two types are availa
ble? (Choose two.)
#40
#80
28
Which three devices are considered output devices? (Choose three.)
#headphones
#monitor
#printer
Page
4
of
26
CHAPTER 2
-
SAFE LAB PROCEDURES AND TOOL USE
1 Refer to the exhibit. Which type
of tool is shown in the graphic?
cable meter
digital multimeter
network traffic monitor
electrostatic discharger
2 A technician has a room of computers which are running very hot. The
technician
discovers that the heat sinks in the computers are very dust
y.
What should the
technician use to clean the heat sinks?
mild cleaning solution
lint
-
free cloth
isopropyl alcohol
compressed air
3 A technician wants to limit the chances of ESD affecting his workspace.
Which three
precautions should be taken? (Choose t
hree.)
Store all computer components in clear plastic bags.
Ensure antistatic mats are on the workbench and floor.
Wear an antistatic wrist strap.
Ensure that all flooring is carpeted.
Keep all components in antistatic bags.
Keep environment cool and dry.
4 Which two tools can help protect against ESD? (Choose two.)
Page
5
of
26
antistatic wrist strap
compressed air
antistatic mat
safety glasses
polyester clothing
5 A technician accidentally spills a cleaning solution on the floor of the
workshop. Where
would the tech
nician find instructions on how to
properly clean up and dispose of the
product?
the material safety data sheet
the insurance policy of the company
the local hazardous materials team
the regulations provided by the Occupational Safety and Health Administra
tion
6 The performance of a computer is reduced after it has been using the
Internet. Which
three tools could be run to try to improve the performance
of the computer? (Choose
three.)
Fdisk
Spyware Remover
Defrag
Disk Cleanup
a BIOS updater
Device Manager
Utility
7 Which tool in Windows XP gives a technician access to initialize disks and
create
partitions?
Defrag
Disk Cleanup
Disk Management
Format
Scandisk
8 Which tool should be used if a user needs to optimize space on a hard
Page
6
of
26
drive?
Defrag
Disk Manage
ment
Fdisk
Format
9 Which two types of tools can help protect a computer from malicious
attacks? (Choose
two.)
Anti
-
virus software
Disk Cleanup
Disk Management
Fdisk
Scandisk
Spyware Remover
10 What is the proper way to dispose of outdated CRTs?
All of t
he components should be disposed of into landfills.
All of the components should be properly incinerated.
All of the components should be recycled whenever possible.
All of the components should be sealed in containers and disposed of into landfills.
11 W
hich condition refers to a reduced voltage level of AC power that lasts
for a period of
time?
brownout
sag
spike
surge
12 What is recommended to remove dust from inside a computer case?
damp cloth
Page
7
of
26
dust cloth
household vacuum cleaner
can of compressed ai
r
13 Which three computer components contain hazardous materials and
require special
handling for disposal? (Choose three.)
batteries
floppy drives
monitors
optical drives
parallel cables
printer toner cartridges
14 Refer to the exhibit. Which type of
tool is presented in the graphic?
hex screwdriver
stripped screwdriver
Phillips
-
head screwdriver
flat
-
head screwdriver
15 Which Windows XP command
-
line utility scans the critical files of the
operating system
and replaces any files that have been corru
pted?
Page
8
of
26
Chkdsk
Defrag
Disk Cleanup
Disk Management
Scan System
System File Checker
16 Which precaution should be taken when working around electronic
devices?
Avoid using magnetized tools
Only use hand tools from the same vendor
Wear ESD protection to repai
r monitors in humid environments
Avoid using ESD wrist straps and ESD mats simultaneously
17 Which step should be performed first when servicing computer
equipment?
Wipe down the exterior with a lint
-
free, damp soft cloth.
Open the case and check for any
loose connections.
Turn off and remove the power source.
Replace any suspected bad components with known good components
18 Which condition refers to a sudden increase in voltage, which is usually
caused by
lightning?
brownout
sag
spike
surge
19
Which
is the minimum level of electrostatic discharge that a person can
normally feel?
