ARTIFICIAL NEURAL
NETWORKS
METHODOLOGICAL
ADVANCES AND
BIOMEDICAL
APPLICATIONS
Edited by Kenji Suzuki
Artificial Neural Networks
 Methodological Advances and Biomedical Applications
Edited by Kenji Suzuki
Published by InTech
Janeza Trdine 9, 51000 Rijeka, Croatia
Copyright © 2011 InTech
All chapters are Open Access articles distributed under the Creative Commons
Non Commercial Share Alike Attribution 3.0 license, which permits to copy,
distribute, transmit, and adapt the work in any medium, so long as the original
work is properly cited. After this work has been published by InTech, authors
have the right to republish it, in whole or part, in any publication of which they
are the author, and to make other personal use of the work. Any republication,
referencing or personal use of the work must explicitly identify the original source.
Statements and opinions expressed in the chapters are these of the individual contributors
and not necessarily those of the editors or publisher. No responsibility is accepted
for the accuracy of information contained in the published articles. The publisher
assumes no responsibility for any damage or injury to persons or property arising out
of the use of any materials, instructions, methods or ideas contained in the book.
Publishing Process Manager Ivana Lorkovic
Technical Editor Teodora Smiljanic
Cover Designer Martina Sirotic
Image Copyright Bruce Rolff, 2010. Used under license from Shutterstock.com
First published March, 2011
Printed in India
A free online edition of this book is available at www.intechopen.com
Additional hard copies can be obtained from orders@intechweb.org
Artificial Neural Networks  Methodological Advances and Biomedical Applications
Edited by Kenji Suzuki
p. cm.
ISBN 9789533072432
free online editions of InTech
Books and Journals can be found at
www.intechopen.com
Part 1
Chapter 1
Chapter 2
Chapter 3
Part 2
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Preface IX
Fundamentals 1
Introduction to the Artificial Neural Networks 3
Andrej Krenker, Janez Bešter and Andrej Kos
Review of Input Variable Selection Methods
for Artificial Neural Networks 19
Robert May, Graeme Dandy and Holger Maier
Artificial Neural Networks
and Efficient Optimization Techniques
for Applications in Engineering 45
Rossana M. S. Cruz, Helton M. Peixoto and Rafael M. Magalhães
Advanced Architectures for Biomedical Applications 69
PixelBased Artificial Neural Networks
in ComputerAided Diagnosis 71
Kenji Suzuki
Applied Artificial Neural Networks:
from Associative Memories to Biomedical Applications 93
Mahmood Amiri and Katayoun Derakhshandeh
Medical Image Segmentation
Using Artificial Neural Networks 121
Mostafa Jabarouti Moghaddam and Hamid SoltanianZadeh
Artificial Neural Networks and Predictive Medicine:
a Revolutionary Paradigm Shift 139
Enzo Grossi
ReputationBased Neural Network Combinations 151
Mohammad Nikjoo, Azadeh Kushki, Joon Lee,
Catriona Steele and Tom Chau
Contents
Contents
VI
Biological Applications 171
Prioritising Genes with an Artificial Neural Network
Comprising Medical Documents to Accelerate
Positional Cloning in Biological Research 173
Norio Kobayashi and Tetsuro Toyoda
Artificial Neural Networks Technology
to Model and Predict Plant Biology Process 197
Pedro P. Gallego, Jorge Gago and Mariana Landín
The Usefulness of Artificial Neural Networks in Predicting
the Outcome of Hematopoietic Stem Cell Transplantation 217
Giovanni Caocci, Roberto Baccoli and Giorgio La Nasa
Artificial Neural Networks
and Retinal Ganglion Cell Responses 233
María P. Bonomini, José M. Ferrández and Eduardo Fernández
Medical Applications 251
Diagnosing Skin Diseases
Using an Artificial Neural Network 253
Bakpo, F. S. and Kabari, L. G
Artificial Neural Networks
Used to Study the Evolution of the Multiple Sclerosis 271
Tabares Ospina and Hector Anibal
Estimation the Depth of Anesthesia
by the Use of Artificial Neural Network 283
Hossein Rabbani, Alireza Mehri Dehnavi and Mehrab Ghanatbari
Artificial Neural Networks (ANN) Applied
for Gait Classification and Physiotherapy
Monitoring in Post Stroke Patients 303
Katarzyna Kaczmarczyk, Andrzej Wit,
Maciej Krawczyk, Jacek Zaborski and Józef Piłsudski
Clinical and Other Applications 329
Forcasting the Clinical Outcome: Artificial Neural
Networks or Multivariate Statistical Models? 331
Ahmed Akl and Mohamed A Ghoneim
Telecare Adoption Model Based
on Artificial Neural Networks 343
JuiChen Huang
Part 3
Chapter 9
Chapter 10
Chapter 11
Chapter 12
Part 4
Chapter 13
Chapter 14
Chapter 15
Chapter 16
Part 5
Chapter 17
Chapter 18
Contents
VII
Effectiveness of Artificial Neural Networks
in Forecasting Failure Risk for PreMedical Students 355
Jawaher K. Alenezi, Mohammed M. Awny
and Maged M. M. Fahmy
Chapter 19
Preface
Artiﬁ cial neural networks may probably be the single most successful technology in
the last two decades which has been widely used in a large variety of applications
in various areas. An artiﬁ cial neural network, oft en just called a neural network, is a
mathematical (or computational) model that is inspired by the structure and function
of biological neural networks in the brain. An artiﬁ cial neural network consists of a
number of artiﬁ cial neurons (i.e., nonlinear processing units) which are connected each
other via synaptic weights (or simply just weights). An artiﬁ cial neural network can
“learn” a task by adjusting weights. There are supervised and unsupervised models.
A supervised model requires a “teacher” or desired (ideal) output to learn a task. An
unsupervised model does not require a “teacher,” but it leans a task based on a cost
function associated with the task. An artiﬁ cial neural network is a powerful, versatile
tool. Artiﬁ cial neural networks have been successfully used in various applications
such as biological, medical, industrial, control engendering, soft ware engineering,
environmental, economical, and social applications. The high versatility of artiﬁ cial
neural networks comes from its high capability and learning function. It has been
theoretically proved that an artiﬁ cial neural network can approximate any continu
ous mapping by arbitrary precision. Desired continuous mapping or a desired task is
acquired in an artiﬁ cial neural network by learning.
The purpose of this book series is to provide recent advances of artiﬁ cial neural net
work applications in a wide range of areas. The series consists of two volumes: the ﬁ rst
volume contains methodological advances and biomedical applications of artiﬁ cial
neural networks; the second volume contains artiﬁ cial neural network applications in
industrial and control engineering.
This ﬁ rst volume begins with a section of fundamentals of artiﬁ cial neural networks
which covers an introduction, design, and optimization of artiﬁ cial neural networks.
The fundamental concept, principles, and theory in the section help understand and
use an artiﬁ cial neural network in a speciﬁ c application properly as well as eﬀ ectively.
A section of advanced architectures for biomedical applications follows. Researchers
have developed advanced architectures for artiﬁ cial neural networks speciﬁ cally for
biomedical applications. Such advanced architectures oﬀ er improved performance
and desirable properties. Sections continue with biological applications such as gene,
plant biology, and stem cell, medical applications such as skin diseases, sclerosis, anes
thesia, and physiotherapy, and clinical and other applications such as clinical outcome,
telecare, and premed student failure prediction.
X
Preface
Thus, this book will be a fundamental source of recent advances and applications of
artiﬁ cial neural networks in biomedical areas. The target audience of this book in
cludes professors, college students, and graduate students in engineering and medical
schools, engineers in biomedical companies, researchers in biomedical and health sci
ences, medical doctors such as radiologists, cardiologists, pathologists, and surgeons,
healthcare professionals such as radiology technologists and medical physicists. I hope
this book will be a useful source for readers and inspire them.
Kenji Suzuki, Ph.D.
University of Chicago
Chicago, Illinois,
USA
Part 1
Fundamentals
1
Introduction to the Artificial Neural Networks
Andrej Krenker
1
, Janez Bešter
2
and Andrej Kos
2
1
Consalta d.o.o.
2
Faculty of Electrical Engineering, University of Ljubljana
Slovenia
1. Introduction
An Artificial Neural Network (ANN) is a mathematical model that tries to simulate the
structure and functionalities of biological neural networks. Basic building block of every
artificial neural network is artificial neuron, that is, a simple mathematical model (function).
Such a model has three simple sets of rules: multiplication, summation and activation. At
the entrance of artificial neuron the inputs are weighted what means that every input value
is multiplied with individual weight. In the middle section of artificial neuron is sum
function that sums all weighted inputs and bias. At the exit of artificial neuron the sum of
previously weighted inputs and bias is passing trough activation function that is also called
transfer function (Fig. 1.).
Fig. 1. Working principle of an artificial neuron.
Artificial Neural Networks  Methodological Advances and Biomedical Applications
4
Although the working principles and simple set of rules of artificial neuron looks like
nothing special the full potential and calculation power of these models come to life when
we start to interconnect them into artificial neural networks (Fig. 2.). These artificial neural
networks use simple fact that complexity can grown out of merely few basic and simple
rules.
