Zen Plus Micro LED 24Vdc - Symmetric ZEN.043.23.US

sentencecopyΗλεκτρονική - Συσκευές

13 Οκτ 2013 (πριν από 3 χρόνια και 9 μήνες)

119 εμφανίσεις

Certified by
Exact Measurements: Metric
Application:
Light Color:
Color Temperature:
Fixture Finish:
Fixture Material:
Diffuser:
Lamp Type:
Lamp Voltage:
Lamp Life:
Number of LEDs:
Total Wattage:
IP Rating:
Width:
Length:
Height:
Weight:
Breaking Strength:
Screws:
End Cap:
Power Supply:
Control Gear:
Optic:
Pitch:
Recessed Fixture for Ceiling,Wall and Furniture
Natural White
4000K
Anodised aluminum
UNI 6060 aluminum alloy extrusion
Transparent Polycarbonate
Micro Signal LED
24Vdc
50,000 hrs at 70% of lamp lumen output with IES
LM-80. For optimized perfomance follow instruction
sheet.
576
47W
IP40
4.39cm / 1 3/4"
152cm / 59 13/16"
1.7cm / 11/16"
650g/m / 10.1oz/ft
IK04
Stainless Steel AISI 316
Stainless Steel
Constant voltage supply 24Vdc dimmable, parallel
connection (Not Included)
Sold separately (see components)
Diffused optics without screen
0.25
Additional Details
Recessed into wall or ceiling; designed for showcases, under shelve, false ceiling
and wall; DMX dimmable; Zen symmetric plus
Zen Plus Micro LED 24Vdc - Symmetric
Model No:
ZEN.043.23.US
Date:

Project:

Fixture Type:

Specifier/Rep:

30 Tycos Dr. Toronto, ON Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319 www.zaneen.com, tech@zaneen.com
Page
1
of
2
Zen Plus Micro LED 24Vdc - Symmetric [ZEN.037.23.US]
-- 52cm / 20 1/2" - 192 Micro LED - 16W - Pitch 0.25 - 3000K
Zen Plus Micro LED 24Vdc - Symmetric [ZEN.041.23.US]
-- 52cm / 20 1/2" - 192 Micro LED - 16W - Pitch 0.25 - 4000K
Zen Plus Micro LED 24Vdc - Symmetric [ZEN.045.23.US]
-- 52cm / 20 1/2" - 192 Micro LED - 16W - Pitch 0.25 - 5000K
Zen Plus Micro LED 24Vdc - Symmetric [ZEN.038.23.US]
-- 102cm / 40 3/16" - 384 Micro LED - 32W - Pitch 0.25 - 3000K
Zen Plus Micro LED 24Vdc - Symmetric [ZEN.042.23.US]
-- 102cm / 40 3/16" - 384 Micro LED - 32W - Pitch 0.25 - 4000K
Zen Plus Micro LED 24Vdc - Symmetric [ZEN.046.23.US]
-- 102cm / 40 3/16" - 384 Micro LED - 32W - Pitch 0.25 - 5000K
Zen Plus Micro LED 24Vdc - Symmetric [ZEN.039.23.US]
-- 152cm / 59 13/16" - 576 Micro LED - 47W - Pitch 0.25 - 3000K
Zen Plus Micro LED 24Vdc - Symmetric [ZEN.047.23.US]
-- 152cm / 59 13/16" - 576 Micro LED - 47W - Pitch 0.25 - 5000K
Zen Plus Micro LED 24Vdc - Symmetric [ZEN.040.23.US]
-- 202cm / 79 1/2" - 768 Micro LED - 63W - Pitch 0.25 - 3000K
Zen Plus Micro LED 24Vdc - Symmetric [ZEN.044.23.US]
-- 202cm / 79 1/2" - 768 Micro LED - 63W - Pitch 0.25 - 4000K
Zen Plus Micro LED 24Vdc - Symmetric [ZEN.048.23.US]
-- 202cm / 79 1/2" - 768 Micro LED - 63W - Pitch 0.25 - 5000K
Available Sizes and / or Lamping

Fixing Spring for False Ceilings [KIT.0122.99]
Fixing Spring for Shelves [MOL.0027.99]
Accessories

DMX /0-10V Control Gear - 24Vdc - 3 Channels [ECO.0038.99]
-- Constant Voltage Dimmable
DMX / 0-10v Multisystem Interface - 4 channels [ECO.0056.99]
Dali/PWM Interface Control Gear - 3 Channels [ECO.0049.99]
DMX Control Gear - 12Vdc [ECO.0054.99]
DMX Control Gear - 110-231Vac - 50Hz [ECO.0048.99]
DMX Splitter - 1 input / 3 Output channels [ECO.0020.99]
USB -DMX / RDM Interface [ECO.0041.99]
Remote Control 24Vdc [ECO.0053.99]
Power Supply - constant voltage 24Vdc - 10W [ALI.0059.99]
-- Main Voltage Constant 24Vdc - 120÷240V - 10W - 50/60Hz
Power Supply - constant voltage 24Vdc - 25W [ALI.0060.99]
-- Main Voltage Constant 24Vdc - 120÷240V - 25W - 50/60Hz
Power Supply - constant voltage 24Vdc - 100W [ALI.0061.99]
-- Main Voltage Constant 24Vdc - 120÷240V - 100W - 50/60Hz
Power Supply - constant voltage 24Vdc - 20W [ALI.0103.99]
-- Main Voltage Constant 24Vdc - 90÷264V - 20W - 50/60Hz
System Components