5 volts
Page
9
of
26
1000 volts
3000 volts
10,000 volts
20
Which recommendation should be followed first when a fire in the
workplace is out of control?
Try to use the elevators to reach
the lowest floor faster
Contact emergency services for help
Use company water system to stop the fire from extending to other areas
Try to control the fire with proper extinguishers
21
Which two tools are recommended for cleaning a PC?
Antibacterial
spray
Compressed air
Mild abrasive detergent
Nylon brush
Rubbing alcohol
Soft cloth
22
Refer to the exhibit. Which type of tool should be used to remove the
screw depicted in the graphic?
Stripped screwdriver
Flat head screwdriver
Hex driver
Philips
head screwdriver
23. How does a technician discharge a static buildup?
Touching the painted part of the computer case
Touching the unpainted part of the computer case
Touching an anti static wrist strap before touching any computer equipment
Touching an
antistatic mat before touching any computer equipment
24. Which device is designed specifically to protect computers and electrical
devices from excess electrical voltage?
Power strip
Page
10
of
26
Standby power supply
Surge protector
Uninterruptible power supply
25.
Which three effects can be observed on computer components as a
result of climate?
Components overheat if it is too hot
Moisture damages computer parts if it is too humid
Components work too slowly if it is too cold
The risk of ESD increases if the
humidity is too low
The risk of ESD increases if the temperature is too high
Components overheat if the humidity is too low
26. Which condition refers to sudden and dramatic increase in voltage
which is usually caused by lightning?
Brownout
Sag
Spike
Surg
e
27. Which two devices commonly affect wireless LANs?
Blu
-
ray players
Home theaters
Wireless phones
Microwaves
Incandescent light bulbs
External hard drives
28. Which two computer components can contain very high voltages?
DVD ROM
Monitor
Power supply
Scanner
Wireless keyboard
Page
11
of
26
CHAPTER 3
1.A technician is installing a new power supply in a computer. Which type of power
connector should be used to connect to a PATA hard drive?
#molex
2.Refer to the exhibit. Which type of port is shown?
#USB
3.After a technician has assembled a new computer, it is necessary to configure the
BIOS. At which point must a key be pressed to start the BIOS setup program?
#during the POST
4.A technician is installing a new power supply in a computer. Which type of p
ower
connector should be used to connect to a floppy drive?
#Berg
5.Which solution should be used to clean a CPU and a heat sink?
#isopropyl alcohol
6.isopropyl alcohol
#7
7.A technician is troubleshooting a computer that has a malfunctioning floppy dri
ve. The
technician observes that the floppy drive light remains lit constantly. How should the
technician attempt to repair the problem?
#Connect the data cable making sure that the colored stripe on the cable is aligned with
pin 1 on the drive and the mot
herboard.
8.Which type of drive is installed in a 5.25
-
inch bay?
#optical drive
9.Which additional 4
-
pin or 6
-
pin power connector is required by some motherboards?
#AUX
10.A technician is assembling a new computer. Which two components are often easier
to install before mounting the motherboard in the case? (Choose two.)
#CPU
#Memory
Page
12
of
26
11.When building a computer, which two components are normally installed in 3.5
-
inch
drive bays? (Choose two.)
#hard drive
#floppy drive
12.Which port is typically used fo
r external wireless NICs?
#USB
13.A technician is installing a new CPU in a ZIF socket on a motherboard. What is the
primary way of securing the CPU in place?
#load lever
14.Which action is recommended to prevent the motherboard from contacting the metal
base of the case?
#Use standoffs to keep the motherboard above the metal base.
15.A field technician has been asked to install a wireless 802.11g NIC in a computer,
but is unsure about the expansion slots available. Which two types of wireless NICs
shoul
d the technician have available? (Choose two.)
#PCI
#PCIe
16.What is the most reliable way for users to buy the correct RAM to upgrade a
computer?
#Check the motherboard manual or manufacturer's website.
17.Refer to the exhibit. Which type of hard drive
uses the power connector shown?
#SATA
18.A technician has just finished assembling a new computer. When the computer is
powered up for the first time, the POST discovers a problem. How does the POST
indicate the error?