Fig. 2. Example of simple artificial neural network.
In order to fully harvest the benefits of mathematical complexity that can be achieved
through interconnection of individual artificial neurons and not just making system
complex and unmanageable we usually do not interconnect these artificial neurons
randomly. In the past, researchers have come up with several “standardised” topographies
of artificial neural networks. These predefined topographies can help us with easier, faster
and more efficient problem solving. Different types of artificial neural network topographies
are suited for solving different types of problems. After determining the type of given
problem we need to decide for topology of artificial neural network we are going to use and
then finetune it. We need to finetune the topology itself and its parameters.
Fine tuned topology of artificial neural network does not mean that we can start using our
artificial neural network, it is only a precondition. Before we can use our artificial neural
network we need to teach it solving the type of given problem. Just as biological neural
networks can learn their behaviour/responses on the basis of inputs that they get from their
environment the artificial neural networks can do the same. There are three major learning
paradigms: supervised learning, unsupervised learning and reinforcement learning. We
choose learning paradigm similar as we chose artificial neuron network topography  based
on the problem we are trying to solve. Although learning paradigms are different in their
principles they all have one thing in common; on the basis of “learning data” and “learning
rules” (chosen cost function) artificial neural network is trying to achieve proper output
response in accordance to input signals.
After choosing topology of an artificial neural network, finetuning of the topology and
when artificial neural network has learn a proper behaviour we can start using it for solving
given problem. Artificial neural networks have been in use for some time now and we can
find them working in areas such as process control, chemistry, gaming, radar systems,
automotive industry, space industry, astronomy, genetics, banking, fraud detection, etc. and
solving of problems like function approximation, regression analysis, time series prediction,
classification, pattern recognition, decision making, data processing, filtering, clustering,
etc., naming a few.
Introduction to the Artificial Neural Networks
5
As topic of artificial neural networks is complex and this chapter is only informative nature
we encourage novice reader to find detail information on artificial neural networks in
(Gurney, 1997; Kröse & Smagt 1996; Pavešić, 2000; Rojas 1996).
2. Artificial neuron
Artificial neuron is a basic building block of every artificial neural network. Its design and
functionalities are derived from observation of a biological neuron that is basic building
block of biological neural networks (systems) which includes the brain, spinal cord and
peripheral ganglia. Similarities in design and functionalities can be seen in Fig.3. where the
left side of a figure represents a biological neuron with its soma, dendrites and axon and
where the right side of a figure represents an artificial neuron with its inputs, weights,
transfer function, bias and outputs.
Fig. 3. Biological and artificial neuron design.
In case of biological neuron information comes into the neuron via dendrite, soma processes
the information and passes it on via axon. In case of artificial neuron the information comes
into the body of an artificial neuron via inputs that are weighted (each input can be
individually multiplied with a weight). The body of an artificial neuron then sums the
weighted inputs, bias and “processes” the sum with a transfer function. At the end an
artificial neuron passes the processed information via output(s). Benefit of artificial neuron
model simplicity can be seen in its mathematical description below:
ݕሺ݇ሻ ൌ ܨ ൭ݓ
ሺ݇ሻ · ݔ
ሺ݇ሻ
ୀ
ܾ൱
(1)
Where:
• ݔ
ሺ݇ሻ is input value in discrete time ݇ where ݅ goes from 0 to ݉,
• ݓ
ሺ݇ሻ is weight value in discrete time ݇ where ݅ goes from 0 to ݉,
• ܾ is bias,
• ܨ is a transfer function,
• ݕ
ሺ݇ሻ is output value in discrete time ݇.
As seen from a model of an artificial neuron and its equation (1) the major unknown
variable of our model is its transfer function. Transfer function defines the properties of
artificial neuron and can be any mathematical function. We choose it on the basis of
problem that artificial neuron (artificial neural network) needs to solve and in most cases we
choose it from the following set of functions: Step function, Linear function and Nonlinear
(Sigmoid) function.
Artificial Neural Networks  Methodological Advances and Biomedical Applications
6
Step function is binary function that has only two possible output values (e.g. zero and one).
That means if input value meets specific threshold the output value results in one value and
if specific threshold is not meet that results in different output value. Situation can be
described with equation (2).
ݕ ൌ ൜
1 ݂݅ ݓ
ݔ
ݐ݄ݎ݁ݏ݄݈݀
0 ݂݅ ݓ
ݔ
൏ ݐ݄ݎ݁ݏ݄݈݀
(2)
When this type of transfer function is used in artificial neuron we call this artificial neuron
perceptron. Perceptron is used for solving classification problems and as such it can be most
commonly found in the last layer of artificial neural networks. In case of linear transfer
function artificial neuron is doing simple linear transformation over the sum of weighted
inputs and bias. Such an artificial neuron is in contrast to perceptron most commonly used
in the input layer of artificial neural networks. When we use nonlinear function the sigmoid
function is the most commonly used. Sigmoid function has easily calculated derivate, which
can be important when calculating weight updates in the artificial neural network.
3. Artificial Neural Networks
When combining two or more artificial neurons we are getting an artificial neural network.
If single artificial neuron has almost no usefulness in solving reallife problems the artificial
neural networks have it. In fact artificial neural networks are capable of solving complex
reallife problems by processing information in their basic building blocks (artificial
neurons) in a nonlinear, distributed, parallel and local way.
The way that individual artificial neurons are interconnected is called topology, architecture
or graph of an artificial neural network. The fact that interconnection can be done in
numerous ways results in numerous possible topologies that are divided into two basic
classes. Fig. 4. shows these two topologies; the left side of the figure represent simple feed
forward topology (acyclic graph) where information flows from inputs to outputs in only
one direction and the right side of the figure represent simple recurrent topology (semi
cyclic graph) where some of the information flows not only in one direction from input to
output but also in opposite direction. While observing Fig. 4. we need to mention that for
easier handling and mathematical describing of an artificial neural network we group
individual neurons in layers. On Fig. 4. we can see input, hidden and output layer.
Fig. 4. Feedforward (FNN) and recurrent (RNN) topology of an artificial neural network.
Introduction to the Artificial Neural Networks
7
When we choose and build topology of our artificial neural network we only finished half of
the task before we can use this artificial neural network for solving given problem. Just as
biological neural networks need to learn their proper responses to the given inputs from the
environment the artificial neural networks need to do the same. So the next step is to learn
proper response of an artificial neural network and this can be achieved through learning
(supervised, unsupervised or reinforcement learning). No matter which method we use, the
task of learning is to set the values of weight and biases on basis of learning data to
minimize the chosen cost function.
3.1 Feedforward Artificial Neural Networks
Artificial neural network with feedforward topology is called FeedForward artificial neural
network and as such has only one condition: information must flow from input to output in
only one direction with no backloops. There are no limitations on number of layers, type of
transfer function used in individual artificial neuron or number of connections between
individual artificial neurons. The simplest feedforward artificial neural network is a single
perceptron that is only capable of learning linear separable problems. Simple multilayer
feedforward artificial neural network for purpose of analytical description (sets of
equations (3), (4) and (5)) is shown on Fig. 5.
݊
ଵ
ൌ ܨ
ଵ
ሺ
ݓ
ଵ
ݔ
ଵ
ܾ
ଵ
ሻ
݊
ଶ
ൌ ܨ
ଶ
ሺ
ݓ
ଶ
ݔ
ଶ
ܾ
ଶ
ሻ
݊
ଷ
ൌ ܨ
ଶ
ሺ
ݓ
ଶ
ݔ
ଶ
ܾ
ଶ
ሻ
݊
ସ
ൌ ܨ
ଷ
ሺ
ݓ
ଷ
ݔ
ଷ
ܾ
ଷ
ሻ
(3)
݉
ଵ
ൌ ܨ
ସ
ሺ
ݍ
ଵ
݊
ଵ
ݍ
ଶ
݊
ଶ
ܾ
ସ
ሻ
݉
ଶ
ൌ ܨ
ହ
ሺ
ݍ
ଷ
݊
ଷ
ݍ
ସ
݊
ସ
ܾ
ହ
ሻ
ݕ ൌ ܨ
ሺ
ݎ
ଵ
݉
ଵ
ݎ
ଶ
݉
ଶ
ܾ
ሻ
(4)
ݕ ൌ ܨ
ݎ
ଵ
൫ܨ
ସ
ൣݍ
ଵ
ܨ
ଵ
ሾ
ݓ
ଵ
ݔ
ଵ
ܾ
ଵ
ሿ
ݍ
ଶ
ܨ
ଶ
ሾ
ݓ
ଶ
ݔ
ଶ
ܾ
ଶ
ሿ
൧ ܾ
ସ
൯ ڮ
…ݎ
ଶ
ሺ
ܨ
ହ
ሾ
ݍ
ଷ
ܨ
ଶ
ሾ
ݓ
ଶ
ݔ
ଶ
ܾ
ଶ
ሿ
ݍ
ସ
ܨ
ଷ
ሾ
ݓ
ଷ
ݔ
ଷ
ܾ
ଷ
ሿ
ܾ
ହ
ሿ
ሻ
ܾ
(5)
Fig. 5. Feedforward artificial neural network.
