Einstein Manualx - Fortress Secure Solutions Fortress Secure ...

licoricehealthΤεχνίτη Νοημοσύνη και Ρομποτική

14 Νοε 2013 (πριν από 3 χρόνια και 8 μήνες)

107 εμφανίσεις

THE EINSTEIN







OWNER’S MANUAL

Table of contents










Introduction…………………………………………………….….………… 1

User notice ……………………………………………………………..…… 2

System Summary ………………..……………………….………….…… 3

Main components …………………………………………….………. 4
-
9

Installation:



Einstein central panel …………..……………….…..… 10
-
12


Programming sensors (general) ……………….……… 14


Programming wireless door/window sensors ….… 15


Programming wireless glass break sensors ..……. 16


Programming wireless smoke detector ……..……. 17


Programming wireless motion detectors …..….... 18


Programming wireless horns ……………………..…… 19


Programming wireless gas leak sensors ..……..…. 20


Programming extra
keyfob

remotes ………..…...… 21


Programming pre
-
existing wired sensors …… 22
-
23


Programming security team phone numbers ……. 24


Connecting your GSM dialer …………………………… 25


Hardware …………………………………………..……… 26
-
27

Monitoring Einstein from your phone …………..…………… 28

Operations:


Einstein Quick Start ……………………………………..… 29


Remote control ………………………………..…………… 30


LCD display ………………………………………….………… 31


System parameters ……………………………..………… 32

Customization:


Arm/disarm delays …………………………………..……… 33


Bypass sensors …………………….…………………..……… 33


Compound siren …………….………………………..……… 34


Alarm mode …………………..………………………..……… 34


Set date/time ……………..….………………………..……… 34


Change password …………….………………….…..……… 35


Arm/disarm password protection …………….…..… 36


Siren sounding time …………….…………………..……… 36


Host ID/Neighbor ID …………….…………..……..……… 36


Set rings before Einstein picks up …………….……… 37


Automatic Arm/Disarm time …………….……….…… 37


Pre
-
recorded message …………….……………...……… 37


Chime feature …………….…………………………..……… 38


Telephone line anti
-
cutting function ………….…… 38


Return default settings …………….……………..……… 38


Power down …………….……………………………..……… 39


Alarm history record …………….………….……..……… 39


Ademco

…………….…………………..………………..……… 40

Frequently asked Questions …………….……………….…… 41
-
42

Introduction




Thank you for entrusting the most intelligent, yet user friendly security system available to protect your family
& property. The Einstein system is ahead of the industry, able to handle 32 wireless sensors and alarms as
well as 8 wired sensors. The built in phone dialer will place up to six phone calls for you in the event of an
emergency, moving onto the next number if there is no answer or it reaches an answering machine. Sensors
can be placed on time delay, instantaneous sounding, or a combination of the two, as far as 400 feet away,
allowing a single system to also protect barns or garages. Also, in the event of a fire or gas leak, the unit will
sound the alarm whether it is in armed mode or not.


Not only have you chosen the best system, you’ve also chosen the best company. Every device we sell
undergoes our
SmartInstall

regime where it is personally checked to ensure proper function and then pre
-
programmed before shipping to save you hours, headaches, and problems. All you need to do is follow the
easy setup procedure, enter your phone number, warning messages, new passwords, and preferences. If you
have any problems along the way, our customer service returns calls in less than 24 hours and can be reached
at (253) 468
-
0196 or
mhofeditz@hotmail.com
. Finally, all our systems also come with a full 3 year warranty
covering all parts and labor (exception: batteries), the BEST in the industry.


We believe you’ve made the best decision in home security. Thank you again for your business and the
opportunity to serve you.



1

User notice


Please read instruction manual carefully before attempting to operate the system.




Einstein’s battery will have the longest life if left plugged in at all times. Repeated fluctuations in voltage can
damage the battery as well as the electrical components as Einstein, which may lead to permanent damage of
the system.


