536

ostentationabioticInternet και Εφαρμογές Web

5 Ιουλ 2012 (πριν από 5 χρόνια και 1 μήνα)

690 εμφανίσεις

SWITCHES
9-
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
ORDERING DATA:
SERIES 5360 PROXIMITY SWITCHES
CORD TYPE
0 - Cabled
2 - Quick Connect
TO ORDER SPECIFY:
SENSING
CIRCUITRY DESCRIPTION SWITCH COLOR
2-2 NPN or PNP DC Reed White
3-1 NPN DC Hall Yellow
4-1 PNP DC Hall Red
5-1 NPN DC Solid State Black
6-1 PNP DC Solid State Orange
9-2 AC Reed w/Current Limiting Green
Type, Cord Type, Sensing Circuitry,
Design No., and Cable Length.
2-2
536
0
CABLE LENGTH
02 - 2 meter length cable
(Leave blank when quick
connect is specified)
TYPE
Hall, Reed, Magnetoresistive
02
-
NOTES:
1) Cordsets for quick connect switches
must be ordered separately.
2) Other cable lengths available. Consult PHD.
PART NO.
63549-02
63549-05
LENGTH
2 meter
5 meter
CORDSETS
WITH QUICK CONNECT
9-
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
SWITCHES
BENEFITS:
SERIES 5360 HALL EFFECT SWITCHES
BENEFITS
■ Series 5360 Hall Effect Switches are available for use on selected
PHD products, making it easy to interface these actuators with
various electronic controls.
■ Switches have no moving parts or mechanical contacts,
providing long switch life and elimination of contact bounce.
■ Constant amplitude output is provided for use with most digital
logic systems.
■ Low profile integral clamp mounting is easy to adjust over the
entire piston travel of the cylinder or actuator.
■ Several switches may be mounted to control or initiate any
sequence or function.
■ Dual LED indicators provide convenient means for positioning
and troubleshooting circuits. Green LED shows that power is
being received at the switch and amber shows when the switch
output is on.
■ Available in a Quick Connect model for easy installation
and maintenance.
Series 5360 Hall Effect Switches are designed specifically to
provide an input signal to various types of programmable controllers
or logic systems. Since Hall Effect Switches are solid-state, there are
no moving parts to wear out. They offer an infinite number of trouble-
free operations. Hall Effect Switches operate on DC current only.
SPECIFICATIONS 53603 & 53623 53604 & 53624
OPERATING PRINCIPLE Hall Effect
ACTUATED BY Moving Magnet
INPUT VOLTAGE 4.5 to 24 VDC
OUTPUT TYPE NPN (Sink) PNP (Source)
CURRENT RATING 20 mA. Max.100 mA. Max.
VOLTAGE DROP.5 VDC Max.
SWITCH BURDEN 12 mA. Max.
ENVIRONMENTAL IP67
OPERATING TEMP.0° to 80°C
MODEL NO. 53604 & 53624 - PNP (SOURCE)
INPUT - 4.5-24 VDC
LOAD CURRENT - 100 mA. MAX.
SWITCH HOUSING COLOR - RED
(LED’s have been omitted from the schematic for clarity.)
MODEL NO. 53603 & 53623 - NPN (SINK)
INPUT - 4.5-24 VDC
LOAD CURRENT - 20 mA. MAX.
SWITCH HOUSING COLOR - YELLOW
(LED’s have been omitted from the schematic for clarity.)
BLACK
BROWN
BLUE
LOAD
SWITCH
DC
DC
CABLED MODEL 53603
1
2/4
3
PIN 2/4
PIN 1
PIN 3
LOAD
SWITCH
DC
DC
QUICK CONNECT MODEL 53623
1
2/4
3
PIN 2/4
PIN 1
PIN 3
LOAD
SWITCH
DC
DC
QUICK CONNECT MODEL 53624
LOAD
SWITCH
DC
DC
CABLED MODEL 53604
HALL EFFECT WIRING SCHEMATICS
BROWN
BLUE
BLACK
BROWN
BLUE
BLACK
BLACK
BROWN
BLUE
SWITCHES
9-
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
BENEFITS:
SERIES 5360 SOLID STATE SWITCHES
BENEFITS
■ Series 5360 Solid State Switches are available for use on
selected PHD products, making it easy to interface these
actuators with various electronic controls.
■ Switches are solid state, having no moving parts or mechanical
contacts, providing long switch life and elimination of
contact bounce.
■ Transient voltage protection.
■ Constant amplitude output is provided for use with most digital
logic systems.
■ Reverse polarity protection.
■ Low profile integral clamp mounting is easy to adjust over the
entire piston travel of the cylinder or actuator.
■ Several switches may be mounted to control or initiate any
sequence or function.
■ Dual LED indicators provide convenient means for positioning
and troubleshooting circuits. Green LED shows that power is
being received at the switch and amber shows when the switch
output is on.
■ Available in a Quick Connect model for easy installation
and maintenance.
Series 5360 Solid State Switches are designed specifically
to provide an input signal to various types of programmable
controllers or logic systems. Since Solid State Switches have no
moving parts to wear out, they offer an infinite number of trouble-
free operations. Solid State Switches operate on DC current only.
MODEL NO. 53606 & 53626 - PNP (SOURCE)
INPUT - 6-24 VDC
LOAD CURRENT - 100 mA. MAX.
SWITCH HOUSING COLOR - ORANGE
(LED’s have been omitted from the schematic for clarity.)
MODEL NO. 53605 & 53625 - NPN (SINK)
INPUT - 6-24 VDC
LOAD CURRENT - 20 mA. MAX.
SWITCH HOUSING COLOR - BLACK
(LED’s have been omitted from the schematic for clarity.)
BLACK
BROWN
BLUE
LOAD
SWITCH
DC
DC
CABLED MODEL 53605
1
2/4
3
PIN 2/4
PIN 1
PIN 3
LOAD
SWITCH
DC
DC
QUICK CONNECT MODEL 53625
1
2/4
3
PIN 2/4
PIN 1
PIN 3
LOAD
SWITCH
DC
DC
QUICK CONNECT MODEL 53626
LOAD
SWITCH
DC
DC
CABLED MODEL 53606
SOLID STATE WIRING SCHEMATICS
BROWN
BLUE
BLACK
BROWN
BLUE
BLACK
BLACK
BROWN
BLUE
SPECIFICATIONS 53605 & 53625 53606 & 53626
OPERATING PRINCIPLE Solid State
ACTUATED BY Moving Magnet
INPUT VOLTAGE 6 to 24 VDC Max.
OUTPUT TYPE NPN (Sink) PNP (Source)
CURRENT RATING 20 mA. Max.100 mA. Max.
VOLTAGE DROP.5 VDC Max.
SWITCH BURDEN 12 mA. Max.
ENVIRONMENTAL IP67*
OPERATING TEMP.0° to 80°C
9-9
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
SWITCHES
DIMENSIONS:
SERIES 5360 HALL/SOLID STATE SWITCHES
HALL EFFECT AND SOLID STATE SWITCH
.700 [17.8]
.325
[8.2]
.580
[14.7]
.061
[1.5]
.460
[11.7]
.150
[3.8]
.320
[8.1]
.126
[3.2]
.290
[7.4]
2 m CABLE x Ø .134 [3.40]
HALL EFFECT AND SOLID STATE SWITCH WITH MALE QUICK CONNECT
[M8x1]
CABLE x Ø .134 [3.40]
4.000
[102.0]
.290
[7.4]
.126
[3.2]
.325
[8.3]
.061
[1.5]
.460
[11.7]
.150
[3.8]
.320
[8.1]
(5.590 [142])
.580
[14.7]
.700
[17.8]
MODEL NO.
A
78.74
[2 m]
196.85
[5 m]
LETTER DIM.
63549-02
63549-05
PIN 2/4
WIRE COLOR
BLACK
PIN 1
WIRE COLOR
BROWN
PIN 3
WIRE COLOR
BLUE
A
� .402
[10.2]
.689 [19.3]
1.299 [34.8]
CABLE x � .177 [4.5]
63549-xx CORDSET WITH FEMALE QUICK CONNECT
NUMBERS IN [ ] ARE IN mm–IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE
All dimensions are reference only unless specifically toleranced.