Zen Micro LED 24Vdc Symmetric
Zen Micro LED 24Vdc Opal
Zen Micro LED 24Vdc Asymmetric
Coordinating Series

Lumen Chart
Photometric File
Power
Color Temperature
Nominal Lumen
Actual Lumen
ZEN.043.XX.US
47W
4000 K
2764.8
1603.44
Zen Plus Micro LED 24Vdc - Symmetric
Model No:
ZEN.043.23.US
Date:

Project:

Fixture Type:

Specifier/Rep:

30 Tycos Dr. Toronto, ON Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319 www.zaneen.com, tech@zaneen.com
Page
2
of
2
Wiring diagrams and electrical connections
Important note:
The new lighting systems,that use light sources in a LED solid state must be
connected to the main voltage through electronic devices that maintain the critical
parameters of operation constant.
With Leds in particular,the current values that pass through the light source
must remain constant and if necessary measurements are not taken to keep
these parameters constant,the LED will tend to absorb higher currents resulting
overheating triggering a vicious mortal cycle of the semiconductor.Because of
this physical-electric phenomenon the systems with LED technology need very
sophisticated control devices compared to the traditional sources.
The current control can be integrated into the power supply or can be placed between
the power supply and the LED system.In this case the Led connection should be
done in series with a maximum quantity of 10/12 Led that can be connected
In the most evolved systems the control electronic can be split and integrated
directly on the PCB together with the Leds;here the connection can be done in
parallel with a 24V dc power supply and without any limit of the quantity of Leds
that can be connected
To facilitate the user in consulting this catalog,in this section there is a list of all
the diagrams of connection between control gears,interfaces and power supplies,
as well as the combination of the correct power supplies/control gear and lighting
systems showing the article codes.
Disclaimer:
Suggested maximum distance from driver:30ft (using 18 AWG solid copper wire)
Distances,type of wiring and gauge must be determined by a certified professional to avoid “voltage drop” problem.
Maximum 9m (30 ft)
Maximum 9m (30 ft)
Parallel connection
Serial connection
Date:____________________________
Fixture Type:______________________
Project:_______________________________
Specifier/Rep:__________________________
R
30 Tycos Drive,Toronto, Ontario, Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319, www.zaneen.com tech@zaneen.com
Wiring Diagram Reference
+
+
+ + + +
+ +
+
+
-
-
-
- - -
- - - -
Wiring diagrams and electrical connections
The new lighting systems,that use light sources in a LED solid state must be
connected to the main voltage through electronic devices that maintain the critical
parameters of operation constant.
With Leds in particular,the current values that pass through the light source
must remain constant and if necessary measurements are not taken to keep
these parameters constant,the LED will tend to absorb higher currents resulting
overheating triggering a vicious mortal cycle of the semiconductor.Because of
this physical-electric phenomenon the systems with LED technology need very
sophisticated control devices compared to the traditional sources.
The current control can be integrated into the power supply or can be placed between
the power supply and the LED system.In this case the Led connection should be
done in series with a maximum quantity of 10/12 Led that can be connected
In the most evolved systems the control electronic can be split and integrated
directly on the PCB together with the Leds;here the connection can be done in
parallel with a 24V dc power supply and without any limit of the quantity of Leds
that can be connected
To facilitate the user in consulting this catalog,in this section there is a list of all
the diagrams of connection between control gears,interfaces and power supplies,
as well as the combination of the correct power supplies/control gear and lighting
systems showing the article codes.
Parallel connection
Serial connection
Date:____________________________
Fixture Type:______________________
Project:_______________________________
Specifier/Rep:__________________________
R
30 Tycos Drive,Toronto, Ontario, Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319, www.zaneen.com tech@zaneen.com
Wiring Diagram Reference
Parallel connection for constant voltage power supplies (non-dimming)
G
Power supply codes
IN
OUT
Power supply
+
-
LED LED LED
DIM DIM DIM
NO DIM NO DIM NO DIM
+ + +
- - -
24Vdc
ALI.0059.99
ALI.0060.99
ALI.0061.99
ALI.0103.99
Date:____________________________
Fixture Type:______________________
Project:_______________________________
Specifier/Rep:__________________________
R
Wiring Diagram Reference
30 Tycos Drive,Toronto, Ontario, Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319, www.zaneen.com tech@zaneen.com