To fully protect your home, office, and loved ones, and get the most out of your Einstein system, consider
using a combination of all types of sensors/detectors offered (door/window, motion, gas, smoke, etc).


The self malfunction checking system is an easy way to ensure the system is properly working. It is advised to
check the system as well as smoke and gas detectors weekly to ensure efficient functioning.


If the system does not have 220 AV/DC power, the outside sirens and the built in siren will only work for a
short time, if at all.


If, for some reason, you need to dismantle the panel (ex: to connect wired sensors), NEVER touch the
receiving module or you may cause permanent damage to your Einstein system.


NEVER attempt to dismantle the Einstein unit for maintenance. If you’re having difficulty, please contact our
customer service for advice on how to proceed. They can typically walk you through problems or give you
instructions on returning the unit for maintenance.



2

System summary


Sleek, compact design, attractive orange backlighting, and large LCD screen display for easy reading

Voice instruction allows easy operations

Tamper resistant, sounding if main panel is tampered with or if phone line is cut

Back up rechargeable lithium batteries last up to 72 hours in the event of a power outage

Low power alert function notifies you when backup sensor batteries are low

Protects up to 40 zones (32 wireless, 8 wired)

Double zone technology allows more than 1 sensor per zone

Ability to call up to 6 numbers in the event of an emergency

Sensors are learned into the system, allowing ease of adding to system as well as the ability to monitor history

Can be set to sound from 1
-
30 minutes

Programmable time delay to arm (0
-
99 seconds) allows you time to leave before system sets

Programmable time to alarm (0
-
99 seconds) allows you time to enter and disarm before system sounds

Remote control arm/disarm and panic

Mute siren function allows strobe siren with silent alarm

Listen in function allows you to monitor your house and system from anywhere you have phone service

Emergency help signal real
-
time check function

Logs last 100 system events, giving you a history of which contacts were broken and when

AC/DC power auto switch function

Optional: record and store a 10 second voice message

Optional: can work with
Ademco

monitoring center

Optional: self
-
check function automatically verifies all sensors are properly working every 12 hours

Optional: system can be set to automatically arm/disarm at up to 3 different time intervals per day


3

Main components


























Central Panel:
Brains of the Einstein system

This 5
th

generation control device can be hidden anywhere
inside your home or office where a thief will never find it. It
can then wirelessly detect all sensors and respond to
messages you send it by phone, auxiliary keypad, or
keyfob

switch within 250 feet. This workhorse continues to monitor
despite power outages or cut phone lines. Includes an 85db
horn.



Auxiliary Keypad:

Accessibility

These inexpensive auxiliary wireless keypads are placed next
to each door you wish to enter or leave as you arm or
disarm the system, allowing access to the system if you know
the password while serving as a filter for intruders. The
central panel is the real brain of the system, so damaging
this auxiliary keypad will simply sound the alarm and begin
notification of everyone on your call list. Even with
destroyed auxiliary keypads, your Einstein home security
system will continue to scare away intruders and protect
your property

4

Main components


























Keyfob

remote controller:
Portability

This handy unit allows you arm/disarm the system within
250 feet of the central panel (even through walls). This
allows you to arm/disarm the system with the push of a
button, eliminating the need for system delays. You can also
control the dialer, letting you use the system as an
emergency alert in the case of health difficulty or fire.
CAUTION: If a burglar gets his hands on this, he can gain
access to your home. Be careful not to leave it where it can
be stolen!


Wireless door & window sensors:
Functionality

The most common mode of entry by burglars is through
doors, with windows being a close second! These sensors
keep intruders from opening any sliding door or window.
The invisible magnet catch inside the switch signals the main
control unit when a separation of 1.5cm occurs. These
special sensors can be placed on your safe, gun cabinet,
liquor cabinet, office filing cabinets, jewelry boxes, or
anything else you wish to secure and control access of.