SWITCHES
9-0
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
MODEL NO.
A
78.74
[2 m]
196.85
[5 m]
LETTER DIM.
63549-02
63549-05
PIN 2/4
WIRE COLOR
BLACK
PIN 1
WIRE COLOR
BROWN
PIN 3
WIRE COLOR
BLUE
A
� .402
[10.2]
.689 [19.3]
1.299 [34.8]
CABLE x � .177 [4.5]
63549-xx CORDSET WITH FEMALE QUICK CONNECT
NUMBERS IN [ ] ARE IN mm – IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE
DIMENSIONS:
SERIES 5360 REED SWITCHES
REED SWITCH REED SWITCH WITH MALE QUICK CONNECT
MODEL NO.
53602-2 & 53622-2
53609-2 & 53629-2
A
.685 [17.4]
.895 [22.7]
B
1.090 [27.7]
1.300 [33]
LETTER DIM.
BENEFITS:
SERIES 5360 REED SWITCHES
BENEFITS
■ Series 5360 Reed Switches are available for use on selected
PHD products, making it easy to interface these actuators with
various electronic controls.
■ Low profile integral clamp mounting is easy to adjust over the
entire piston travel of the cylinder or actuator.
■ Several switches may be mounted to control or initiate any
sequence or function.
■ An LED indicator provides convenient means for positioning
and troubleshooting circuits.
■ Available in a Quick Connect model for easy installation
and maintenance.
■ Special current limit model available for AC applications where
inrush might otherwise damage the switch.
53609-2*
SPECIFICATIONS 53602-2 & 53622-2 & 53629-2*
OPERATING PRINCIPLE Magnetic Reed
ACTUATED BY Moving Magnet
INPUT VOLTAGE 4.5 to 24 VDC 110 to 120 VAC
OUTPUT TYPE Contact Closure
POWER CAPACITY 4 Watt Max.2.5 Watt Max.
CURRENT RATING 200 mA. Max.Inter. Limited to 20 mA.
CONTACT RESISTANCE.200 Ohms Max.1.5 kOhm
ENVIRONMENTAL IEC IP67
OPERATING TEMP.0° to 80°C
Series 5360 Reed Switches are available in either AC or
DC models. They are ideal for use as inputs for many types of
sequencers and programmable controllers. In some cases, they can
be used to drive some relays or valve solenoids. However, electrical
transients (inrush currents or line spikes) associated with inductive
or capacitive loads can damage and shorten the life of the switch.
NUMBERS IN [ ] ARE IN mm
– IMPERIAL EQUIVALENTS
ARE PROVIDED FOR
CONVENIENCE
[M8x1]
CABLE x Ø .134 [3.40]
4.000
[102.0]
.290
[7.4]
.126
[3.2]
.325
[8.3]
.061
[1.5]
.460
[11.7]
.150
[3.8]
.320
[8.1]
(5.590 [142])
.580
[14.7]
.700
[17.8]
* CE certification not applicable to these switch models.
All dimensions are reference only unless specifically toleranced.
9-
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
SWITCHES
MODEL NO. 53602-2 & 53622-2 - NPN (SINK) OR PNP (SOURCE)
INPUT - 4.5-24 VDC
POWER CAPACITY - 4 WATT MAX.
LOAD CURRENT - 200 mA. MAX.
MODEL NO. 53609-2 & 53629-2
INPUT - 110-120 VAC
SWITCHED POWER - 2.5 WATT MAX.
INTERNAL RESISTANCE - 1.5 kOhm
SWITCH HOUSING COLOR - GREEN
CABLED MODEL 53609-2
BLACK
BROWN
BLUE
LOAD
LINE
QUICK CONNECT MODEL 53629-2
LOAD
LINE
PIN 2/4
PIN 1
PIN 3
1
2/4
3
REED WIRING SCHEMATICS
LOAD
DC
DC
CABLED MODEL 53602-2 - NPN (SINK)
CABLED MODEL 53602-2 - PNP (SOURCE)
LOAD
DC
DC
1
2/4
3
QUICK CONNECT MODEL 53622-2 - NPN (SINK)
PIN 2/4
PIN 3
PIN 1
LOAD
DC
DC
1
2/4
3
QUICK CONNECT MODEL 53622-2 - PNP (SOURCE)
PIN 2/4
PIN 1
PIN 3
LOAD
DC
DC
SWITCH HOUSING COLOR - WHITE
(Bi-polar LED emits a green light in the Sinking circuit
and a red light in the Sourcing circuit.)
BROWN
BLUE
BLACK
BROWN
BLUE
BLACK
BROWN
BLUE
BLACK
BLACK
BROWN
BLUE
BLACK
BROWN
BLUE
ENGINEERING DATA:
SERIES 5360 REED SWITCHES
All dimensions are reference only unless specifically toleranced.
SWITCHES
9-
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
ORDERING DATA:
SERIES 6250 PROXIMITY SWITCHES
CORD TYPE
0 - Cabled
1 - Quick Connect
TO ORDER SPECIFY:
SENSING
CIRCUITRY DESCRIPTION SWITCH COLOR
5-1 NPN (Sink) DC Solid State Brown
6-1 PNP (Source) DC Solid State Tan
7-1 AC/DC Reed Silver
Type, Cord Type, Sensing Circuitry,
Design No., and Cable Length.
7-1
625
0
CABLE LENGTH
02 - 2 meter length cable
(Leave blank when quick
connect is specified)
TYPE
Reed, Magnetoresistive
02
-
NOTES:
1) Cordsets for quick connect switches
must be ordered separately.
2) Other cable lengths available. Consult PHD.
PART NO.
61397-02
61397-05
CABLE LENGTH
2 meter/3 wire
5 meter/3 wire
CORDSETS WITH QUICK CONNECT
NOTE: This cordset is used for both
3-wire and 2-wire applications.
When used in 2-wire applications,
refer to the schematic and
disregard the black wire.
9-
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
SWITCHES
BENEFITS:
SERIES 6250 REED SWITCHES
BENEFITS
■ Series 6250 Reed Switches are available for use with PHD ISO
Cylinder and on other select PHD actuators which use the “M”
magnet option.
■ Series 6250 Reed Switches offer both 120 VAC or 10 to 30 VDC
sink and source operation for maximum flexibility in interfacing
with various electronic controls.
■ Special current limiting feature is designed into each switch for
protection against potential current inrush damage to switch
components.
■ Integral clamp mounting provides easy attachment and
adjustment while eliminating the cost of brackets and additional
hardware.
■ Several switches may be used on an actuator to control or
initiate a sequence or function.
■ LED indicator provides convenient means for positioning and
troubleshooting circuits.
■ Switches include either a hard wired 24 AWG, Polyurethane
(PUR) jacketed cable making it virtually impervious to chemical
or environmental damage, or an integral 8 mm screw type
connector mounted directly on the switch.
■ IP67 Environmental Protection
SPECIFICATIONS 62507-1 62517-1
SWITCH COLOR Silver
OPERATING PRINCIPLE Magnetic Reed
ACTUATED BY Moving Magnet
INPUT VOLTAGE 10 to 30 VDC or 110-120 VAC*
OUTPUT VOLTAGE Contact Closure
POWER CAPACITY 2.5 Watt Max.
CURRENT RATING Internally Limited to 25 mA.
IMPEDANCE 2.25 k Ohm
ENVIRONMENTAL IP67
OPERATING TEMP.0� to 80�C
MODEL NO. 62507-1 & 62517-1
INPUT - 10 to 30 VDC
POWER CAPACITY - 2.5 WATTS MAX.
LOAD CURRENT - 25 mA. MAX.
SWITCH HOUSING COLOR - SILVER
MODEL NO. 62507-1 & 62517-1
INPUT - 110 - 120 VAC
POWER CAPACITY - 2.5 WATTS MAX.
LOAD CURRENT - 25 mA. MAX.
