Changing a Computer's IP Address

screechingagendaΔίκτυα και Επικοινωνίες

26 Οκτ 2013 (πριν από 3 χρόνια και 7 μήνες)

65 εμφανίσεις

Changing a
C
omputer’
s IP A
ddress

1.

Click on Start and select Control Panel

2.

Open Network and Internet Connections

3.

Click on Network Connections in the pick a Control Panel icon section

4.

Right click on the network card you want to change (usually Local Area
Connection) and select properties

5.

In the This connection uses the following items Box find Internet Protocol (TCP/IP). Select it and click the
Properties button

6.

Select Use the following IP address

7.

Enter 192.168.1.20 for the IP Address (or the address you h
ave been provided with)

8.

Make sure the subnet mask is 255.255.255.0

9.

The Default Gateway and Preferred DNS server can remain blank, unless you need internet access. If you
do nned these, you will ne to find the values from the networking person.

10.

Click OK and

OK to close the settings out.

Changing the Audia Software

To select the Network Card Used:

1.

Open the Audia software and click on the Tools menu

2.

Select the Options Menu item

3.

Click on the Networking tab

4.

In the Default N
etwork
I
nterface
C
ard

section, click on

the Select NIC Button. Note if you only have one
network card enabled, this button will be inactive.

5.

In the popup list of Network Cards, double click on the one you want to use.

6.

Click OK

To change from UDP Broadcast to TCP Selection

1.

Open the Audia Softwar
e and click on the Tools menu

2.

Select the Options Menu item

3.

Click on the Networking tab

4.

In the
Network Device

D
iscovery Method section, select TCP

User Supplied Device List

5.

Cl
i
c
k on the
Edit Device List

button to bring up the
Network
Subnet
List

window

6.

If
the subnet you want is not there, or you would like a second copy of the subnet click Add

7.

In the blank line in the list, double click on the Subnet address box and enter your subnet (this is the first 3
numbers in your subnet address


not the subnet mask)

i.e. 192.168.1

8.

Click Edit Nodes

9.

In the Select Nodes for Subnet window, click on the IP addresses you want to access

10.

Click OK

11.

If you have more than one entry in the Network Subnet List, make sure you have a check in the Default
box next to the subnet you w
ant to use.

12.

Click OK

13.

Click OK


Troubles
hooting

If you are having trouble connecting to your Audia, there are a few utilities you can use to help
determine why

IPCONFIG

To see what IP address your machine has do the following:

1.

Click on Start, select All
Programs. Go to Accessories and select Command Prompt

2.

This will bring up a dos windows with a C:
\
>prompt

3.

Type IPCONFIG and hit ENTER

4.

You will see a list of your adaptors and their IP addresses

5.

If you see an adaptor that is not configured correctly, make su
re it is the one you are trying to use. It is
common for wireless adaptors to show Media Disconnected when you are using a wired connection

6.

The specific things you are looking for are Media Disconnected, and IP address of 0.0.0.0 or an IP address
that star
ts with 169.254.

7.

If you see Media Disconnected, check your cables

8.

If you see an IP address of 0.0.0.0, either reboot your computer or go to the Network Configuration
section in Windows (see above) and right click on the card to select Repair

9.

If you see an
IP address that starts with 169.254, you are still configured to use DHCP. Follow the
instructions in Changing a Computer’s IP Address above

PING

If you have a valid IP address, you can check your connectivity by using the PING command

1.

Click on Start, sele
ct All Programs. Go to Accessories and select Command Prompt

2.

This will bring up a dos windows with a C:
\
>prompt

3.

Type PING
IP_Address

and hit ENTER (i.e.: PING 192.168.1.101)

4.

If you see 4 replies with TIME= in them, you can see the Audia.

5.

If you see Request Timed Out, that means you cannot see the Audia.

6.

If you see Destination host unreachable, double check your IP address as there is probably a typo.

7.

If you can PING the Audia, but still cannot connect using the Audia software, there is pro
bably a firewall
blocking you

8.

If you can’t ping the Audia, double check all your IP addresses and make sure you are on the same
network as the Audia