5

Main components

























Motion sensor:
Peace of mind

Motion sensors can detect if something is moving inside your
home. Einstein's state of the art PIR dual beam technology allows
your system to distinguish between a dog and a human. The
horizontal beam also helps to prevent false alarms, which are
common with motion detectors sold with less intelligent systems.



GSM cellular
-
dialer:
Flexibility

No landline? No problem! The cellular
-
dialer receives its wireless
instructions from the central panel, then uses its own removable
cell phone chip to contact the up to 6 numbers on your home
security team. This can include neighbors, family members, or
even a private security company of your choice. We don’t
recommend that the first contact be the police, as most
communities give low priority to automatic alarm calls and often
send a bill if there is no sign of a break
-
in. Instead, we
recommend calling you or someone you trust who can quickly
evaluate the danger by listening in and then place a personal call
to the authorities, if needed, to which they will actually respond in
a timely manner.

6

Main components


























Auxiliary horn:
Turn it up!

While noise may not be your friends, it’s the deadly enemy of a
burglar. Ask any law officer the best way to thwart intruders and
they’ll tell you a loud alarm at the instant your home is violated.
If you need extra sound power near the control center, the
auxiliary horn draws its power directly from the central panel.
With its 140 dB output, you can count on it to drive would be
intruders away. FYI: 120 dB is the sound of a rock concert up
close (loud enough to hurt your ears). 130 dB is 10xs that, 140 dB
is 10xs that again. We’re talking serious sound output.


Outdoor siren and strobe:
Attention drawing

This is your primary deterrent against burglary. Rainproof, cold
-
proof, and attractive with its blue strobe light flashing every 5
seconds. You do NOT want this inside your house. It’s 160 dB
-

as loud as a gunshot. Mount it high on an outside wall where it
will attract attention and warn anyone outside which entry has
been violated. When a siren like this sounds, a burglar can’t
think, he can’t take his time, he just wants to run and get out of
there! Also contains 72 hour back up battery in case of power
outage.

7

Main components


























Outdoor Mega Siren:
Blast it!

This is the loudest horn accessory available. It contains 2
horns, which work together for 180 dB output. Like the rest of
the horns, it connects wirelessly to the Einstein unit up to 150
feet away. It also contains a bright strobe that fires every 2
seconds while the alarm is sounding. A flashing green LED
tells you the alarm is armed and ready. It also contains a
tamper protection switch which will cause the alarm to sound
if a burglar tries to disable the alarm before breaking in.


Glass break sensor:
True genius

Breaking a window pane is not a big deal to a burglar, trained
by the old
-
technology alarms that rely on window switches. If
your house is equipped with one of these glass break sensors
on each bank of windows, an intruder is in for a big surprise!
Breaking glass has a unique frequency and sharpness of sound.
Whenever these wireless, battery operated sensors detect that
audio ‘fingerprint’, it will signal the Einstein’s central panel to
sound the alarm and scare the burglar away. It won’t be fooled
by thunder, airplanes, keys, or barking. Only glass breakage in
the room where the sensor sits will trigger this sensor.

8

Main components
























Smoke detector:
Looks can be deceiving

While this looks like the cheap smoke alarms that drive you
crazy when you burn bacon, think again. This wireless unit has
advanced sensors that only detect true smoke and fire
particulates. The detector then communicates with your
Einstein security system, sounding the alarm to wake up your
family and calling your list of numbers so you can call the
authorities. The smoke detector protects your house regardless
of whether the system is set or not. Mount them near where
you sleep and in family living areas, not near the kitchen.



Gas sensor:
Beyond visibility

Carbon monoxide will poison you. Natural gas can explode.
This sensor will sound the alarm wirelessly if it detects ANY
combustible or undesirable gas in your home. Set one in the
kitchen if you use natural gas, another in the bedrooms or
utility room where carbon monoxide can gather.