INTERNAL RESISTANCE - 2.25 k Ohm
SWITCH HOUSING COLOR - SILVER
REED WIRING SCHEMATICS
CABLED MODEL 62507-1
Alternate load position for
sink circuit
BROWN
BLUE
DC
DC
LOAD
QUICK CONNECT MODEL 62517-1
1
2/4
3
PIN 1
PIN 3
DC
DC
LOAD
BROWN
BLUE
CABLED MODEL 62507-1
1
2/4
3
PIN 1
PIN 3
QUICK CONNECT MODEL 62517-1
LINE
LINE
LOAD
LOAD
Alternate load position for
sink circuit
Alternate load position for
sink circuit
LOAD
LOAD
LOAD
LOAD
Alternate load position for
sink circuit
* CE certification applicable to 10 to 30 VDC range only.
SWITCHES
9-
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
BENEFITS:
SERIES 6250 SOLID STATE SWITCHES
BENEFITS
■ Series 6250 Solid State Switches are available for use with
PHD ISO Cylinders and on other select PHD actuators which
use the “M” magnet option
■ Available in both current sinking or current sourcing models
for maximum flexibility in interfacing with various electronic
controls.
■ Series 6250 Solid State Switch circuitry protects against
voltage surges and other electrical anomalies associated with
operating systems.
■ Integral clamp mounting provides easy attachment and
adjustment while eliminating the cost of brackets and
additional hardware.
■ Several switches may be mounted to control or initiate any
sequence or function.
■ An LED indicator provides convenient means for positioning
and troubleshooting circuits.
■ Switches include either a hard wired 24 AWG, Polyurethane
(PUR) jacketed cable making it virtually impervious to chemical
or environmental damage, or an integral 8mm screw type
connector mounted directly on the switch.
■ IP67 Environmental Protection
Series 6250 Solid State Switches are designed specifically
to provide an input signal to various types of programmable
controllers or logic systems. Since Solid State Switches have no
moving parts to wear out, they offer an infinite number of trouble-
free operations. Solid State Switches operate on DC current only.
MODEL NO. 62506-1 & 62516-1 - PNP - (SOURCE)
INPUT - 10-30 VDC
LOAD CURRENT - 100 mA. MAX.
SWITCH HOUSING COLOR - TAN
(LED has been omitted from the schematic for clarity.)
MODEL NO. 62505-1 & 62515-1 - NPN - (SINK)
INPUT - 10-30 VDC
LOAD CURRENT - 100 mA. MAX.
SWITCH HOUSING COLOR - BROWN
(LED has been omitted from the schematic for clarity.)
BLACK
BROWN
BLUE
LOAD
MR
SWITCH
DC
DC
CABLED MODEL 62505-1
1
2/4
3
2/4
PIN 1
PIN 3
LOAD
MR
SWITCH
DC
DC
QUICK CONNECT MODEL 62515-1
1
2/4
3
2/4
PIN 1
PIN 3
LOAD
MR
SWITCH
DC
DC
QUICK CONNECT MODEL 62516-1
BLACK
BROWN
BLUE
LOAD
MR
SWITCH
DC
DC
CABLED MODEL 62506-1
MAGNETORESISTIVE WIRING SCHEMATICS
62505-1 & 62506-1 &
SPECIFICATIONS 62515-1 62516-1
SWITCH COLOR Brown Tan
OPERATING PRINCIPLE Magnetoresistive
ACTUATED BY Moving Magnet
INPUT VOLTAGE 10 to 30 VDC
OUTPUT TYPE NPN (Sink) PNP (Source)
CURRENT RATING 100 mA. Max.100mA. Max.
VOLTAGE DROP.5 VDC Max.
SWITCH BURDEN 12 mA. Max.
ENVIRONMENTAL IP67
OPERATING TEMP.0° to 80°C
9-
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
SWITCHES
.318
[8.1]
.660
[16.7]
.183
[4.6]
.158
[4]
.071
[1.8]
.503
[12.8]
.380
[9.6]
.682
[17.3]
1.088
[27.6]
MODEL NO.
A
78.7
[2000]
197.0
[5000]
LENGTH
3 wire
3 wire
LETTER DIM.
61397-02
61397-05
PIN 3 - BLUE WIRE
PIN 2/4 - BLACK COLOR
.335
[8.5]
PIN 1 - BROWN WIRE
CABLE x � .177 [4.5]
A
DIMENSIONS:
SERIES 6250 REED/SOLID STATE SWITCHES
REED AND SOLID STATE SWITCH
WITH QUICK CONNECT
REED AND SOLID STATE
SWITCH CABLED
.660
[16.7]
.203
[5.2]
SGNL
.876
[22.3]
.682
[17.3]
1.088
[27.6]
M8 THREAD
.660
[16.7]
.503
[12.8]
.380
[9.6]
.318
[8.1]
.071
[1.8]
61397-xx CORDSET WITH FEMALE QUICK CONNECT (SOLID STATE SWITCH)
NUMBERS IN [ ] ARE IN mm – IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE
NOTE: THIS CORDSET IS USED FOR BOTH 3-WIRE AND 2-WIRE APPLICATIONS. WHEN USED
IN 2-WIRE APPLICATIONS, REFER TO THE SCHEMATIC AND DISREGARD THE BLACK WIRE.
All dimensions are reference only unless specifically toleranced.
SWITCHES
9-
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
ORDERING DATA:
SERIES 1750 SWITCHES
ORDERING DATA
COMMON BENEFITS
■ Series 1750 switches are available for use on most Tom
Thumb and PHD products for simple interfacing to many types
of electrical controllers.
■ The compact low profile design saves space and provides
mounting versatility.
■ Low profile bracket attaches securely across two tie rods and
allows easy position adjustment over the entire piston travel of
the cylinder or actuator.
■ IP67 Environmental Protection
■ Red LED indicator provides convenient method for position
setting and troubleshooting.
■ Available in a cabled or 8 mm threaded Quick Connect model
for easy installation and maintenance.
■ 24 AWG polyurethane (PUR) jacketed cable is robust and
virtually impervious to chemical and environmental damage.
■ Multiple switches may be mounted to control or initiate any
sequence or function.
SOLID STATE BENEFITS
■ Solid state switches afford long life. Constant amplitude output
allows use with most digital logic systems.
■ Switch circuitry protects against voltage surges and other
electrical anomalies associated with operating systems.
■ Excellent switch hysteresis characteristics and symmetry.
■ Offered in 10-30 VDC current sinking and current sourcing
versions for simple interfacing to electronic system controllers.
REED BENEFITS
■ Available as either 10-30 VDC or 110-120 VAC models
for simple interfacing to sequencers and programmable
controllers.
■ Can be used to directly drive some types of relays or valve
solenoids.
CORD TYPE
0 - Cabled
2 - Quick Connect
TO ORDER SPECIFY:
SENSING
CIRCUITRY DESCRIPTION SWITCH COLOR
2-2 NPN or PNP DC Reed White
3-2 NPN DC Solid State Yellow
4-2 PNP DC Solid State Red
9-3 *AC Reed w/Current Limiting Green
Type, Cord Type, Sensing
Circuitry, Design No., and
Cable Length.
2-2
175
0
CABLE LENGTH
06 - 6 ft [1.8 m] length cable
(Leave blank when quick
connect is specified)
06
-
NOTES:
1) Cordsets for quick connect
switches must be ordered
separately. See page 9-17.
2) Other cable lengths
available. Consult PHD.
3) *CE certification not
applicable to the AC Reed
with Current Limiting model.
TYPE
Solid State, Reed
PART NO.
63549-02
63549-05
LENGTH
2 meter
5 meter
CORDSETS
WITH QUICK CONNECT
9-
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
SWITCHES
.500 [12.7] MAX
.137 [3.5] MAX
1.000
[25.4]
LED INDICATOR
.690
[17.5]
LINEAR SECTION
17000-36-0
17000-37-0
17000-40-0
17000-41-0
17000-35-0
SERIES
1000 & 2000
3000 & 4000
5000 & 6000
7000 & 8000
MINIATURE
ROTARY SECTION
17000-32-5
17000-34-5
17000-38-0
17000-39-0

COMPACT BRACKETS
ROTARY & MULTI-MOTION ACTUATORS
NPG
METRIC
19
25
29
35
19
29
35
51
75
29
35
COMPACT BRACKETS
17000-31-5
17000-32-5
17000-33-5
17000-34-5
17000-35-0
17000-36-0
17000-37-0
17000-40-0
17000-41-0
17000-33-5
17000-36-0
EA, EL,
& NEA
AV & HV
SERIES
CYLINDERS
BORE SIZE
IMPERIAL
3/4
1
1-1/8
1-3/8
3/4
1-1/8
1-3/8
2
3
1-1/8
1-3/8
COMPACT BRACKETS*
17000-51-0
17000-51-0
17000-51-0
17000-51-0
17000-51-0
17000-57-0
IMPERIAL LARGE BORE CYLINDERS
BORE SIZE
1-1/2
2
2-1/2
3-1/4*
4
5, 6, & 8
*3-1/4" Bore C
& C Cylinders
require switch
bracket
5142-54-3.