#It issues a number of short beeps.
19.What is a convenient way that a technician can tell whether a ribbon cable is for an
IDE hard drive or a floppy drive?
#The floppy cable has a twist in the cable.
20.Which internal component of a computer uses a 3
-
pin power connector?
#fan
Page
13
of
26
CHAPTER 5
1.Once minimum hardware requirements are satisfied, where should a technician look
to determine if the computer hardware has been tested with Windows XP?
*the Windows XP Hardware Compatibility List>
2.What are two features of upgrading Windows 2000 to W
indows XP? (Choose two.)
* The File System Is Upgrated To NTFS
*Windows 2000 applications and settings are kept.
3.While performing preventive maintenance, a technician notices that the operating
system is missing updates. How can the technician enabl
e automatic updates?
*Run the Automatic Updates utility from the Control Panel.
4.A technician has many new computers to set up. The technician completely
configures one master computer and makes an image of the hard drive. This image is
then installed on
the other computers. What is this process called?
*disk cloning
5.A user installs a new sound card driver in a computer that is working properly. After
installing the driver for the new sound card the computer fails to boot. Which quick fix
can the use
r implement to return to the previous working state?
*boot to Last Known Good Configuration
6.A user is running Windows Vista and has an application that runs in Windows XP but
the application fails to run in Vista. In which Vista mode should the user t
ry running the
application?
*compatibility mode
7.A technician has a computer that is unable to boot Windows XP properly. The
technician has decided that it is necessary to attempt a repair of XP. Which utility will be
run if the technician selects
Repa
ir XP
from the XP boot disk?
*Recovery Console
Page
14
of
26
8.Which operating mode is used by Windows XP to run a DOS application?
*real mode
9.Which set of guidelines is used to ensure that programmers develop applications that
are compatible with an operating syste
m?
*API
10.When a computer boots from the Windows Vista disc, which three functions are
performed if the Custom (advanced) option is selected? (Choose three.)
*A clean copy of Windows Vista is installed.
* The location of the Windows installation can
be selected.
*Changes to disk partitions can be made.
11.As a user attempts to boot the computer, the message "NTLDR is missing" is
observed on the screen. What will result from this situation?
*The operating system will fail to load.
12.In which two s
ituations should a technician create a restore point? (Choose two.)
*before installing a new device driver
*before an operating system update
13.A technician has installed new video drivers on a Windows XP computer and now
the monitor shows distorted im
ages. What startup mode can the technician use to
access a new driver on the network?
*Safe Mode
14.A user in a large manufacturing company uses a PC that is connected to the
company network. Where should the user look to find a server attached to the net
work?
*My Network Place
15.A user decides to install a new version of Windows Vista but needs to retain the
configurations and customizations of the current Windows XP operating system. Which
software can be used to achieve this?
*Windows User State Migr
ation Tool
Page
15
of
26
16. A technician is attempting to create multiple partitions on a hard disk. This will allow
for storing the operating system and data files on separate partitions. What is the
maximum number of primary partitions per hard drive that is
supported by Windows
XP?
*4
17.Refer to the exhibit. During the installation of Windows Vista, you are prompted with
a screen that asks for a username and password. What type of account is created when
you select
Next
after entering a username and passwor
d?
*A user that has Super User rights for this installation
18. A technician needs to upgrade the file system on a Windows XP computer from
FAT32 to NTFS. Which course of action should be taken to upgrade the file system to
NTFS?
*Run the Microsoft Conve
rt utility.
19.A technician needs to upgrade the operating system on a computer from Windows
2000 Professional to Windows XP Professional. When the technician inserts the XP
disc in the computer, the setup wizard fails to start. Which command can be use
d to
start the upgrade?
*winnt32
20.Refer to the exhibit. During a Windows Vista installation, the
Select Your
Computer's Current Location
screen fails to display. What could be a possible reason
for the absence of this screen?
*The network card driver w
as incorrectly installed.
21.Which three settings are available to personalize the appearance of the desktop on a
Windows Vista computer? (Choose three.)