Artificial Neural Networks  Methodological Advances and Biomedical Applications
8
As seen on Fig. 5 and corresponding analytical description with sets of equations (3), (4) and
(5) the simple feedforward artificial neural network can led to relatively long mathematical
descriptions where artificial neural networks’ parameters optimization problem solving by
hand is impractical. Although analytical description can be used on any complex artificial
neural network in practise we use computers and specialised software that can help us
build, mathematically describe and optimise any type of artificial neural network.
3.2 Recurrent Artificial Neural Networks
Artificial neural network with the recurrent topology is called Recurrent artificial neural
network. It is similar to feedforward neural network with no limitations regarding back
loops. In these cases information is no longer transmitted only in one direction but it is also
transmitted backwards. This creates an internal state of the network which allows it to
exhibit dynamic temporal behaviour. Recurrent artificial neural networks can use their
internal memory to process any sequence of inputs. Fig. 6. shows small Fully Recurrent
artificial neural network and complexity of its artificial neuron interconnections.
The most basic topology of recurrent artificial neural network is fully recurrent artificial
network where every basic building block (artificial neuron) is directly connected to every
other basic building block in all direction. Other recurrent artificial neural networks such as
Hopfield, Elman, Jordan, bidirectional and other networks are just special cases of recurrent
artificial neural networks.
Fig. 6. Fully recurrent artificial neural network.
3.3 Hopfield Artificial Neural Network
A Hopfield artificial neural network is a type of recurrent artificial neural network that is
used to store one or more stable target vectors. These stable vectors can be viewed as
memories that the network recalls when provided with similar vectors that act as a cue to
the network memory. These binary units only take two different values for their states that
are determined by whether or not the units' input exceeds their threshold. Binary units can
take either values of 1 or 1, or values of 1 or 0. Consequently there are two possible
definitions for binary unit activation ܽ
(equation (6) and (7)):
Introduction to the Artificial Neural Networks
9
ܽ
ൌ ൝
െ1 ݂݅ ݓ
ݏ
ߠ
,
1 ݐ݄݁ݎݓ݅ݏ݁.
(6)
ܽ
ൌ ൝
0 ݂݅ ݓ
ݏ
ߠ
,
1 ݐ݄݁ݎݓ݅ݏ݁.
(7)
Where:
• ݓ
is the strength of the connection weight from unit j to unit i,
• ݏ
is the state of unit j,
• ߠ
is the threshold of unit i.
While talking about connections ݓ
we need to mention that there are typical two
restrictions: no unit has a connection with itself (ݓ
) and that connections are symmetric
ݓ
ൌ ݓ
.
The requirement that weights must be symmetric is typically used, as it will guarantee that
the energy function decreases monotonically while following the activation rules. If non
symmetric weights are used the network may exhibit some periodic or chaotic behaviour.
Training a Hopfield artificial neural network (Fig. 7.) involves lowering the energy of states
that the artificial neural network should remember.
Fig. 7. Simple “one neuron” Hopfield artificial neural network.
3.4 Elman and Jordan Artificial Neural Networks
Elman network also referred as Simple Recurrent Network is special case of recurrent artificial
neural networks. It differs from conventional twolayer networks in that the first layer has a
recurrent connection. It is a simple threelayer artificial neural network that has backloop
from hidden layer to input layer trough so called context unit (Fig. 8.). This type of artificial
neural network has memory that allowing it to both detect and generate timevarying
patterns.
The Elman artificial neural network has typically sigmoid artificial neurons in its hidden
layer, and linear artificial neurons in its output layer. This combination of artificial neurons
transfer functions can approximate any function with arbitrary accuracy if only there is
enough artificial neurons in hidden layer. Being able to store information Elman artificial
neural network is capable of generating temporal patterns as well as spatial patterns and
Artificial Neural Networks  Methodological Advances and Biomedical Applications
10
responding on them. Jordan network (Fig. 9.) is similar to Elman network. The only
difference is that context units are fed from the output layer instead of the hidden layer.
Fig. 8. Elman artificial neural network.
Fig. 9. Jordan artificial neural network.
3.5 Long Short Term Memory
Long Short Term Memory is one of the recurrent artificial neural networks topologies. In
contrast with basic recurrent artificial neural networks it can learn from its experience to
process, classify and predict time series with very long time lags of unknown size between
important events. This makes Long Short Term Memory to outperform other recurrent
artificial neural networks, Hidden Markov Models and other sequence learning methods.
Long Short Term Memory artificial neural network is build from Long Short Term Memory
blocks that are capable of remembering value for any length of time. This is achieved with
gates that determine when the input is significant enough remembering it, when continue to
remembering or forgetting it, and when to output the value.
Architecture of Long Short Term Memory block is shown in Fig. 10 where input layer
consists of sigmoid units. Top neuron in the input layer process input value that might be
Introduction to the Artificial Neural Networks
11
sent to a memory unit depends on computed value of second neuron from the top in the
input layer. The third neuron from the top in the input layer decide how long will memory
unit hold (remember) its value and the bottom most neuron determines when value from
memory should be released to the output. Neurons in first hidden layer and in output layer
are doing simple multiplication of their inputs and a neuron in the second hidden layer
computes simple linear function of its inputs. Output of the second hidden layer is fed back
into input and first hidden layer in order to help making decisions.
Fig. 10. Simple Long Short Term Memory artificial neural network (block).
3.6 Bidirectional Artificial Neural Networks (BiANN)
Bidirectional artificial neural networks (Fig. 11.) are designed to predict complex time series.
They consist of two individual interconnected artificial neural (sub) networks that performs
direct and inverse (bidirectional) transformation. Interconnection of artificial neural sub
networks is done through two dynamic artificial neurons that are capable of remembering
their internal states. This type of interconnection between future and past values of the
processed signals increase time series prediction capabilities. As such these artificial neural
networks not only predict future values of input data but also past values. That brings need
for two phase learning; in first phase we teach one artificial neural sub network for
predicting future and in the second phase we teach a second artificial neural sub network
for predicting past.
3.7 SelfOrganizing Map (SOM)
Selforganizing map is an artificial neural network that is related to feedforward networks
but it needs to be told that this type of architecture is fundamentally different in
arrangement of neurons and motivation. Common arrangement of neurons is in a hexagonal
or rectangular grid (Fig. 12.). Selforganizing map is different in comparison to other
artificial neural networks in the sense that they use a neighbourhood function to preserve
the topological properties of the input space. They uses unsupervised learning paradigm to
Artificial Neural Networks  Methodological Advances and Biomedical Applications
12
produce a lowdimensional, discrete representation of the input space of the training
samples, called a map what makes them especially useful for visualizing lowdimensional
views of highdimensional data. Such networks can learn to detect regularities and
correlations in their input and adapt their future responses to that input accordingly.
Fig. 11. Bidirectional artificial neural network.
Fig. 12. Selforganizing Map in rectangular (left) and hexagonal (right) grid.
Introduction to the Artificial Neural Networks
13
Just as others artificial neural networks need learning before they can be used the same goes
for selforganizing map; where the goal of learning is to cause different parts of the artificial
neural network to respond similarly to certain input patterns. While adjusting the weights
of the neurons in the process of learning they are initialized either to small random values or
sampled evenly from the subspace spanned by the two largest principal component
eigenvectors. After initialization artificial neural network needs to be fed with large number
of example vectors. At that time Euclidean distance to all weight vectors is computed and
the neuron with weight vector most similar to the input is called the best matching unit. The
weights of the best matching unit and neurons close to it are adjusted towards the input
vector. This process is repeated for each input vector for a number of cycles. After learning
phase we do socalled mapping (usage of artificial neural network) and during this phase
the only one neuron whose weight vector lies closest to the input vector will be winning
neuron. Distance between input and weight vector is again determined by calculating the
Euclidean distance between them.
3.8 Stochastic Artificial Neural Network
Stochastic artificial neural networks are a type of an artificial intelligence tool. They are built
by introducing random variations into the network, either by giving the network's neurons
stochastic transfer functions, or by giving them stochastic weights. This makes them useful
tools for optimization problems, since the random fluctuations help it escape from local
minima. Stochastic neural networks that are built by using stochastic transfer functions are
often called Boltzmann machine.
3.9 Physical Artificial Neural Network
Most of the artificial neural networks today are softwarebased but that does not exclude the
possibility to create them with physical elements which base on adjustable electrical current
resistance materials. History of physical artificial neural networks goes back in 1960’s when
first physical artificial neural networks were created with memory transistors called
memistors. Memistors emulate synapses of artificial neurons. Although these artificial
neural networks were commercialized they did not last for long due to their incapability for
scalability. After this attempt several others followed such as attempt to create physical
artificial neural network based on nanotechnology or phase change material.
4. Learning
There are three major learning paradigms; supervised learning, unsupervised learning and
reinforcement learning. Usually they can be employed by any given type of artificial neural
network architecture. Each learning paradigm has many training algorithms.