SWITCH BRACKET
DOES NOT EXTEND
BEYOND CYLINDER
OUTLINE ON THIS SIDE
.144 [3.7] MAX
.429 [10.9] MAX
1.000
[25.4]
LED INDICATOR
.700
[17.8]
17000-31-5
17000-32-5
17000-33-5
17000-34-5
17000-35-0
17000-36-0
17000-37-0
17000-40-0
17000-41-0
SWITCH BRACKET DOES NOT EXTEND
BEYOND CYLINDER OUTLINE ON THIS SIDE
DESCRIPTION
Strain relief kit for non -5 brackets (-35-0 through -41-0)
Strain relief kit for Series SD/SE Slide size 26
PART NUMBER
17494
18412
SD/SE SLIDES
BRACKET
17000-31-5
17000-32-5
17000-33-5
17000-34-5
58050-02
BORE SIZE
22
23
24
25
26
REED SWITCH
LED INDICATOR
4° TYP
6 ft [1.8 m] CABLE
x Ø .177 [4.5]
.473
[12.0]
.028 [.71]
Ø .200 [4.6]
1.000 [25.4]
.286
[7.3]
.322
[8.2]
.178
[4.52]
.323
[8.2]
MALE QUICK CONNECT DETAIL
SOLID STATE SWITCH
Ø .200 [4.6]
LED INDICATOR
1.000 [25.4]
4° TYP
.286
[7.3]
6 ft [1.8 m] CABLE
x Ø .177 [4.5]
.322
[8.2]
.178
[4.52]
.323
[8.2]
.473
[12]
MALE QUICK CONNECT DETAIL
4° TYP
.473
[12.0]
.028 [.71]
4.000
[101.6]
Ø .177 [4.5]
.286
[7.3]
.322
[8.2]
.178
[4.52]
.323
[8.2]
(5.590 [142])
.314
[8]
M8x1
NUMBERS IN [ ] ARE IN mm–IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE
SWITCH BRACKETS
17000-xx-5
DIMENSIONS:
SERIES 1750 SWITCHES
MODEL NO.
L
78.74
[2 m]
196.85
[5 m]
LETTER DIM.
63549-02
63549-05
PIN 2/4
WIRE
COLOR
BLACK
BLACK CABLE
PIN 3
WIRE COLOR
BLUE
L
1.299
[34.8]
Ø .402
[10.2]
.689
[19.3]
BLACK CONNECTOR
PIN 1
WIRE COLOR
BROWN
63549-xx CORDSET WITH FEMALE QUICK CONNECT
NOTES:
1) For alternative supplier part numbers, see page 9-5.
2) For earlier design switches 1752x-1 and 17529-2,
use cordset 17533-00-02 or 17533-00-05.
17000-xx-0
All dimensions are reference only unless specifically toleranced.
SWITCHES
9-
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
SPECIFICATIONS:
SERIES 1750 SWITCHES
17502-2 17509-3*
SPECIFICATIONS 17522-2 17529-3*
OPERATING PRINCIPLE Magnetic Reed
ACTUATED BY Piston Magnet
INPUT VOLTAGE 10-30 VDC 110-120 VAC
POWER CAPACITY 10 Watt Max.10 Watt Max.
OUTPUT TYPE Contact Closure
CURRENT RATING 200 mA.Inter. Limited
Switched to 85 mA.
CONTACT RESISTANCE.1 Ohm Max..1 Ohm Max.
ENVIRONMENTAL IP67
OPERATING TEMP.0° to 80°C
SPECIFICATIONS 17503-2 & 17523-2 17504-2 & 17524-2
OPERATING PRINCIPLE Solid State
ACTUATED BY Piston Magnet
INPUT VOLTAGE 10-30 VDC
OUTPUT TYPE NPN (Sink) PNP (Source)
CURRENT RATING 20 mA. Max 100 mA. Max
VOLTAGE DROP.5 VDC
SWITCH BURDEN 10 mA. Max.
ENVIRONMENTAL IP67
OPERATING TEMP.0° to 80°C
* CE certification not applicable to these switch models.
MODEL NO. 17504-2 & 17524-2 - PNP (SOURCE)
INPUT - 10-30 VDC
LOAD CURRENT - 100 mA. MAX.
SWITCH HOUSING COLOR - RED
(LED’s have been omitted from the schematic for clarity.)
MODEL NO. 17503-2 & 17523-2 - NPN (SINK)
INPUT - 10-30 VDC
LOAD CURRENT - 20 mA. MAX.
SWITCH HOUSING COLOR - YELLOW
(LED’s have been omitted from the schematic for clarity.)
BLACK
BROWN
BLUE
LOAD
SWITCH
DC
DC
CABLED MODEL 17503-2
PIN 2/4
PIN 1
PIN 3
LOAD
SWITCH
DC
DC
QUICK CONNECT MODEL 17524-2
BLACK
BROWN
BLUE
LOAD
SWITCH
DC
DC
CABLED MODEL 17504-2
SOLID STATE WIRING SCHEMATICS
MODEL NO. 17502-2 & 17522-2 - NPN (SINK) OR PNP (SOURCE)
INPUT - 10-30 VDC
POWER CAPACITY - 3 WATT MAX.
LOAD CURRENT - 200 mA. MAX.
SWITCH HOUSING COLOR - WHITE
(Bi-polar LED emits a red light.)
MODEL NO. 17509-3 & 17529-3
INPUT - 120 VAC
SWITCHED POWER - 3 WATT MAX.
INTERNAL RESISTANCE - 1.5 kOhm
SWITCH HOUSING COLOR - GREEN
CABLED MODEL 17509-3
LOAD
LINE
REED WIRING SCHEMATICS
BROWN
BLACK
BLUE
LOAD
DC
DC
CABLED MODEL 17502-2 - NPN (SINK)
CABLED MODEL 17502-2 - PNP (SOURCE)
LOAD
DC
DC
BROWN
1
2/4 BLACK
3
BLUE
PIN 2/4
PIN 1
PIN 3
LOAD
SWITCH
DC
DC
QUICK CONNECT MODEL 17523-2
BROWN
1
2/4 BLACK
3
BLUE
QUICK CONNECT MODEL 17522-2 - NPN (SINK)
PIN 2/4
PIN 3
PIN 1
LOAD
DC
DC
BROWN
1
2/4 BLACK
3
BLUE
QUICK CONNECT MODEL 17522-2 - PNP (SOURCE)
PIN 2/4
PIN 1
PIN 3
LOAD
DC
DC
BROWN
1
2/4 BLACK
3
BLUE
LOAD
LINE
PIN 2/4
PIN 1
PIN 3
BROWN
1
2/4 BLACK
3
BLUE
BROWN
BLACK
BLUE
BROWN
BLACK
BLUE
QUICK CONNECT MODEL 17529-3
9-9
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
SWITCHES
ORDERING DATA:
SERIES 5580 PROXIMITY SWITCHES
BENEFITS
■ Series 5580 Proximity Switches are available for use on
selected PHD products making it easy to interface these
actuators with various electronic controls.
■ Hall Effect Switches are solid state for long life and elimination
of contact bounce. Constant amplitude output is provided for
use with most digital logic systems.
■ Low profile mounting is easy to adjust at the ends of travel of
the slide or gripper.
■ LED indicator provides convenient means for positioning and
troubleshooting circuits. An LED shows when the switch output
is on.
■ Available in a Quick Connect model for easy installation and
maintenance.
