How in install Network Version The Network Version can be used simultaneously by computers with the Network KeyLocks in the same network group (This falls under the New_PCL PE version.) Currently, one Network KeyLock is set up to be used by 50 users simultaneously. If the simultaneous users exceed 50, then insert one more Network KeyLock for continuous use.

toycutnshootΔίκτυα και Επικοινωνίες

27 Οκτ 2013 (πριν από 3 χρόνια και 7 μήνες)

83 εμφανίσεις

How

in install
Network Version


The
Network Version

can be used simultaneously by computers with the Network KeyLocks in the
same network group (This falls under the New_PCL PE version.)


Currently, one Network KeyLock is set up to be used by 50 users simultaneously.

If the simultaneous users exceed 50,

then insert one more Network KeyLock for continuous use.



1.
How to install
Network KeyLock driver


(
HASPUserSetup
.exe file in the
New_PCL.zip)


You have to install the attached keylock driver into all computers which will use the New PCL PE.

That
means, you have to install it into the computer without the Network KeyLock.


(
HASPUserSetup
.exe file in the New_PCL.zip
)


If possible, please remove the existing keylock driver completely, and install the new driver.




["
How to delete the existing

"
KeyLock driver"
manually
]


(
inst.exe file in the
New_PCL.zip)



1)
Copy the attached
inst.exe

file to C driver
(

c:
\
inst.exe

)
.



2)
Click
the


command prompt


of the sub
-
program.



3)
Enter

c:
\

inst

fr


as shown below and enter



















2.
Add
"NWLink IPX/SPX/NetBios" protocol
.




The
Network Version

is authorized through the computer with the

Network KeyLock
, and



"NWLink IPX/SPX/NetBios" protocol.



Therefore, if the

"NWLink IPX/SPX/NetBios"
is not installed, then yo
u have to install it.

(
for
windows XP

or lower version
)




[
How to install
]




1)
Enter
"
View network connection.
"


2)
Select
"
Local area connection,


and click the right mouse button and click

property.



3) "
Install
"


4)
Select
"
Protocol
"

>"
Add
"


5)
Select
"NWLink IPX/SPX/NetBios" >
Confirm





**
Reference view

**























3.
Please make the name of
Network Group

identical.




Following figure shows the name of network group is identically set up as

workgroup.



Like this, you have to designate same Network Group.