4.1 Supervised learning
Supervised learning is a machine learning technique that sets parameters of an artificial
neural network from training data. The task of the learning artificial neural network is to set
the value of its parameters for any valid input value after having seen output value. The
training data consist of pairs of input and desired output values that are traditionally
represented in data vectors. Supervised learning can also be referred as classification, where
we have a wide range of classifiers, each with its strengths and weaknesses. Choosing a
Artificial Neural Networks  Methodological Advances and Biomedical Applications
14
suitable classifier (Multilayer perceptron, Support Vector Machines, knearest neighbour
algorithm, Gaussian mixture model, Gaussian, naive Bayes, decision tree, radial basis
function classifiers,…) for a given problem is however still more an art than a science.
In order to solve a given problem of supervised learning various steps has to be considered.
In the first step we have to determine the type of training examples. In the second step we
need to gather a training data set that satisfactory describe a given problem. In the third step
we need to describe gathered training data set in form understandable to a chosen artificial
neural network. In the fourth step we do the learning and after the learning we can test the
performance of learned artificial neural network with the test (validation) data set. Test data
set consist of data that has not been introduced to artificial neural network while learning.
4.2 Unsupervised learning
Unsupervised learning is a machine learning technique that sets parameters of an artificial
neural network based on given data and a cost function which is to be minimized. Cost
function can be any function and it is determined by the task formulation. Unsupervised
learning is mostly used in applications that fall within the domain of estimation problems
such as statistical modelling, compression, filtering, blind source separation and clustering.
In unsupervised learning we seek to determine how the data is organized. It differs from
supervised learning and reinforcement learning in that the artificial neural network is given
only unlabeled examples. One common form of unsupervised learning is clustering where
we try to categorize data in different clusters by their similarity. Among above described
artificial neural network models, the Selforganizing maps are the ones that the most
commonly use unsupervised learning algorithms.
4.3 Reinforcement learning
Reinforcement learning is a machine learning technique that sets parameters of an artificial
neural network, where data is usually not given, but generated by interactions with the
environment. Reinforcement learning is concerned with how an artificial neural network
ought to take actions in an environment so as to maximize some notion of longterm reward.
Reinforcement learning is frequently used as a part of artificial neural network’s overall
learning algorithm.
After return function that needs to be maximized is defined, reinforcement learning uses
several algorithms to find the policy which produces the maximum return. Naive brute
force algorithm in first step calculates return function for each possible policy and chooses
the policy with the largest return. Obvious weakness of this algorithm is in case of extremely
large or even infinite number of possible policies. This weakness can be overcome by value
function approaches or direct policy estimation. Value function approaches attempt to find a
policy that maximizes the return by maintaining a set of estimates of expected returns for
one policy; usually either the current or the optimal estimates. These methods converge to
the correct estimates for a fixed policy and can also be used to find the optimal policy.
Similar as value function approaches the direct policy estimation can also find the optimal
policy. It can find it by searching it directly in policy space what greatly increases the
computational cost.
Reinforcement learning is particularly suited to problems which include a longterm versus
shortterm reward tradeoff. It has been applied successfully to various problems, including
Introduction to the Artificial Neural Networks
15
robot control, telecommunications, and games such as chess and other sequential decision
making tasks.
5. Usage of Artificial Neural Networks
One of the greatest advantages of artificial neural networks is their capability to learn from
their environment. Learning from the environment comes useful in applications where
complexity of the environment (data or task) make implementations of other type of
solutions impractical. As such artificial neural networks can be used for variety of tasks like
classification, function approximation, data processing, filtering, clustering, compression,
robotics, regulations, decision making, etc. Choosing the right artificial neural network
topology depends on the type of the application and data representation of a given problem.
When choosing and using artificial neural networks we need to be familiar with theory of
artificial neural network models and learning algorithms. Complexity of the chosen model is
crucial; using to simple model for specific task usually results in poor or wrong results and
over complex model for a specific task can lead to problems in the process of learning.
Complex model and simple task results in memorizing and not learning. There are many
learning algorithms with numerous tradeoffs between them and almost all are suitable for
any type of artificial neural network model. Choosing the right learning algorithm for a
given task takes a lot of experiences and experimentation on given problem and data set.
When artificial neural network model and learning algorithm is properly selected we get
robust tool for solving given problem.
5.1 Example: Using bidirectional artificial neural network for ICT fraud detection
Spread of Information and Communication Technologies results in not only benefits for
individuals and society but also in threats and increase of Information and Communication
Technology frauds. One of the main tasks for Information and Communication Technology
developers is to prevent potential fraudulent misuse of new products and services. If
protection against fraud fails there is a vital need to detect frauds as soon as possible.
Information and Communication Technology frauds detection is based on numerous
principles. One of such principle is use of artificial neural networks in the detection
algorithms. Below is an example of how to use bidirectional artificial neural network for
detecting mobilephone fraud.
First task is to represent problem of detecting our fraud in the way that can be easily
understand by humans and machines (computers). Each individual user or group of users
behave in specific way while using mobile phone. By learning their behaviour we can teach
our system to recognize and predict users’ future behaviour to a certain degree of accuracy.
Later comparison between predicted and reallife behaviour and potential discrepancy
between them can indicate a potential fraudulent behaviour. It was shown that mobile
phone usage behaviour can be represented in the form of time series suitable for further
analysis with artificial neural networks (Krenker et al., 2009). With this representation we
transform the behaviour prediction task in time series prediction task. Time series prediction
task can be realized with several different types of artificial neural networks but as mentioned
in earlier chapters some are more suitable then others. Because we expect long and short time
periods between important events in our data representation of users’ behaviour the most
obvious artificial neural networks to use are Long Short Term Memory and bidirectional
Artificial Neural Networks  Methodological Advances and Biomedical Applications
16
artificial neural networks. On the basis of others researchers’ favourable results in time series
prediction with bidirectional artificial neural network (Wakuya & Shida, 2001) we decided to
use this artificial neural network topology for predicting our time series.
After we choose artificial neural network architecture we choose the type of learning
paradigm; we choose supervised learning where we gather real life data form
telecommunication system. Gathered data was divided into two subsets; training subset
and validation subset. With training data subset artificial neural network learn to predict
future and past time series and with validation data subset we simulate and validate the
prediction capabilities of designed and finetuned bidirectional artificial neural networks.
Validation was done with calculation of the Average Relative Variance that represents a
measure of similarity between predicted and expected time series.
Only after we gathered information about mobilephone fraud and after choosing
representation of our problem and basic approaches for solving it we could start building
the overall model for detecting mobilephone fraud (Fig. 13.).
On Fig. 13. we can see that mobilephone fraud detection model is build out of three modules;
input module, artificial neural network module and comparison module. Input Module gathers
users’ information about usage of mobilephone from telecommunication system in three
parts. In first part it is used for gathering learning data from which Artificial Neural Network
Module learn itself. In second part Input Module gathers users’ data for purpose of validating
the Artificial Neural Network Module and in the third part it collects users’ data in real time for
purpose of using deployed mobilephone fraud system. Artificial Neural Network Module is bi
directional artificial neural network that is learning from gathered data and later when the
mobilephone fraud detection system is deployed continuously predicts time series that
represents users’ behaviour. Comparison module is used for validation of Artificial Neural
Network Module in the process of learning and later when the mobilephone fraud detection
system is deployed it is used for triggering alarms in case of discrepancies between predicted
and reallife gathered information about users’ behaviour.
Fig. 13. Mobilephone fraud detection model.
Introduction to the Artificial Neural Networks
17
Although mobilephone fraud detection system described above is simple and straight
forward reader needs to realize that majority of work is not in creating and later
implementing desired systems but in finetuning of data representation and artificial
neural network architecture and its parameters that is strongly dependant on type of input
data.
6. Conclusions
Artificial neural networks are widely spread and used in everyday services, products and
applications. Although modern software products enable relatively easy handling with
artificial neural networks, their creation, optimisation and usage in reallife situations it is
necessary to understand theory that stands behind them. This chapter of the book
introduces artificial neural networks to novice reader and serves as a stepping stone for all
of those who would like to get more involved in the area of artificial neural networks.
In the Introduction in order to lighten the area of artificial neural networks we briefly
described basic building blocks (artificial neuron) of artificial neural networks and their
“transformation” from single artificial neuron to complete artificial neural network. In the
chapter Artificial Neuron we present basic and important information about artificial neuron
and where researchers borrowed the idea to create one. We show the similarities between
biological and artificial neuron their composition and inner workings. In the chapter
Artificial Neural Networks we describe basic information about different, most commonly
used artificial neural networks topologies. We described Feedforward, Recurrent, Hopfield,
Elman, Jordan, Long Short Term Memory, Bidirectional, Self Organizing Maps, Stochastic and
Physical artificial neural networks. After describing various types of artificial neural
networks architectures we describe how to make them useful by learning. We describe
different learning paradigms (supervised, unsupervised and reinforcement learning) in
chapter Learning. In the last chapter Usage of Artificial Neural Networks we describe how to
handle artificial neural networks in order to make them capable of solving certain problems.
In order to show what artificial neural networks are capable of, we gave a short example
how to use bidirectional artificial neural network in mobilephone fraud detection system.