HALL EFFECT
PHD Series 5580 Hall Effect Proximity Switches are
designed specifically to provide an input signal to various types
of programmable controllers or logic systems. Since Hall Effect
Switches are solid-state, there are no moving parts to wear out. The
switches offer an infinite number of trouble-free operations. Hall
Effect Switches operate on DC current only.
REED
PHD Series 5580 Reed Switches are available in a DC model.
They are ideal for use as inputs for many types of sequencers and
programmable controllers. In some cases, they can be used to
drive some relays or valve solenoids. However, electrical transients
(inrush currents or line spikes) associated with inductive or
capacitive loads can damage and shorten the life of the switch.
SPECIFICATIONS 55803 & 55823 55804 & 55824
OPERATING PRINCIPLE Hall Effect
ACTUATED BY Target Magnet
INPUT VOLTAGE 4.5 to 24 VDC
OUTPUT TYPE NPN (Sink) PNP (Source)
CURRENT RATING 20 mA. Max.100 mA. Max.
VOLTAGE DROP.5 VDC Max.
SWITCH BURDEN 12 mA. Max.
ENVIRONMENTAL IP67
OPERATING TEMP.0° to 80°C
SPECIFICATIONS 55802 & 55822
OPERATING PRINCIPLE Magnetic Reed
ACTUATED BY Target Magnet
INPUT VOLTAGE 4.5 to 24 VDC
OUTPUT TYPE NPN (Sink) or
PNP (Source)
CURRENT RATING 200 mA. Switched
CONTACT RESISTANCE.090 Ohm Max.
ENVIRONMENTAL IP67
OPERATING TEMP.0° to 80°C
TYPE
Hall, Reed
TO ORDER SPECIFY:
Type, Cord Type, Sensing Circuitry,
Design No., and Cable Length.
2-1
558
0
CABLE LENGTH
02 - 2 meter length cable
(Leave blank when quick
connect is specified)
02
-
NOTES:
1) Cordsets for quick connect switches
must be ordered separately.
2) Other cable lengths available. Consult PHD.
CORD TYPE
0 - Cabled
2 - Quick Connect
SENSING
CIRCUITRY DESCRIPTION SWITCH COLOR
2 - 1 NPN or PNP DC Reed White
3 - 1 NPN DC Hall Yellow
4 - 1 PNP DC Hall Red
PART NO.
63549-02
63549-05
LENGTH
2 meter
5 meter
CORDSETS
WITH QUICK CONNECT
SWITCHES
9-0
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
63549-xx CORDSET WITH FEMALE QUICK CONNECT
DIMENSIONS:
SERIES 5580 PROXIMITY SWITCHES
HALL EFFECT AND REED SWITCH
HALL EFFECT AND REED SWITCH WITH MALE QUICK CONNECT
1.180 [30.0]
.118
[3.0]
2 m CABLE x
Ø
.134 [3.4]
.236 [6.0]SQ
.118
[3.0]
MODEL NO. 55804 & 55824 - PNP (SOURCE)
INPUT - 4.5-24 VDC
LOAD CURRENT - 100 mA. MAX.
SWITCH HOUSING COLOR - RED
(LED has been omitted from the schematic for clarity.)
MODEL NO. 55803 & 55823 - NPN (SINK)
INPUT - 4.5-24 VDC
LOAD CURRENT - 20 mA. MAX.
SWITCH HOUSING COLOR - YELLOW
(LED has been omitted from the schematic for clarity.)
BLACK
BROWN
BLUE
LOAD
SWITCH
DC
DC
CABLED MODEL 55803
BLACK
BROWN
BLUE
LOAD
SWITCH
DC
DC
CABLED MODEL 55804
PIN 2/4
PIN 1
PIN 3
LOAD
SWITCH
DC
DC
QUICK CONNECT MODEL 55824
HALL EFFECT WIRING SCHEMATICS
REED WIRING SCHEMATICS
PIN 2/4
PIN 1
PIN 3
LOAD
SWITCH
DC
DC
QUICK CONNECT MODEL 55823
MODEL NO. 55802 & 55822 - NPN (SINK) OR PNP (SOURCE)
INPUT - 4.5-24 VDC
(Bi-polar LED emits a green light in the Sinking circuit and a red light in the Sourcing circuit.)
BLACK
BROWN
BLUE
DC
DC
PIN 2/4
PIN 1
PIN 3
LOAD
DC
DC
PIN 2/4
PIN 1
PIN 3
LOAD
DC
DC
CABLED MODEL 55802 - NPN (SINK)
QUICK CONNECT MODEL 55822 - NPN (SINK)
CABLED MODEL 55802 - PNP (SOURCE)
QUICK CONNECT MODEL 55822 - PNP (SOURCE)
LOAD CURRENT - 200 mA. MAX.
SWITCH HOUSING COLOR - WHITE
DC
DC
BLACK
BLUE
BROWN
LOAD
LOAD
BROWN
1
2/4 BLACK
3
BLUE
BROWN
1
2/4 BLACK
3
BLUE
BROWN
1
2/4 BLACK
3
BLUE
BROWN
1
2/4 BLACK
3
BLUE
NUMBERS IN [ ] ARE IN mm–IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE
[M8x1]
CABLE x

.134 [3.40]
4.000
[102.0]
1.180 [30.0]
(5.550 [141])
.236 [6.0] SQ
MODEL NO.
A
78.74
[2 m]
196.85
[5 m]
LETTER DIM.
63549-02
63549-05
PIN 2/4
WIRE COLOR
BLACK
PIN 1
WIRE COLOR
BROWN
PIN 3
WIRE COLOR
BLUE
A
� .402
[10.2]
.689 [19.3]
1.299 [34.8]
CABLE x � .177 [4.5]
All dimensions are reference only unless specifically toleranced.
9-
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
SWITCHES
ORDERING DATA
NOTE: Cordsets for quick connects
must be ordered separately.
TO ORDER SPECIFY:
Product Type, Cable Type,
Sensing Circuitry
9-2679
2
SENSING CIRCUITRY
9-2 AC Reed
CABLE TYPE
2 - Quick Connect
PRODUCT TYPE
Reed
PART NO.
63549-02
63549-05
LENGTH
2 meter
5 meter
CORDSETS
WITH QUICK CONNECT
BENEFITS
■ Model 67929-2 Switches are available for use on many
actuators.
■ Saving space and providing mounting versatility, the round
design fits into grooves in the body of the actuator.
■ IP67 Environmental Protection
■ LED indicator provides convenient method for position setting
and troubleshooting.
■ Available in 8 mm threaded Quick Connect model for easy
installation and maintenance.
■ 28 AWG Polyurethane (PUR) jacketed cable
■ Multiple switches may be mounted to control or initiate any
sequence or function.
■ Available in 65 - 120 VAC model for simple interfacing to
sequencers and programmable controllers.
■ Can be used to directly drive some types of relays or valve
solenoids within the switch specifications stated.
65 - 120 VAC
25 mA Max.
1.5 k Ohm
SPECIFICATIONS
OPERATING PRINCIPLE
ACTUATED BY
INPUT VOLTAGE
OUTPUT TYPE
CURRENT RATING
ENVIRONMENTAL
OPERATING TEMP.
IMPEDANCE
67929-2
Magnetic Reed
Piston Magnet
Contact Closure
IP67
-20� to 85�C
ORDERING DATA:
MODEL 67929-2 AC REED SWITCH
SWITCHES
9-22
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
BENEFITS:
MODEL 67929-2 AC REED SWITCH
MODEL NO.
63549-02
63549-05
LETTER DIM.
L
78.74 [2 m]
196.85 [5 m]
PIN 2/4
WIRE COLOR
BLACK
BLACK CABLE
PIN 3
WIRE COLOR
BLUE
L
1.299
[34.8]
Ø .402
[10.2]
.689
[19.3]
BLACK CONNECTOR
PIN 1
WIRE COLOR
BROWN
63549-xx CORDSET WITH FEMALE QUICK CONNECT
MODEL NO. 67904-1 & 67924-1 - PNP (SOURCE)
INPUT: 4.5-30 VDC
LOAD CURRENT:

50 mA. MAX.
SWITCH HOUSING COLOR: BLACK
(Bi-polar LED emits a red light.)
