Embedded Based Drip Irrigation System
To design a
system to irrigate the field based
In order to
automate the water irrigation system for fields, here
we submit concept using embedded system. In this system, the wet
condition in the field is sensed by conductive probe. If the wetness of
the field is not enough, the microcontroller based systems
on the motor and starts the field irrigation system
. At the same time,
automatic motor pump is switched on to fill the water in the field.
The wetness in the field is reached to reasonable condition the motor
pump is automatically switched off.
is we transmit the signal to valve using ISM frequency. By
using this we can avoid unwanted wire length traveling from one
end to other.
ISM reduce the wiring cost.
Wire cut can be reduced which reduce maintaining cost.
The auto irrigation s
ystem continuously monitoring the
wetness of the field and maintain the wetness by auto
This system provide tension free atmosphere to formers.
The auto switching systems continuously maintain the wetness
of the field in correct level.
totally reduce the manual risk
We can use this system all type of fields.