7. References
Gurney, K. (1997). An Introduction to Neural Networks, Routledge, ISBN 1857286731
London
Krenker A.; Volk M.; Sedlar U.; Bešter J.; Kos A. (2009). Bidirectional artificial neural
networks for mobilephone fraud detection. ETRI Jurnal., vol. 31, no. 1, Feb. 2009,
pp. 9294, COBISS.SIID 6951764
Kröse B.; Smagt P. (1996). An Introduction to Neural Networks, The University of Amsterdam,
Amsterdam.
Pavešić N. (2000). Razpoznavanje vzorcev: uvod v analizo in razumevanje vidnih in slušnih
signalov, Fakulteta za elektrotehniko, ISBN 9616210815, Ljubljana
Rojas R. (1996). Neural Networks: A Systematic Introduction, Springer, ISBN 3540605053,
Germany.
Artificial Neural Networks  Methodological Advances and Biomedical Applications
18
Wakuya H.; Shida K.. (2001). Bidirectionalization of neural computing architecture for time
series prediction. III. Application to laser intensity time record “Data Set A”.
Proceedings of International Joint Conference on Neural Networks, pp. 2098 – 2103, ISBN
0780370449, Washington DC, 2001, Washington DC.
0
Review of Input Variable Selection Methods for
Artiﬁcial Neural Networks
Robert May
1
,Graeme Dandy
2
and Holger Maier
3
1
Veolia Water,University of Adelaide
2,3
University of Adelaide
Australia
1.Introduction
The choice of input variables is a fundamental,and yet crucial consideration in identifying the
optimal functional formof statistical models.The task of selecting input variables is common
to the development of all statistical models,and is largely dependent on the discovery of
relationships within the available data to identify suitable predictors of the model output.
In the case of parametric,or semiparametric empirical models,the difﬁculty of the input
variable selection task is somewhat alleviated by the a priori assumption of the functional
formof the model,which is based on some physical interpretation of the underlying system
or process being modelled.However,in the case of artiﬁcial neural networks (ANNs),and
other similarly datadriven statistical modelling approaches,there is no such assumption
made regarding the structure of the model.Instead,the input variables are selected from
the available data,and the model is developed subsequently.The difﬁculty of selecting input
variables arises due to (i) the number of available variables,which may be very large;(ii)
correlations between potential input variables,which creates redundancy;and (iii) variables
that have little or no predictive power.
Variable subset selection has been a longstanding issue in ﬁelds of applied statistics dealing
with inference and linear regression (Miller,1984),and the advent of ANN models has only
served to create new challenges in this ﬁeld.The nonlinearity,inherent complexity and
nonparametric nature of ANNregression make it difﬁcult to apply many existing analytical
variable selection methods.The difﬁculty of selecting input variables is further exacerbated
during ANN development,since the task of selecting inputs is often delegated to the ANN
during the learning phase of development.A popular notion is that an ANN is adequately
capable of identifying redundant and noise variables during training,and that the trained
network will use only the salient input variables.ANN architectures can be built with
arbitrary ﬂexibility and can be successfully trained using any combination of input variables
(assuming they are good predictors).Consequently,allowances are often made for a large
number of input variables,with the belief that the ability to incorporate such ﬂexibility and
redundancy creates a more robust model.Such pragmatism is perhaps symptomatic of the
popularisation of ANN models through machine learning,rather than statistical learning
theory.ANN models are too often developed without due consideration given to the
effect that the choice of input variables has on model complexity,learning difﬁculty,and
performance of the subsequently trained ANN.
1
Review of Input Variable Selection Methods
for Artificial Neural Networks
2
Recently,ANN modellers have become increasingly aware of the need to undertake input
variable selection (IVS),and a myriad of methods employed to undertake the IVS task
are described within reported ANN applications—some more suited to ANN development
than others.This review therefore serves to provide some guidance to ANN modellers,by
highlighting some of the key issues surrounding variable selection within the context of ANN
development,and survey some the alternative strategies that can be adopted within a general
framework,and provide some examples with discussion on the beneﬁts and disadvantges in
each case.
2.The input variable selection problem
Recall that for an unknown,steadystate inputoutput process,the development of an ANN
provides the nonlinear transfer function
Y
=
F
(
X
) +
ε,(1)
where the model output Y is some variable of interest,X is a kdimensional input vector,
whose component variables are denoted by X
i
(
i
=
1,...,k
)
,and ε is some small random
noise.Let C denote the set of d variables that are available to construct the ANNmodel.The
I
d
−
k
problemof input variable selection (IVS) is to choose a set of k variables fromC to form
X (Battiti,1994;Kwak &Choi,2002) that leads to the optimal formof the model,F.
Dynamic processes will require the development of an ANN to provide a timeseries model
of the general form
Y
(
t
+
k
) =
F
(
Y
(
t
)
,...,Y
(
t
−
p
)
,X
(
t
)
,...,X
(
t
−
p
)) +
ε
(
t
)
.(2)
Here,the output variable is predicted at some future time t
+
k,as a function of past values
of both input X and output Y.Past observations of each variable are referred to as lags,
and the model order p deﬁnes the maximum lag of the model.The model order reﬂects
the persistence of dynamics within the system.In comparison to the steadystate model
formulation,the number of variables in the candidate set C is now multiplied by the model
order.Consequently,for systems with strong persistence,the number of candidate variables
is often quite large.
ANN models may be speciﬁed with insufﬁcient,or uninformative input variables
(underspeciﬁed);or more inputs than is strictly necessary (overspeciﬁed),due to the
inclusion of superﬂuous variables that are uninformative,weakly informative,or redundant.
Deﬁning what constitutes an optimal set of ANN input variables ﬁrst requires some
consideration of the impact that the choice of input variables has on model performance.The
following arguments summarise the key considerations:
• Relevance.Arguably the most obvious concern is that too few variables are selected,or
that the selected set of input variables is not sufﬁciently informative.In this case,the
outcome is a poorly performing model,since some of the behaviour of the output remains
unexplained by the selected input variables.In most cases,it is reasonable to assume that
a modeller will have some expert knowledge of the systemunder consideration;will have
surveyed the available data,and will have arrived at a reasonable set of candidate input
variables.The a priori assumption of model development is that at least one or more of
the available candidate variables is capable of describing some,if not all,of the output
behaviour,and that it is the nature and relative strength of these relationships that is
unknown (which is,of course,the motivation behind the development of nonparametric
20
Artificial Neural Networks  Methodological Advances and Biomedical Applications
Recently,ANN modellers have become increasingly aware of the need to undertake input
variable selection (IVS),and a myriad of methods employed to undertake the IVS task
are described within reported ANN applications—some more suited to ANN development
than others.This review therefore serves to provide some guidance to ANN modellers,by
highlighting some of the key issues surrounding variable selection within the context of ANN
development,and survey some the alternative strategies that can be adopted within a general
framework,and provide some examples with discussion on the beneﬁts and disadvantges in
each case.
2.The input variable selection problem
Recall that for an unknown,steadystate inputoutput process,the development of an ANN
provides the nonlinear transfer function
Y
=
F
(
X
) +
ε,(1)
where the model output Y is some variable of interest,X is a kdimensional input vector,
whose component variables are denoted by X
i
(
i
=
1,...,k
)
,and ε is some small random
noise.Let C denote the set of d variables that are available to construct the ANNmodel.The
I
d
−
k
problemof input variable selection (IVS) is to choose a set of k variables fromC to form
X (Battiti,1994;Kwak &Choi,2002) that leads to the optimal formof the model,F.
Dynamic processes will require the development of an ANN to provide a timeseries model
of the general form
Y
(
t
+
k
) =
F
(
Y
(
t
)
,...,Y
(
t
−
p
)
,X
(
t
)
,...,X
(
t
−
p
)) +
ε
(
t
)
.(2)
Here,the output variable is predicted at some future time t
+
k,as a function of past values
of both input X and output Y.Past observations of each variable are referred to as lags,
and the model order p deﬁnes the maximum lag of the model.The model order reﬂects
the persistence of dynamics within the system.In comparison to the steadystate model
formulation,the number of variables in the candidate set C is now multiplied by the model
order.Consequently,for systems with strong persistence,the number of candidate variables
is often quite large.
ANN models may be speciﬁed with insufﬁcient,or uninformative input variables
(underspeciﬁed);or more inputs than is strictly necessary (overspeciﬁed),due to the
inclusion of superﬂuous variables that are uninformative,weakly informative,or redundant.
Deﬁning what constitutes an optimal set of ANN input variables ﬁrst requires some
consideration of the impact that the choice of input variables has on model performance.The
following arguments summarise the key considerations:
• Relevance.Arguably the most obvious concern is that too few variables are selected,or
that the selected set of input variables is not sufﬁciently informative.In this case,the
outcome is a poorly performing model,since some of the behaviour of the output remains
unexplained by the selected input variables.In most cases,it is reasonable to assume that
a modeller will have some expert knowledge of the systemunder consideration;will have
surveyed the available data,and will have arrived at a reasonable set of candidate input
variables.The a priori assumption of model development is that at least one or more of
the available candidate variables is capable of describing some,if not all,of the output
behaviour,and that it is the nature and relative strength of these relationships that is
unknown (which is,of course,the motivation behind the development of nonparametric
models).Should it happen that none of the available candidates are good predictors,then
the problem of model development is intractable,and it may be necessary to reconsider
the available data and the choice of model output,and to undertake further measurements
or observations before revisiting the task of model development.