MODEL NO. 67903-1 & 67923-1 - NPN (SINK)
INPUT: 4.5 - 30 VDC
LOAD CURRENT: 50 mA. MAX.
SWITCH HOUSING COLOR: BLACK
(Bi-polar LED emits a yellow light)
SOLID STATE WIRING SCHEMATICS
MODEL NO. 67902-1 & 67922-1 - NPN (SINK) OR PNP (SOURCE)
INPUT: 4.5 - 30 VDC
LOAD CURRENT: 50 mA. MAX.
IMPEDANCE: .12 Ohm MAX.
SWITCH HOUSING COLOR: BLACK
(LED emits a red light)
REED WIRING SCHEMATICS
CABLED MODEL 67902 - NPN (SINK) CABLED MODEL 67902 - PNP (SOURCE)
QUICK CONNECT MODEL 67923
QUICK CONNECT MODEL 67922 - NPN (SINK) QUICK CONNECT MODEL 67922 - PNP (SOURCE)
CABLED MODEL 67903
QUICK CONNECT MODEL 67924
BLACK
BROWN
BLUE
LOAD
SWITCH
DC
DC
PIN 2/4
PIN 1
PIN 3
LOAD
SWITCH
DC
DC
CABLED MODEL 67904
BLACK
BROWN
BLUE
LOAD
SWITCH
DC
DC
PIN 2/4
PIN 1
PIN 3
LOAD
SWITCH
DC
DC
BROWN
1
2/4 BLACK
3
BLUE
BROWN
BLACK
BLUE
LOAD
DC
DC
PIN 2/4
PIN 3
PIN 1
LOAD
DC
DC
BROWN
1
2/4 BLACK
3
BLUE
LOAD
DC
DC
BROWN
BLACK
BLUE
PIN 2/4
PIN 1
PIN 3
LOAD
DC
DC
BROWN
1
2/4 BLACK
3
BLUE
BROWN
1
2/4 BLACK
3
BLUE
SWITCH
SWITCH
SWITCH
SWITCH
MODEL NO. 67929-2
INPUT: 65 - 120 VDC
LOAD CURRENT: 25 mA. MAX.
IMPEDANCE: 1.5 k Ohm
SWITCH HOUSING COLOR: BLACK
(LED emits a red light)
AC REED WIRING SCHEMATICS
QUICK CONNECT MODEL 67929
PIN 2/4
PIN 3
PIN 1
LOAD
BROWN
1
2/4 BLACK
3
BLUE
SWITCH
LINE
3-48 x 3/16 [4.8]
SET SCREW .050 [1.3] HEX*
.180 [4.6]
.102 [2.6]
.134 [3.4]
.236 [6]
1.736 [44]
Ø .315 [8]
.260 [6.6]
M8 x 1 THREAD
LED
.078 [2]
.136 [3.5]
.777 [19.7]
1.100 [27.9]
.156 [3.9]
.108 [2.7]
.095 [2.4]
MALE QUICK CONNECT DETAIL
*MAX. SCREW TORQUE 1.0 in-lb [.110 Nm]
METRIC INFORMATION SHOWN IN [ ]
12.0 [305]
All dimensions are reference only unless specifically toleranced.
9-
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
SWITCHES
DC INDUCTIVE PROXIMITY SWITCHES
4 mm ROUND
PART NO.
18430-001-02
18430-002-02
DESCRIPTION
NPN (Sink) 10-30 VDC, 2 meter cable
PNP (Source) 10-30 VDC, 2 meter cable
2 meter cordset for all Series 5580 Switches with Quick
Connect. Other cable lengths available - contact PHD.
6 mm SQUARE
PART NO.
18431-001-02
18431-002-02
DESCRIPTION
NPN (Sink) 10-30 VDC, 2 meter cable
PNP (Source) 10-30 VDC, 2 meter cable
2 meter cordset for all Series 5580 Switches with Quick
Connect. Other cable lengths available - contact PHD.
8 mm THREADED
PART NO.
51422-005-02
51422-006-02
DESCRIPTION
NPN (Sink) 10-30 VDC, 2 meter cable
PNP (Source) 10-30 VDC, 2 meter cable
2 meter cordset for all Series 5580 Switches with Quick
Connect. Other cable lengths available - contact PHD.
BENEFITS
■ High reliability provided by solid state inductive sensing
technology.
■ Ease of mounting with PHD’s Proximity Switch Bracket Kit and
Target Kits for grippers. These kits include all hardware for
mounting the switch and the target that is used to actuate the
switch. (See Slide and Gripper sections for details.)
■ Suitable for plant environments where dirt and contamination
create difficulties for electromechanical and other types of
switches.
■ LED indicator circuits are standard on 4 mm round, 6 mm
square, and 8 mm threaded and provide a convenient means of
positioning and troubleshooting.
18430-001-02 18430-002-02
SPECIFICATIONS 18431-001-02 18431-002-02 51422-005-02 51422-006-02
INPUT VOLTAGE 10 to 30 VDC 10 to 30 VDC 10 to 30 VDC 10 to 30 VDC
OUTPUT TYPE NPN (Sink) PNP (Source) NPN (Sink) PNP (Source)
SENSING RANGE 0.8 mm Max.0.8 mm Max.1.5 mm Max.1.5 mm Max.
OUTPUT CURRENT RATING 100 mA. Max.100 mA. Max.200 mA. Max.200 mA. Max.
SWITCH BURDEN 10 mA. Max.10 mA. Max.10 mA. Max.10 mA. Max.
VOLTAGE DROP 2.5 VDC Max.2.5 VDC Max.1.0 VDC Max.1.0 VDC Max.
CIRCUIT PROTECTION Yes Yes No No
REVERSE VOLTAGE Yes
OUTPUT STATE Normally Open
ENVIRONMENTAL IP67
15561-001
10 to 30 VDC
NPN (Sink)
1.6 mm Max.
200 mA Max.
8 mA Max.
1.5 V Max.
Yes
15561-002
10 to 30 VDC
PNP (Source)
1.6 mm Max.
200 mA Max.
8 mA Max.
1.5 V Max.
Yes
Yes
Normally Open
IP68
15561-003
20 to 250 VAC
Solid State
1.6 mm Max.
130 mA Max.

11 V Max.
No
BLACK
BROWN
BLUE
LOAD
SWITCH
DC
DC
MODEL 15561-001
18430-001-02
18431-001-02
51422-005-02
BLACK
BROWN
BLUE
LOAD
SWITCH
DC
DC
MODEL 15561-002
18430-002-02
18431-002-02
51422-006-02
WIRING SCHEMATICS
BROWN
BLUE
SWITCH
NEUTRAL
LINE
LOAD
AC
MODEL 15561-003
DC NPN (Sink) DC PNP (Source)
12 mm THREADED
PART NO.
15561-001
15561-002
15561-003
DESCRIPTION
NPN (Sink) 10-30 VDC, 3 meter cable
PNP (Source) 10-30 VDC, 3 meter cable
20-250 VAC, 3 meter cable
SWITCHES
9-
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
SERIES 62002 8 mm ROUND
THREADED PROXIMITY SWITCH
SERIES 62002 SWITCHES
SERIES 62002 PROXIMITY WIRING SCHEMATICS
BROWN
BLUE
LOAD
SWITCH
DC
DC
MODEL NO. 62002-1-02 - NPN (SINK) OR PNP (SOURCE)
INPUT - 4.5-24 VDC
POWER CAPACITY - 1.0 WATT MAX.
LOAD CURRENT - 40 mA MAX.
CABLED MODEL 62002 - PNP (SOURCE) CABLED MODEL 62002 - NPN (SINK)
BROWN
BLUE
LOAD
SWITCH
DC
DC
SPECIFICATIONS 62002-1-02
OPERATING PRINCIPLE Magnetic Reed
ACTUATED BY Target Magnet
INPUT VOLTAGE 4.5 to 24 VDC
OUTPUT VOLTAGE Contact Closure
POWER CAPACITY 1.0 Watt Max.
CURRENT RATING 40 mA Max.
CONTACT RESISTANCE.200 Ohm Max.
ENVIRONMENTAL IP67
OPERATING TEMP.0� to 70�C
PART NO.