*Theme *Screensaver *Taskbar Properties
22.A technician thinks that the file system on a computer ha
s a problem because
Windows XP is reporting data integrity issues. Which Windows XP utility will check the
file system for errors?
*chkdsk
23.A technician installing Windows Vista has come to the point where the product
activation key is requested. What o
ccurs if a product key is unavailable?
*The user will be asked for a product key, but the installation can continue without a key
Page
16
of
26
24.When troubleshooting a printer problem, a technician finds that the operating system
was automatically updated with a corr
upt device driver. Which solution would resolve
this issue?
*Roll Back the Driver
25.What are three features of the Microsoft Management Console (MMC)? (Choose
three.)
*MMC logs a history of application events.
*It organizes operating system snap
-
ins.
*It
displays computer performance information
26.Windows Vista has a feature called the Sidebar. Which three types of items can be
contained within the Sidebar? (Choose three.)
* games*Clock *Sticky Note
27.A company with 40 computers needs to reduce repai
r costs, decrease downtime,
and improve reliability. Which task will meet these needs?
*Develop a preventive maintenance plan.
28.A user reports that a Windows XP system is unable to boot properly. How can the
technician advise the user to boot into Safe
Mode?
*Reboot the system, press and hold
F8
until a menu is displayed, and then select
Safe
Mode
29.
A technician has finished installing Windows XP. What should the technician do to
verify that all hardware has been installed correctly?
*Use the Device Ma
nager utility to ensure that all the devices are operational.
30.What would be the result of having a corrupt Master Boot Record?
*The operating system will fail to start.
CHAPTER 1 & 2 DISCOVERY IS INCLUDED IN THE PC TECHNOLOGY
TERM 1
EXAM.
Discovery
–
CHAPTER 1
1. Which computer component is considered the nerve center of the computer system
and is responsible for processing all of the data within the machine?
• RAM
• CPU
• video card
Page
17
of
26
• sound card
• operating system
2. What are two advantages
of purchasing a preassembled computer? (Choose two.)
• usually a lower cost
• exact components may be specified
• extended waiting period for assembly
• adequate for performing most general applications
• suited for customers with special
needs
3. A
user plans to run multiple applications simultaneously on a computer. Which
computer component is essential to accomplish this?
• RAM
• NIC
• video card
• sound card
• storage device
4. Which adapter card enables a computer system to exchange inform
ation with other
systems on a local network?
• modem card
• controller card
• video card
• sound card
• network interface card
5. What is the main storage drive used by servers, desktops, and laptops?
• tape drive
• hard drive
• optical drive (DV
D)
• floppy disk drive
6. Which component is designed to remove high
-
voltage spikes and surges from a
power line so that they do not damage a computer system?
• CPU
• surge suppressor
• motherboard
• hard drive
7. What are two examples of output p
eripheral devices? (Choose two.)
Page
18
of
26
• printer
• speakers
• flash drive
• external DVD
• external modem
8. What two functions does a UPS provide that a surge protector does not ? (Choose
two.)
• protects the computer from voltage surges
• provides bac
kup power from an internal battery
• protects the computer from sudden voltage spikes
• gives the user time to phone the electrical company
• gives the user time to safely shut down the computer if the power fails
• provides backup power through a gene
rator provided by the wall outlet
9. What is a word processor?
• It is a physical computer component.
• It is a program designed to perform a specific function.
• It is a program that controls the computer resources.
• It is a functional part of an o
perating system.
10. What is the purpose of the ASCII code?
• translates bits into bytes
• interprets graphics digitally
• translates digital computer language into binary language
• represents letters, characters, and numbers with bits
11. Why do
servers often contain duplicate or redundant parts?
• Servers require more power and thus require more components.
• Servers should be accessible at all times.
• Servers can be designed as standalone towers or rack mounted.
• Servers are required by ne
tworking standards to have duplicate parts.
12. What are two benefits of hooking up a laptop to a docking station? (Choose two.)
• Mobility is increased.
• An external monitor can be used.
• Alternate connectivity options may be available.
• The keyb
oard can be changed to a QWERTY
-
style keyboard.