• Computational Effort.The immediately obvious effect of including a greater number of
input variables is that the size of an ANN increases,which increases the computational
burden associated with querying the network—a signiﬁcant inﬂuence in determining the
speed of training.In the case of the multilayer perceptron (MLP),the input layer will
have an increased number of incoming connection weights.In the case of kernelbased
generalised regression neural network (GRNN) and radial basis function (RBF) networks,
the computation of distance to prototype vectors is more expensive due to higher
dimensionality.Furthermore,additional variables place an increased burden on any data
preprocessing steps that may be undertaken during ANNdevelopment.
• Training difﬁculty.The task of training an ANN becomes more difﬁcult due to the
inclusion of redundant and irrelevant input variables.The effect of redundant variables
is to increase the number of local optima in the error function that is projected over the
parameter space of the model,since there are more combinations of parameters that can
yield locally optimal error values.Algorithms such as the backpropagation algorithm,
which are based on gradient descent,are therefore more likely to converge to a local
optimum resulting in poor generalisation performance.Training of the network is also
slower because the relationship between redundant parameters and the error is more
difﬁcult to map.Irrelevant variables add noise into the model,which also hinders the
learning process.The training algorithm may expend resources adjusting weights that
have no bearing on the output variable,or the noise may mask the important inputoutput
relationships.Consequently,many more iterations of the training algorithm may be
required to determine a nearglobal optimum error,which adds to the computational
burden of model development.
• Dimensionality.The socalled curse of dimensionality (Bellman,1961) is that,as the
dimensionality of a model increases linearly,the total volume of the modelling problem
domain increases exponentially.Hence,in order to map a given function over the
model parameter space with sufﬁcient conﬁdence,an exponentially increasing number of
samples is required (Scott,1992).Alternatively,where a ﬁnite number of data are available
(as is generally the case in realworld applications),it can be said that the conﬁdence or
certainty that the true mapping has been found will diminish.ANN architectures like
the MLP are particularly susceptible to the curse due to the rapid growth in the number
of connection weights as input variables are added.Table 1 illustrates the growth in the
sample size required to maintain a constant error associated with estimates of the input
probability,as determined by the pattern layer of a GRNN.Some ANN architectures
can also circumvent the curse of dimensionality through their handling of redundancy
and their ability to simply ignore irrelevant variables (Sarle,1997).Others,such as
RBF networks and GRNN architectures,are unable to achieve this without signiﬁcant
modiﬁcations to the behaviour of their kernel functions,and are particularly sensitive to
increasing dimensionality (Specht,1991).
• Comprehensibility.In many applications,such as in the case of ANN transfer functions
for process modelling,it will often sufﬁce to regard an ANN as a “blackbox"’ model.
However,ANN modellers are increasingly concerned with the development of ANN
21
Review of Input Variable Selection Methods for Artificial Neural Networks
Dimension,d Sample size,N
1 4
2 19
3 67
4 223
5 768
6 2790
7 10 700
8 43 700
9 180 700
10 842 000
Table 1.Growth of sample size with increasing dimensionality required to maintain a
constant standard error of the probability of an input estimated in the GRNNpattern layer
(Silverman,1986).
models for knowledge discovery from data (KDD) and data mining (Craven & Shavlik,
1998).The goal of KDD is to train an ANN based on observations of a process,and then
interrogate the ANNto gain further understanding of the process behaviour it has learned.
Ruleextraction from ANN models can be useful for a number of purposes,including:
(i) deﬁning input domains that produce certain ANN outputs,which can be useful
knowledge in itself;(ii) validation of the ANNbehaviour (e.g.verifying that inputoutput
response trends make sense),which increases conﬁdence in the ANN predictions;and
(iii) the discovery of new relationships,which reveals previously unknown insights into
the underlying physical process (Craven & Shavlik,1998;Darbari,2000).Reducing the
complexity of the ANN architecture,by minimising redundancy and the size of the
network,can signiﬁcantly improve the performance of data mining and rule extraction
algorithms.
Based on the arguments presented,a desirable input variable is a highly informative
explanatory variable (i.e a good predictor) that is dissimilar to other input variables (i.e.
independent).Consequently,the optimal input variable set will contain the fewest input
variables required to describe the behaviour of the output variable,with a minimum degree
of redundancy and with no uninformative (noise) variables.Identiﬁcation of an optimal
set of input variables will lead to a more accurate,efﬁcient,costeffective and more easily
interpretible ANNmodel.
The fundamental importance of the IVS issue is evident from the depth of literature
surrounding the development and discussion of IVS algorithms in ﬁelds such as classiﬁcation,
machine learning,statistical learning theory,and many other ﬁelds where ANN models are
applied.In a broad context,reviews of IVS approaches have been presented by Kohavi &
John (1997),Blum&Langley (1997) and more recently,by Guyon &Elisseeff (2003).However,
in many examples of the application of ANNs to modelling and data analysis applications,
the importance of IVS is often understated.In other cases,the task is given only marginal
consideration and this often results in the application of ad hoc or inappropriate methods.
Reviews by Maier & Dandy (2000) and Bowden (2003) examined the IVS methods that have
been applied to ANN applications in engineering and concluded that there was a need for a
more consideredapproachto the IVS task.Certainly,no consensus has beenreachedregarding
22
Artificial Neural Networks  Methodological Advances and Biomedical Applications
Dimension,d Sample size,N
1 4
2 19
3 67
4 223
5 768
6 2790
7 10 700
8 43 700
9 180 700
10 842 000
Table 1.Growth of sample size with increasing dimensionality required to maintain a
constant standard error of the probability of an input estimated in the GRNNpattern layer
(Silverman,1986).
models for knowledge discovery from data (KDD) and data mining (Craven & Shavlik,
1998).The goal of KDD is to train an ANN based on observations of a process,and then
interrogate the ANNto gain further understanding of the process behaviour it has learned.
Ruleextraction from ANN models can be useful for a number of purposes,including:
(i) deﬁning input domains that produce certain ANN outputs,which can be useful
knowledge in itself;(ii) validation of the ANNbehaviour (e.g.verifying that inputoutput
response trends make sense),which increases conﬁdence in the ANN predictions;and
(iii) the discovery of new relationships,which reveals previously unknown insights into
the underlying physical process (Craven & Shavlik,1998;Darbari,2000).Reducing the
complexity of the ANN architecture,by minimising redundancy and the size of the
network,can signiﬁcantly improve the performance of data mining and rule extraction
algorithms.
Based on the arguments presented,a desirable input variable is a highly informative
explanatory variable (i.e a good predictor) that is dissimilar to other input variables (i.e.
independent).Consequently,the optimal input variable set will contain the fewest input
variables required to describe the behaviour of the output variable,with a minimum degree
of redundancy and with no uninformative (noise) variables.Identiﬁcation of an optimal
set of input variables will lead to a more accurate,efﬁcient,costeffective and more easily
interpretible ANNmodel.
The fundamental importance of the IVS issue is evident from the depth of literature
surrounding the development and discussion of IVS algorithms in ﬁelds such as classiﬁcation,
machine learning,statistical learning theory,and many other ﬁelds where ANN models are
applied.In a broad context,reviews of IVS approaches have been presented by Kohavi &
John (1997),Blum&Langley (1997) and more recently,by Guyon &Elisseeff (2003).However,
in many examples of the application of ANNs to modelling and data analysis applications,
the importance of IVS is often understated.In other cases,the task is given only marginal
consideration and this often results in the application of ad hoc or inappropriate methods.
Reviews by Maier & Dandy (2000) and Bowden (2003) examined the IVS methods that have
been applied to ANN applications in engineering and concluded that there was a need for a
more consideredapproachto the IVS task.Certainly,no consensus has beenreachedregarding
suitable methods for undertaking the IVS task in the development of ANN regression or
timeseries forecasting models (Bowden,2003).
3.Taxonomy of algorithms
Figure 1 presents a taxonomy,which provides some examples of the various approaches that
have beenproposedwithinANNliterature.IVS algorithms canbe broadly classiﬁedinto three
main classes:wrapper,embedded or ﬁlter algorithms (Blum&Langley,1997;Guyon &Elisseeff,
2003;Kohavi & John,1997),as shown in Figure 1.These different conceptual approaches to
IVS algorithmdesign are illustrated in Figure 2.Wrapper algorithms,as shown in Figure 2(a),
approach the IVS task as part of the optimisation of model architecture.The optimisation
searches through the set,or a subset,of all possible combinations of input variables,and
selects the set that yields the optimal generalisation performance of the trained ANN.As
the name indicates,embedded algorithms (Figure 2(b)) for IVS are directly incorporated into
the ANNtraining algorithm,such that the adjustment of input weights considers the impact
of each input on the performance of the model,with irrelevant and/or redundant weights
progressively removed as training proceeds.In contrast,IVS ﬁlters (Figure 2(c)) distinctly
separate the IVS task from ANN training and instead adopt an auxiliary statistical analysis
technique to measure the relevance of individual,or combinations of,input variables.
Given the general basis for the formulation of both IVS wrapper and ﬁlter designs,the
diversity of implementations that can possibly be conceived is immediately apparent.