62002-1-02
DESCRIPTION
8 mm Threaded Reed Switch with 2 meter cable
1.075
[27.31]
2x .160
[4.1]
.085
[2.16]
2x .265
[6.73]
(M8 x 1.0-6g THREAD)
M8 HEX NUT (2 SUPPLIED)
LED IN THIS APPROX LOCATION
.220
[5.59]
.984 � .080
[25 � 2.03]
.59
[14.99]
.51
[12.95]
.795
[20.19]
.990
[25.15]
74.74 � .79
[1900 � 20]
.276 � .040
[7 � 1]
NUMBERS IN [ ] ARE IN mm – IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE
All dimensions are reference only unless specifically toleranced.
9-
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
SWITCHES
BENEFITS
■ Provides independent and fully adjustable multiple position
sensing on Series 8400 Angular Grippers, Series 190 & 191
Parallel and 190 Angular Grippers, Series 5300 Oval Grippers,
and all Rotary Actuators and Multi-Motion Actuators.
■ Independent adjustment of two set point positions from
two sensors allows one set point module to interface with
two actuators. Or, can be used with a single unit providing 4
adjustable set points throughout jaw travel or rotation.
■ Solid state electronics with Hall Effect sensing technology for
an infinite number of trouble-free cycles.
■ Wide signal range capability permits interfacing with most
programmable controllers and other logic systems.
■ LED indicators for visual confirmation of each output state.
■ Set Point Module is available for either current sinking or
current sourcing models with 4.5 to 24 VDC output capability.
BENEFITS:
HALL SENSOR WITH SET POINT MODULE
SPECIFICATIONS 9800-01-0300 9800-01-0400
OPERATING PRINCIPLE Linear Hall Effect
INPUT VOLTAGE 18 to 24 VDC
OUTPUT TYPE NPN (Sink) PNP (Source)
Open Collector Collector Output
OUTPUT VOLTAGE 4.5 to 24 VDC
OUTPUT CURRENT RATING 200 mA. Max.
OUTPUT VOLTAGE DROP.4 VDC Max..5 VDC Max.
at Rated Current at 50 mA.
SWITCH BURDEN 150 mA. Max.
OPERATING TEMP.0° to 60°C (32° to 140°F)
HUMIDITY 5 to 95%
(NON CONDENSING)
ORDERING DATA:
HALL SENSOR WITH SET POINT MODULE
DUAL INPUT SET POINT MODULE
PART NO.
9800-01-0300
9800-01-0400
DESCRIPTION
NPN (Sink) 4.5-24 VDC
PNP (Source) 4.5-24 VDC
2 meter cordset for all Series 5580 Switches with Quick
Connect. Other cable lengths available - contact PHD.
HALL SENSOR KIT
FOR SERIES 190, 191, & 8400 MINIATURE GRIPPERS
DESCRIPTION
Size 6 Models 19x60, 19x61, & 19x62 Parallel
Size 7 Models 19x70, 19x71, & 19x72 Parallel
Size 8 Models 19x80, 19x81, & 19x82 Parallel
Size 9 Models 19x90, 19x91, & 19x92 Parallel
Size 0 Model 19x02 Angular
Size 1 Model 19x12 Angular
Size 2 Model 19x22 Angular
Size 3 Model 19x32 Angular
8400 Gripper Angular
8410 Gripper Angular
8420 Gripper Angular
8430 Gripper Angular
PART NO.
IMPERIAL METRIC
18674-04 18057-04
18675-04 18058-04
18676-04 18059-04
18677-04 18060-04
— 18057-04
— 18058-04
— 18059-04
— 18060-04
10906-12 —
10907-12 —
10908-12 —
18686-04 —
HALL EFFECT SENSOR/TRANSDUCER
The Sensor/Transducer must be ordered as part of the Gripper
or Actuator assembly. The Sensor/Transducer will be mounted to
the unit with a transition plate. See individual unit Ordering Data for
availability and ordering information. Individual replacement
sensors are ava
ilable as shown.
APPLICATIONS
GRIPPERS
■ Provides two adjustable sensing positions throughout jaw
travel for two grippers (through a single set point module).
■ Allows the assurance of part presence by ensuring the jaws
have closed or opened to the proper size.
■ Permits “go, no go” type gauging to occur as parts are
gripped.
ROTARY ACTUATORS &
MULTI-MOTION ACTUATORS
■ Provides two adjustable sensing positions throughout
the 180° rotation of two rotary actuators or multi-motion
actuators.
■ Can be used to signal ends of rotation of two units.
INDIVIDUAL REPLACEMENT SENSORS
PART NO.
10688-2-12
10832-1-1-12
DESCRIPTION
Sensor for all 8600, 7900, and 5300 Angular Grippers,
and 8600 Parallel Grippers
Sensor for all Rotary Actuators and Multi-Motion Actuators
NOTE: All sensors come with 12 ft [3 m] minimum of shielded cable.
SWITCHES
9-
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
10688-2-012 BASIC HALL SENSOR
SERIES 7900, 8600 3-JAW, & 5300
ANGULAR GRIPPERS
GRIPPER
MODEL NO.
792x, 862x, & 1532x
793x, 863x, & 1533x
794x, 864x, & 1534x
795x, 865x, & 1535x
A
.854 [21.5]
.917 [23.5]
1.112 [28.5]
1.586 [40.5]
B
1.257 [32.0]
1.540 [39.0]
1.945 [49.5]
2.500 [63.5]
LETTER DIMENSION
C
0.00 [0.0]
.122 [3.0]
.247 [6.0]
.441 [11.0]
30°
B
A
C
2X THRU HOLE
FOR #6 SCREWS
.625 [28.5]
.125
[28.5]
.375
[9.5]
.500 [13.0]
1.125
[28.5]
12 FT [4 m] OF SHIELDED
CABLE IS INCLUDED WITH SENSOR
.237 [6.0]
.246
[6.0]
SERIES 190 & 191
PARALLEL GRIPPERS
GRIPPER
MODEL NO.
19x6x
19x7x
19x8x
19x9x
A
1.437 [36.5]
1.555 [39.5]
1.810 [46.0]
2.283 [58.0]
B
.650 [16.5]
.550 [14.0]
.295 [7.5]
.295 [7.5]
LETTER DIMENSION
C
.787 [20.0]
.985 [25.0]
1.496 [38.0]
1.968 [50.0]
C
.375
[9.5]
.187
[5.0]
A
B
A
.375
[5.0]
.187
[9.5]
C
B
GRIPPER MODEL NO.
IMPERIAL METRIC
840x 19002
841x 19012
842x 19022
843x 19032
A
1.354 [36.5]
1.454 [39.5]
1.704 [46.0]
2.237 [58.0]
B
.654 [16.5]
.554 [14.0]
.304 [7.6]
.300 [7.6]
LETTER DIMENSION
C
.700 [20.0]
.900 [25.0]
1.400 [38.0]
1.910 [50.0]
SERIES 8400 &
190 A
NGULAR GRIPPERS
DUAL INPUT SET POINT LOGIC EXAMPLE
Both gripper jaws are wide open. No set
points are made.
The jaws of gripper A are closed to grip a
part and are wide open on gripper B. One
set point is made for gripper A.
Both gripper jaws are closed to grip a part.
Two set points are made, one for gripper A
and one for gripper B.
Gripper A jaws are closed all the way (no
parts) and Gripper B jaws are closed to grip
a part. Two set points for gripper A and one
set point for gripper B are made.
Both gripper jaws are closed all the way (no
parts). Two set points are made for both
grippers A and B.
In the event one gripper is wide open (A)
and the other is closed all the way (B), only
the two set points for the closed gripper
would be made.
CASE 1 CASE 2 CASE 3 CASE 4
CASE 5 CASE 6
A B
A B
A
B
A
B
A B
A B
CASE
1
2
3
4
5
6
SET POINT OUTPUT
A1
0
1
1
1
1
0
A2
0
0
0
1
1
0
B1
0
0
1
1
1
1
B2
0
0
0
0
1
1
DIMENSIONS:
HALL SENSOR & SET POINT MODULE
All dimensions are reference only unless specifically toleranced.