• More wireless security options are available.
Page
19
of
26
13. Applications can be grouped into general use software or industry specific software.
What are two examples of industry specific software? (Choose two.)
• CAD
• presentation
• spreadsheet
• word processing
• medical practice management
• contacts/scheduling management
14. Which three terms describe different types of computers? (Choose three.)
• operating system
• network
• laptop
• desktop
• W
indows
• mainframe
15. How is a server different from a workstation computer?
• The server works as a standalone computer.
• The server provides services to clients.
• The workstation has fewer applications installed.
• The workstation has more user
s who attach to it.
16. How many values are possible using a single binary digit?
• 1
• 2
• 4
• 8
• 9
• 16
17. What measurement is commonly associated with computer processing speed?
• bits
• pixels
• hertz
• bytes
18. What can be used to p
revent electrostatic discharge (ESD)?
• dry and non humid conditions
• carpeted floor
Page
20
of
26
• grounding strap
• uncluttered work space
19. If a peripheral device is not functioning, what are three things you should do to solve
the problem? (Choose three.)
• Use the testing functionality on the peripheral itself, if available.
• Verify that all cables are connected properly.
• Disconnect all cables connected to the computer except those connected to the
peripheral.
• Ensure that the peripheral is powered
on.
• Disconnect the peripheral and verify that the computer is operating normally.
• Reload the computer operating system.
20. Which two steps should be performed when installing a peripheral device? (Choose
two.)
• Download and install the most cur
rent driver.
• Connect the peripheral using any cable and any available port on the computer.
• Connect the peripheral using an appropriate cable or wireless connection.
• Test the
peripheral on another machine before installing it on the one where it wi
ll be used.
• Check the computer documentation to see if the peripheral vendor is compatible with
the PC vendor.
21. In newer operating systems, how are system resources assigned by default when
components are installed?
• manually assigned by the oper
ating system
• manually assigned by the administrator
• statically assigned by the component to a preset resource
• dynamically assigned between the component and the operating system
CHAPTER
–
2
Q.1 An operating system is severely damaged. All data on the partition needs to be
deleted, and all application software must be reinstalled. Which installation method
should be used to correct the problem?
clean install
upgrade
multi
-
boot
virtual
ization
Page
21
of
26
Q.2 Which two statements should be included in a pre
-
installation checklist when
upgrading an operating system? (Choose two.)
Verify that the hardware resources have multiple partitions.
Verify that the hardware resources meet or exceed the
published minimum
requirements.
Complete a full backup of all important files and data.
Overwrite any data currently contained on the drive to remove all contents.
Verify that the hardware resources are certified to work with the existing operating
system prior to upgrading.
Q.3 Which three pieces of information must be specified on a computer to allow that
computer to send and receive information across networks? (Choose three.)
closest server
operating system
IP addrese
subnet mask
de
fault gateway
network card driver
Q.4 Which two items must be unique to each computer and cannot be duplicated on a
network? (Choose two.)
partition
file system
computer name
IP address
operating system
Q.5 Which method of interacting wi
th an operating system involves typing commands at
a command prompt?
Page
22
of
26
CLI
GUI
redirector
kernel translator
Q.6 What are three characteristics of an operating system that is released under the
GPL (GNU Public License)? (Choose three.)
full acc
ess to source code
software often available free
structured development cycle
can be expensive to purchase
limits what end
-
user can do with code
support normally user
-
based and often free
Q.7 What is the purpose of a default gateway?
physic
ally connects a computer to a network
provides a permanent address to a computer
identifies the network to which a computer is connected
identifies the logical address of a networked computer and uniquely identifies it to
the rest of the network
id
entifies the device that allows local network computers to communicate with
devices on other networks
Q.8 Which two statements are true about drive partitions? (Choose two.)
Partitions are necessary in multi
-
boot installations.
A hard drive can be divided into an operating system partition and a data partition.
User data is never overwritten when a drive is partitioned.
A disk partition is a defined section of an operating system.
Each partition requires a different file sy
stem type
Page
23
of
26
Q.9 What occurs when computers are configured to receive their network configurations
dynamically?