However,designs for wrappers and ﬁlters share the same overall components,in that,in
addition to a measure of the informativeness of input variables,each class of selection
algorithms requires:
1.a criterion or test to determine the inﬂuence of the selected input variable(s),and
2.a strategy for searching among the combinations of candidate input variables.
3.1 Optimality Criteria
The optimality criterion deﬁnes the interpretation of the arguments presented in Section 2
into an expression for the optimal size k and composition of the input vector,X.Optimality
criteria for wrapper selection algorithms are derived from,or are exactly the same as,criteria
that are ultimately used to assess the predictive performance of the trained ANN.Essentially,
the wrapper approach treats the IVS task as a model selection exercise,where each model
corresponds to a unique combination of input variables.Recall that the most commonly
adoptedmeasure of predictive performance for ANNs is the mean squarederror (MSE),which
is given by
MSE
=
1
n
n
∑
j
=
1
y
j
−
ˆ
y
j
2
(3)
where y
j
and ˆy
j
are the actual and predicted outputs,which correspond to a set of test
data.Following the development of m models,a simple strategy is to select the model
that corresponds to the minimum MSE.However,the drawback of this criterion is that the
“best” performing model,in terms of the MSE,is not necessarily the “optimal” model,since
models with a large number of input variables tend to be biased as a result of overﬁtting.
Consequently,it is more common to adopt an optimality criterion such as Mallows’ C
p
(Mallows,1973),or the Akaike information criterion (AIC) (Akaike,1974),which penalise
overﬁtting.Both Mallows’ C
p
and the AIC determine the optimal number of input variables
23
Review of Input Variable Selection Methods for Artificial Neural Networks
Dimension Reduction
Rotation
Linear
Principal component analysis (PCA)
Partial LeastSquares (PLS) (Wold,1966)
NonLinear
Independent component analysis (ICA)
Nonlinear PCA(NLPCA)
Clustering
Learning vector quantisation (LVQ)
Selforganizing map (SOM) (Bowden et al.,2002)
Variable selection
Modelbased
Wrapper
Nested
Forward selection (constructive ANNs)
Backward elimination
Nested subset (e.g.increasing delay order)
Global search
Exhaustive search
Heuristic search (e.g.GAANN)
Ranking
Singlevariable Ranking (SVR)
GRNNInput Determination Algorithm(GRIDA)
Embedded
Optimisation
Direct Optimisation (e.g.Lasso)
Evolutionary ANNs
Weightbased
Stepwise regression
Pruning (e.g.OBD(Le Cun et al.,1990))
Recursive feature elimination
Filter (modelfree)
Correlation (linear)
Rank (maximum) Pearson correlation
Ranked (maximum) Spearman correlation
Forward partial correlation selection
Timeseries analysis (Box &Jenkins,1976)
Information theoretic (nonlinear)
Entropy
Entropy (minimum) ranking
Minimumentropy
Mutual Information (MI)
Rank (maximum) MI
MI feature selection (MIFS) (Battiti,1994)
MI w/ICA(ICAIVS) (Back &Trappenberg,2001)
Partial mutual information (PMI) (Sharma,2000)
Joint MI (JMI) (Bonnlander &Weigend,1994)
Fig.1.Taxonomy of IVS Strategies and Algorithms
24
Artificial Neural Networks  Methodological Advances and Biomedical Applications
Dimension Reduction
Rotation
Linear
Principal component analysis (PCA)
Partial LeastSquares (PLS) (Wold,1966)
NonLinear
Independent component analysis (ICA)
Nonlinear PCA(NLPCA)
Clustering
Learning vector quantisation (LVQ)
Selforganizing map (SOM) (Bowden et al.,2002)
Variable selection
Modelbased
Wrapper
Nested
Forward selection (constructive ANNs)
Backward elimination
Nested subset (e.g.increasing delay order)
Global search
Exhaustive search
Heuristic search (e.g.GAANN)
Ranking
Singlevariable Ranking (SVR)
GRNNInput Determination Algorithm(GRIDA)
Embedded
Optimisation
Direct Optimisation (e.g.Lasso)
Evolutionary ANNs
Weightbased
Stepwise regression
Pruning (e.g.OBD(Le Cun et al.,1990))
Recursive feature elimination
Filter (modelfree)
Correlation (linear)
Rank (maximum) Pearson correlation
Ranked (maximum) Spearman correlation
Forward partial correlation selection
Timeseries analysis (Box &Jenkins,1976)
Information theoretic (nonlinear)
Entropy
Entropy (minimum) ranking
Minimumentropy
Mutual Information (MI)
Rank (maximum) MI
MI feature selection (MIFS) (Battiti,1994)
MI w/ICA(ICAIVS) (Back &Trappenberg,2001)
Partial mutual information (PMI) (Sharma,2000)
Joint MI (JMI) (Bonnlander &Weigend,1994)
Fig.1.Taxonomy of IVS Strategies and Algorithms
Training
Model
Selection
Candidates
Search
Algorithm
Variable(s)
Optimality Test
Selected ANN (inputs)
Error
(a) Wrapper
Training
Query
Weight
Update
Candidates
Optimality Test
Trained ANN (inputs)
Error
(b) Embedded
Statistical
Evaluation
Training
Candidates
Search
Algorithm
Optimality Test
Trained ANN
Variable(s)
Selected
input(s)
(c) Filter
Fig.2.Conceptual IVS approach using a (a) wrapper,(c) embedded,or (b) ﬁlter algorithm.
by deﬁning the optimal tradeoff between model size and accuracy by penalising models with
an increasing number of parameters.In fact,the C
p
criterion is considered to be a special case
of the AIC.
Mallows’ C
p
is is deﬁned as
C
p
=
∑
n
j
=
1
y
j
−
ˆy
j
(
k
)
2
σ
2
d
−
n
+
2p,(4)
where y
j
(
k
)
are the outputs generated by a model using p parameters,and σ
2
d
are residuals
for a full model trained using all d possible input variables.C
p
measures the relative bias and
variance of a model with p variables.The theoretical value of C
p
for an unbiased (optimal)
model will be p,and in model selection,the model with the C
p
value that is closest to p is
selected.
25
Review of Input Variable Selection Methods for Artificial Neural Networks
2p+1
log(MSE(p))
Optimal number of
parameters
AIC(p)
AIC(p)
p
Fig.3.The Akaike Information Criterion determines the optimumtradeoff between model
error and size
The AIC is deﬁned as
AIC
= −
nlog
∑
n
j
=
1
y
j
−
ˆy
j
(
k
)
2
n
+
2
(
p
+
1
)
.(5)
Here,the accuracy is determined by the loglikelihood,which is a function of the MSE.The
complexity of the model is determined by the term p
+
1,where p is the number of model
parameters.Typically,the regression error decreases with increasing p,but since the model
is more likely to be overﬁt for a ﬁxed sample size,the increasing complexity is penalised.
At some point an optimal AIC is determined,which represents the optimal tradeoff between
model accuracy and model complexity.The optimummodel is determined by minimising the
AIC with respect to the number of model parameters,p.This is illustrated in Figure 3.
Other model selection criteria have also been similarly derived,such as the Bayesian
information criterion (BIC) (Schwarz,1978),which is similar to the AIC,although it applies
a more severe penalty of
(
k lnn
)
to the number of model parameters.The expression for the
AIC in (5) assumes a linear regression model,but can be extended to nonlinear regression.
However,it should be noted that in this case,p
+
1 no longer sufﬁciently describes the
complexity of the model and other measures are required.Such measures include the effective
number of parameters,or VapnikChernovenkis dimension.The values of these measures are a
function of the class of regression model that is estimated and the training data.The effective
number of parameters,d can be determined by trace
(
S
)
,where S is a matrix deﬁned by the
expression
ˆ
y
=
Sy.(6)
For kernel regression,the hat matrix,S,is equal to K
T
K,where the elements of K correspond
to each K
j
(
x,h
)
,and the complexity is therefore given by trace(K
T
K).Factors affecting
26
Artificial Neural Networks  Methodological Advances and Biomedical Applications
2p+1
log(MSE(p))
Optimal number of
parameters
AIC(p)
AIC(p)
p
Fig.3.The Akaike Information Criterion determines the optimumtradeoff between model
error and size
The AIC is deﬁned as
AIC
= −
nlog
∑
n
j
=
1
y
j
−
ˆy
j
(
k
)
2
n
+
2
(
p
+
1
)
.(5)
Here,the accuracy is determined by the loglikelihood,which is a function of the MSE.The
complexity of the model is determined by the term p
+
1,where p is the number of model
parameters.Typically,the regression error decreases with increasing p,but since the model
is more likely to be overﬁt for a ﬁxed sample size,the increasing complexity is penalised.
At some point an optimal AIC is determined,which represents the optimal tradeoff between
model accuracy and model complexity.The optimummodel is determined by minimising the
AIC with respect to the number of model parameters,p.This is illustrated in Figure 3.
Other model selection criteria have also been similarly derived,such as the Bayesian
information criterion (BIC) (Schwarz,1978),which is similar to the AIC,although it applies
a more severe penalty of
(
k lnn
)
to the number of model parameters.The expression for the
AIC in (5) assumes a linear regression model,but can be extended to nonlinear regression.