9-
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
SWITCHES
DIMENSIONS:
HALL SENSOR & SET POINT MODULE
NUMBERS IN [ ] ARE IN mm – IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE
SERIES 1000-8000 ROTARY ACTUATORS &
MULTI-MOTION ACTUATORS
ACTUATOR
SERIES
1000 & 2000
3000 & 4000
5000 & 6000
7000 & 8000
A
2.980 [75.7]
4.230 [107.4]
4.980 [126.5]
7.980 [202.7]
B
2.000 [50.8]
3.000 [76.2]
4.000 [101.6]
5.000 [127.0]
LETTER DIM.
3 m SHIELDED CABLE FROM THIS SIDE
ON SERIES 1000 & 2000 UNITS ONLY
B
.500 [12.7]
3 m SHIELDED CABLE FROM THIS SIDE
ON SERIES 3000-8000 UNITS
LIMITATIONS: SENSOR MAY BE USED ON UNITS WITH MAXIMUM ROTATION
UP TO AND INCLUDING 180°
A
MODEL 9800-01-0300
NPN (SINK)
MODEL 9800-01-0400
PNP (SOURCE)
BLACK
COMMON
18-24 VDC
POWER SUPPLY
INPUT TO
PROGRAMMABLE
CONTROLLER
BLACK
RED
RED
WHITE
WHITE
OUTPUTS A1 & A2
OUTPUTS B1 & B2
1
2
3
4
5
6
7
8
9
10
BLACK
COMMON
PRIMARY
SUPPLY
INPUT TO
PROGRAMMABLE
CONTROLLER
RED
WHITE
WHITE
OUTPUTS A1 & A2
OUTPUTS B1 & B2
1
2
3
4
5
6
7
8
9
10
A
B
A
B
OPTIONAL -
REQUIRED ONLY IF
DESIRED SOURCE
OUTPUT VOLTAGE IS
OTHER THAN THAT
OF PRIMARY SUPPLY
IF OUTPUT VOLTAGE
REQUIRED IS THE
SAME AS THE PRIMARY
SUPPLY ATTACH A
JUMPER BETWEEN
TERMINALS 1 & 10
18-24 VDC
POWER SUPPLY
BLACK
RED
ENGINEERING DATA:
HALL SENSOR WITH SET POINT MODULE
WIRING SCHEMATICS
Diagrams are typical for many programmable
controller interface applications. Modules may
also be used to signal TTL. CMOS, relays or solenoids
within rated electrical specifications.
NOTE: For single applications where four
outputs are desired, install a jumper between
terminals 4 & 5.
SET POINT MODULE #9800-01-0x00
+ 18 - 24 VDC
-0 VDC
TRNS POS
TRNS SIG A
TRNS SIG B
OUTPUT A1
OUTPUT A2
OUTPUT B1
OUTPUT B2
+ 4,5-24
VDC
SOURCE
ONLY
3.470 [88.0]
.270
[7.0]
.905
[23.0]
2.190
[55.6]
3.720
[94.5]
.490
[12.5]
2.220 [56.5]
4X SET POINT MADE
LED INDICATORS
4X THRU HOLE FOR
#8 [M4] SCREW
.140 [3.5]
4.000
[101.5]
.750
[22.0]
.220
[5.5]
4X SET POINT
ADJUSTMENT
.295
[7.5]
3.410
[86.5]
NUMBERS IN [ ] ARE IN mm – IMPERIAL
EQUIVALENTS ARE PROVIDED FOR CONVENIENCE
All dimensions are reference only unless specifically toleranced.
SWITCHES
9-
www.phdinc.com/products/switchesandsensors

(800) 624-8511
CAT-08
BENEFITS & DIMENSIONS:
BRACKETS FOR NFPA CYLINDERS
BENEFITS
■ Allows PHD Series 1750 Reed and Hall Effect
Switches to be mounted to 1-1/2" [38.1 mm] to 8"
[203.2 mm] bore NFPA Cylinders.
■ The brackets’ flexible design means only two
brackets are required to cover 8 sizes of NFPA
Cylinders.
■ The extruded aluminum bracket attaches securely
to a single tierod and does not allow the switch to
pull away from the cylinder barrel.
■ The low profile of the switch and bracket saves
space and provides additional mounting flexibility.
■ Optional strain relief clamp may be used to protect
the switch cable from damage at the switch due to
flexing.
PART NO.
17509-3-06
17502-2-06
17529-3
17522-2
17503-2-06
17504-2-06
17523-2
17524-2
DESCRIPTION
AC Reed
DC Reed
AC Reed, Quick Connect
DC Reed, Quick Connect
Hall Effect NPN (Sink)
Hall Effect PNP (Source)
Hall Effect NPN (Sink), Quick Connect
Hall Effect PNP (Source), Quick Connect
NFPA CYLINDER
BORE
1-1/2, 2, 2-1/2,
3-1/4, & 4
5, 6, & 8
SWITCH BRACKET
NUMBER
17000-51-0
17000-57-0
STRAIN RELIEF
BRACKET
18412
18412
PHD SWITCH MODELS
See pages 9-16 to 9-18 for switch information. NFPA cylinder must have the proper magnetic piston for the PHD Switches
to function correctly.
17000-xx-0 NFPA SWITCH BRACKET
18412 CABLE RESTRAINT KIT
1.000
[25.4]
LED INDICATOR
A REF
C SQ REF
B REF
OPTIONAL CABLE
RESTRAINT BRACKET
D REF DIA
BORE
SIZE
1-1/2
2
2-1/2
3-1/4
4
5
6
8
A
1.375
1.500
1.750
2.000
2.375
3.000
3.375
4.000
B
1.500
1.750
1.875
2.187
2.500
3.125
3.375
4.125
LETTER DIMENSION
C
2.000
2.500
3.000
3.750
4.500
5.500
6.500
8.500
D
.250
.312
.312
.375
.375
.500
.500
.625
PART NO.
17502-2-06
17509-3-06
17503-2-06
17504-2-06
DESCRIPTION
DC Reed NPN/PNP (White)
AC Reed (Green)
Solid State NPN (Yellow)
Solid State PNP (Red)
PHD SWITCH MODELS
(BY ORDERING DATA CODES)
3MR .........................................6-13
3R1, 3R2, 4R1,
4R2, 5R1, 5R2 ................5-69, 5-81
5MAV, 5MH ..............................6-25
160.............................................3-3
190, 191...................................4-77
5300..............................4-87, 4-123
8400.......................................4-107
A, AV Cleanroom ....................1-113
A2 ............................................1-87
A3, A3V....................................1-95
AV2 ..........................................1-87
BCN ...........................................8-1
BCS ...........................................8-1
BCZ ...........................................8-1
BST ............................................8-1
CRD ...........................................1-5
CRS ...........................................1-5
CTD .........................................1-19
CTS .........................................1-19
CVA ..........................................1-29
CVB .........................................1-29
CVC .........................................1-29
GRB ........................................4-113
GRC .........................................4-39
GRD .........................................4-21
GRF .........................................4-69
GRL .........................................4-61
GRR .........................................4-91
GRS ..........................................4-11
GRT .........................................4-51
GRW ........................................4-31
H3V..........................................1-95
HV2..........................................1-87
LC .............................................3-11
MA1, MA2, MH1, MH2...............6-3
PA ..............................................7-3
PB ..............................................7-7
PEC .........................................7-25
PFC .......................................4-129
PHL ..........................................7-21
PLK ..........................................7-29
PNC .........................................7-13
R1 ............................................5-57
R2 ............................................5-57
RA ............................................5-31
RCC ...........................................5-3
RF ..............................................5-9
RI .............................................5-41
RL ............................................5-19
SCA ................................1-53, 1-67
SCAV ..............................1-53, 1-67
SCHV..............................1-53, 1-67
SCNHG, SCNPG ...................1-105
SCV .........................................2-73
SD............................................2-37
SE ............................................2-37
SFM .........................................2-93
SFP ..........................................2-83
SG ..........................................2-117
SHP .........................................2-15
SIP ...........................................2-21
SK ............................................2-55
SL ............................................2-55
SM .........................................2-107
SRNPG, SRNHG ...................1-105
STP ............................................2-5
SxH, SxL ..................................2-27
Switches, all...............................9-1
TD ............................................1-79
product
index
All dimensions are reference only unless specifically toleranced.