Each computer receives a permanent IP address.
A network administrator enters information on each computer.
Each computer requests config
uration information from a server.
An NIC automatically provides configuration information to the computer and stores
that configuration information.
Q.10 What are two ways that a user can interact with an operating system shell?
(Choose two.)
CLI
OS
GUI
NIC
kernel
Q.11 Which three resource specifications are given by the manufacturer to ensure that
an operating system performs as designed? (Choose three.)
required hard disk space
type of accelerated graphics card
recommended amoun
t of RAM
printer requirements
processor type and speed
type of keyboard
Q.12 The Lesson TaskMaster application from ChalkBoard has a problem. Every time
the software is installed and loaded on a Windows XP
-
based Dell computer, and the
moment somet
hing is typed followed by a tab, two tabs are inserted instead of one.
What would be the best solution to this problem?
Uninstall and then reinstall Lesson TaskMaster.
Download, install, and apply a patch from Dell.
Page
24
of
26
Download, install, and apply a pa
tch from Microsoft.
Download, install, and apply a patch from ChalkBoard.
Q.13 What Explorer menu option is used to determine the Windows XP version installed
on a computer?
Edit
Help
View
Tools
Favorites
Q.14 Which Windows XP Automatic
Update option allows you to select the time when a
Windows update is executed?
Automatic (recommended).
Install updates from the Windows Update web site.
Notify me but don’t automatically download or install them.
Download updates for me, but let
me choose when to install them.
Q.15 What two items are available from the About Windows option through the
Windows Explorer Help menu? (Choose two.)
a list of troubleshooting links
the end
-
user license agreement
a list of installed hardware devi
ces
the date of the last Windows update
the operating system version number
a list of terms with links to definitions
Q.16 Which operating system patch installation method is used when a user is notified
of a security update for remotely accessing
a computer, but wishes not to install this
patch?
Page
25
of
26
manual
automatic
semi
-
automatic
prompt for permission
Q.17 Which statement is true about installing an operating system on computers in a
networked environment?
The computer name must be unique for all computers on the same network.
The operating system must be the same on all computers on the same network.
The amount of installed RAM must be the same on all computers on the same
network.
The operating syste
m must have the latest patch applied during the installation or it
will not participate in the network.
Q.18 Windows XP has a known problem with specific Intel processors. What is the best
course of action to take in this situation?
Power off the com
puter and reinstall the CPU.
Delete Windows XP and perform a clean install.
Reinstall Windows XP to the same hard drive partition.
Reinstall Windows XP to a different hard drive partition.
Download and install the Windows patch that fixes this prob
lem.
Replace the Intel processor with one that is approved by Microsoft.
Q.19 Which Windows file system is more likely to be used in a business environment?
ext2
ext3
NTFS
FAT16
FAT32
Page
26
of
26
Q.20 You must select an operating system for the facu
lty at a college. All of the
questions below would be logical for you to ask except one. Determine the illogical
question.
How much does the operating system cost and does the college have funding?
Is the technical support staff at the college able to
support the operating systems
being considered?
Do the operating systems being considered have the ability to support the ports
available on the faculty computers?
What types of applications do the faculty use and are they compatible with the
operatin
g systems being considered?
Q.11) A computer in the Advanced Technology Center computer room on the second
floor, room number 217, has the computer name ATC_217_7. What fact is true about
the computer name?
The name is dynamically assigned by the DNS se
rver.
The name is required to allow connectivity to the DHCP server.
The name must include the floor number to support the SLA agreement.
The names of all devices in a workgroup must be the same to allow LAN connectivity.
The name makes it easier for u
sers to reference the device when connecting to it to
share resources
.
Enter the password to open this PDF file:
File name:
-
File size:
-
Title:
-
Author:
-
Subject:
-
Keywords:
-
Creation Date:
-
Modification Date:
-
Creator:
-
PDF Producer:
-
PDF Version:
-
Page Count:
-
Preparing document for printing…
0%
Σχόλια 0
Συνδεθείτε για να κοινοποιήσετε σχόλιο