However,it should be noted that in this case,p
+
1 no longer sufﬁciently describes the
complexity of the model and other measures are required.Such measures include the effective
number of parameters,or VapnikChernovenkis dimension.The values of these measures are a
function of the class of regression model that is estimated and the training data.The effective
number of parameters,d can be determined by trace
(
S
)
,where S is a matrix deﬁned by the
expression
ˆ
y
=
Sy.(6)
For kernel regression,the hat matrix,S,is equal to K
T
K,where the elements of K correspond
to each K
j
(
x,h
)
,and the complexity is therefore given by trace(K
T
K).Factors affecting
complexity include the number of data,the dimension of the data,and the number of basis
functions.The VCdimension is similarly deﬁned as the number of data points that can be
shattered by the model (i.e.how many points in space can be uniquely separated by the
regression function).However,calculating the VCdimension of complex regression functions
can be difﬁcult (Hastie et al.,2001).For MLP architectures,the VCdimension is related to
the number of connection weights,and for RBF networks the VCdimension depends on the
number of basis functions and their respective bandwidths,if different value are used for each
basis function.Both the effective number of parameters and the VCdimension revert to the
value of p
+
1 for linear models.
In ﬁlter algorithm designs,the optimality criterion is embedded in the statistical analysis of
candidate variables,which deﬁnes the interpretation of “good” input variables.In general,
selection ﬁlters search amongst the candidate variables and identify suitable input variables
according to the following criteria:
1.maximumrelevance (MR),
2.minimumredundancy (mR),and
3.minimumredundancy–maximumRelevance (mRMR).
The criterion of maximum relevance ensures that the selected input variables are highly
informative by searching for variables that have a high degree of correlation with the output
variable.Input ranking schemes are a prime example of MR techniques,in which the
relevance is determined for each input variable with the output variable.Greedy selection
can be applied to select the k most relevant variables,or a threshold value can be applied to
select inputs that are relevant,and reject those which are not.
The issue with MR criteria is that the selection of the k most relevant candidate variables does
not strictly yield an optimal ANN.Here,Kohavi & John (1997) make the distinction between
relevance and usefulness by observing that redundancy between variables can render highly
relevant variables useless as predictors.Consequently,a criterion of minimum redundancy
aims to ﬁnd inputs that are maximally dissimilar fromone another,in order to select the most
useful set of relevant variables.The application of an additional mRcriterion with the existing
MR criterion leads to mRMR selection criteria,where input variables are evaluated with
the dual consideration of relevance,with respect to the output variable;and independence
(dissimilarity),with respect to the other candidate variables (Ding &Peng,2005).
Embedded IVS considers regularisation (reducing the size or number) of the weights of
a regression to minimise the complexity,while maintaining predictive performance.This
involves the formulation of a training algorithm that simultaneously ﬁnds the minimum
model error and model complexity,somewhat analogous to ﬁnding the optimum the AIC.
If the model architecture is linearintheparameters,the resulting expression can be solved
directly.Depending on the model complexity term,this approach gives rise to various
embedded selection algorithms,such as the Lasso (Tibrishani,1996).However,the nonlinear
and nonparametric nature of ANNregression does not lend itself to this approach (Guyon &
Elisseeff,2003;Tikka,2008).Instead,embedded selection is typically applied in ANN model
development in the form of a pruning strategy,where the connection weights of a network
are assessed,and insigniﬁcant weights are removed from the network.Pruning algorithms
were originally developed to address the computational burden associated with training fully
connected networks,given that many of the weights may be only marginally important due
to redundancy within the ANN architecture.However,the strategy also offers the means of
selectively removing inputs,since aninput variable is eliminatedby eliminating all connection
27
Review of Input Variable Selection Methods for Artificial Neural Networks
weights between an input and the ﬁrst hidden layer (Tikka,2008).A criterion is required to
identify which connection weights should be pruned,and several different approaches can be
used to determine howweights are removed (Guyon &Elisseeff,2003):
1.Analysis of sensitivity of training error to elimination of weights,or
2.Elimination of variables based on weight magnitude.
Where the ﬁrst approach has been used,different expressions for the sensitivity of the error to
the weights have led to various different algorithms.The use of derivatives of error functions
or transfer functions at hidden nodes with respect to the weights are common strategies,and
lead to examples of pruning algorithms such as the optimal brain damage (OBD) algorithm
(Le Cun et al.,1990).
3.2 Search strategies
Search strategies applied to IVS algorithms seek to provide an efﬁcient method for searching
through the many possible combinations of input variables and determining an optimal,or
near optimal set,while working within computational constraints.Searches may be global,
and consider many combinations;or local methods,which begin at a start location and move
through the search space incrementally.The latter are also commonly referred to as nested
subset techniques,since the region they explore comprises overlapping (i.e.nested) sets by
incrementally adding variables.
3.2.1 Exhaustive search
Exhaustive search simply evaluates all of the possible combinations of input variables and
selects the best set according to a predetermined optimality criteria.The method is the
only selection technique that is guaranteed to determine the optimal set of input variables
for a given ANN model (Bonnlander & Weigend,1994).Given the combinatorial nature
of the IVS problem,the number of possible subsets that form the search space is equal
to 2
d
,with subsets ranging in size from single input variables,to the set of all available
input variables.Exhaustive evaluation of all of these possible combinations may be feasible
when the dimensionality of the candidate set is low,but quickly becomes infeasible as
dimensionality increases.
3.2.2 Forward selection
Forward selection is a linear incremental search strategy that selects individual candidate
variables one at a time.In the case of wrappers,the method starts by training d singlevariable
ANN models and selecting the input variable that maximises the model performancebased
optimality criterion.Selection then continues by iteratively training d
−
1 bivariate ANN
models,in each case adding a remaining candidate to the previously selected input variable.
Selection is terminated when the addition of another input variable fails to improve the
performance of the ANNmodel.In ﬁlter designs,the single most relevant candidate variable
is selected ﬁrst,and then forward selection proceeds by iteratively identifying the next
most relevant candidate and evaluating whether the variable should be selected,until the
optimality criterion is satisﬁed.
The approach is computationally efﬁcient overall,and tends to result in the selection of
relatively small input variable sets,since it considers the smallest possible models,and trials
increasingly larger input variable sets until the optimal set is reached.However,because
forward selection does not consider all of the possible combinations,and only searches a
28
Artificial Neural Networks  Methodological Advances and Biomedical Applications
weights between an input and the ﬁrst hidden layer (Tikka,2008).A criterion is required to
identify which connection weights should be pruned,and several different approaches can be
used to determine howweights are removed (Guyon &Elisseeff,2003):
1.Analysis of sensitivity of training error to elimination of weights,or
2.Elimination of variables based on weight magnitude.
Where the ﬁrst approach has been used,different expressions for the sensitivity of the error to
the weights have led to various different algorithms.The use of derivatives of error functions
or transfer functions at hidden nodes with respect to the weights are common strategies,and
lead to examples of pruning algorithms such as the optimal brain damage (OBD) algorithm
(Le Cun et al.,1990).
3.2 Search strategies
Search strategies applied to IVS algorithms seek to provide an efﬁcient method for searching
through the many possible combinations of input variables and determining an optimal,or
near optimal set,while working within computational constraints.Searches may be global,
and consider many combinations;or local methods,which begin at a start location and move
through the search space incrementally.The latter are also commonly referred to as nested
subset techniques,since the region they explore comprises overlapping (i.e.nested) sets by
incrementally adding variables.
3.2.1 Exhaustive search
Exhaustive search simply evaluates all of the possible combinations of input variables and
selects the best set according to a predetermined optimality criteria.The method is the
only selection technique that is guaranteed to determine the optimal set of input variables
for a given ANN model (Bonnlander & Weigend,1994).Given the combinatorial nature
of the IVS problem,the number of possible subsets that form the search space is equal
to 2
d
,with subsets ranging in size from single input variables,to the set of all available
input variables.Exhaustive evaluation of all of these possible combinations may be feasible
when the dimensionality of the candidate set is low,but quickly becomes infeasible as
dimensionality increases.
3.2.2 Forward selection
Forward selection is a linear incremental search strategy that selects individual candidate
variables one at a time.In the case of wrappers,the method starts by training d singlevariable
ANN models and selecting the input variable that maximises the model performancebased
optimality criterion.Selection then continues by iteratively training d
−
1 bivariate ANN
models,in each case adding a remaining candidate to the previously selected input variable.
Selection is terminated when the addition of another input variable fails to improve the
performance of the ANNmodel.In ﬁlter designs,the single most relevant candidate variable
is selected ﬁrst,and then forward selection proceeds by iteratively identifying the next
most relevant candidate and evaluating whether the variable should be selected,until the
Enter the password to open this PDF file:
File name:

File size:

Title:

Author:

Subject:

Keywords:

Creation Date:

Modification Date:

Creator:

PDF Producer:

PDF Version:

Page Count:

Preparing document for printing…
0%
Σχόλια 0
Συνδεθείτε για να κοινοποιήσετε σχόλιο