Microsoft Windows 7 NWPrintclient Procedurex

screechingagendaΔίκτυα και Επικοινωνίες

26 Οκτ 2013 (πριν από 3 χρόνια και 11 μήνες)

94 εμφανίσεις

Microsoft Windows
7

NWPrintclient Procedure

1



Microsoft Windows 7 NWPrintclient Procedure

1

What is required?



You will need to obtain the correct printer driver for the printer

that needs to be installed.



After the Novell Client installation, the following file
needs to be copied to

C:
\
Files
:
ftp://ftp.puk.ac.za/Hulplyn/Win7/NWPrintClient/NWPrintCli
ent.exe




NOTE:

You must be logged in to Novell for nwPrintclient to run successfully and to be able to print
.

2

C
onfigure NWPrintclient for Windows 7
:

1.

Execute C:
\
Files
\
NWPrintClient.exe on the local computer. This will install and copy the necessary files
to

the correct location
s
.

2.

Click on Allow access in the Windows Security Alert window to allow the NWPrintclient.exe to
communicate through the firewall.

3.

To make sure the NWPrintClient is running, look for this icon
in the taskbar notification area (bottom
of the screen, right side of the taskbar)
.
If it is not there, go to the C:
\
Files
\
NWPrintclient
\

folder and
execute

nwPrintCl
ient.exe to start the program.


4.

Now instal
l the printer driver

by clicking on the
START
button,
Devices and Printers
and
Add a
printer

on the top of the screen.

5.

On the nex
t

screen
,

click on
Add a local printer
.

6.

Click
Create a new port
,

cl
ick the dropdown box next to it

and select
Standard TCP/IP Port
.

Click next to continue.

7.

In the
Hostname or IP address

box type:
127.0.0.1

8.

In the
Port name

box type the printer name of the user’s printer.
This will usually be in the format of
p
-
xxxxx
.
Click
Next

to continue.

9.

The wizard will detect TCP/IP and printer settings. Wait for the
Additional port information required

screen and click
on
Custom

and
then on
Settings
.

10.

At the protocol section select
LPR
. Now configure the
LPR Settings

by filling in the Novell queue name
(FQDN) of the printer (ie:
p
-
xxxxx.xxx.p.pcm.puknet)
. Make sure the
LPR Byte Counting Enabled
tickbox is marked. Click
OK
.

11.

On the
Install printer driver

screen click
Have disk

and browse to the correct printer driver for the
user’s printer. Select the correct printer

driver

and click
Next
.
Change

the printer name to
the same
name as used in point 8.

Microsoft Windows
7

NWPrintclient Procedure

2

12.

Click
Next
and finally click
Finish
. The

printer should be installed

and
further

configuration on the driver
can be done now

(ie. Printer Accessories/Options, Paper settings, Valid Access code, etc)
.



Original details:
Stephan

d:
\
itc
\
win7
\
prosedures
\
done
\
microsoft windows 7 nwprintclient procedure.docx

2010
-
06
-
03