9

Installation

The Einstein Main Panel installation






















Finding a location for your Einstein central panel:


#1: If mainly using remote controls to arm/disarm, place the Einstein central panel anywhere out of
the way, even in a closet


#2: If mainly using the central panel and password to arm/disarm the system, it may be more
convenient to place it somewhere that it’s easily accessible

10

Installation

The Back of the Einstein























Back up battery will
operate system for
72 hours in the
event of power
outage

Connections for 8
hard wired sensors
(optional, as system
already supports 32
wireless sensors)

11

Installation

The Back of the Einstein main panel























From left to right:

1: line out to telephone (optional)

2: Power connection

3: Auxiliary horn

4: Phone line in from wall

I.
Connect the power adapter to the Einstein central panel. You will hear one short CHIRP and the LED
screen will illuminate.

II.
Insert the auxiliary siren into the siren jack

III.
If your Einstein system will be connected to a land line, connect the phone line to the line port (far right)

IV.
If you want to connect a telephone to the same phone jack, plug the line from the phone into the phone
port

12

Installation

Programming sensors






















Congratulations!


Your
Einstein system includes the
added value of all
sensors and
accessories coming
pre
-
programmed
from the manufacturer!

You’ve
saved yourself HOURS in
installation time. The following
programming instructions are FYI
only.


Please
skip to
the Programming phone
numbers section for
the next step in
your installation process.


13

Programming

Sensors
























00: Water sensor

01: Emergency (here, it means panic button from the remote control)

02: PIR (motion detector)

03: Door/window sensor

04: Glass break

05: Gas sensor

06: Smoke detector

07: Temperature detector

14

Programming

wireless window/door

Sensors









Figure 1 Figure 2



Figure 3













1.
Press the
Sensor

button on the Einstein, enter password (1234), followed by #

2.
0
-------
7 will appear on LCD (Figure 2); press 3 to begin programming door/window sensors

3.
Now enter the 2 digit zone number (02
-
32); FYI: 01 is reserved for the PANIC button

4.
Press # to confirm

5.
You will see a series of dashes followed by the zone number (ex:
-----------------
02)

6.
With the battery in the door/window sensor, activate it by pulling the 2 pieces apart

7.
The sensor will send a signal to the Einstein once activated, automatically learning it

8.
Make sure the next contact you learn is one zone number higher (ex: 03)

9.
MAKE SURE YOU WRITE DOWN WHICH ZONE NUMBER GOES TO WHICH ENTRY (EX: ZONE 02:
FRONT DOOR, ZONE 03: BACK DOOR)

10.
To delete a sensor, SENSOR, password, #, 8, use 2 or 8 to scroll to the sensor, press backspace and #
simultaneously (multiple times if needed), then #, QUICKEXIT; if successful, when scrolling back through
sensors LCD will appear as Figure 3, indicating no sensor is programmed in that spot

15

Programming

wireless Glass Break sensors




BLOW HERE



















1.
Press the
Sensor

button on the Einstein and enter password (1234) followed by #

2.
0
-------
7 will appear on LED

3.
Press 4 to begin programming glass break sensors

4.
Now enter the 2 digit zone number (02
-
32) you want to assign and press # to confirm

5.
You will see a series of dashes followed by the zone number (ex:
-----------------
05)

6.
With the glass break sensor plugged in, activate it by blowing into the front of the sensor

7.
The green & red LED lights on the sensor should light up and send a signal to the Einstein, which will
CHIRP, indicating the glass break sensor has been programmed to the zone number you chose

8.
Make sure the next sensor you learn is one zone number higher (ex: 09)

9.
MAKE SURE YOU WRITE DOWN WHICH ZONE NUMBER GOES TO WHICH SENSOR (EX: SENSOR 05:
Glass break dining room, SENSOR 06: Glass break kitchen)

10.
Make sure each sensor has its own zone; never put 2 sensors on one zone, even if located in the same
room

16

Programming

wireless smoke sensors






















1.
Press the
Sensor

button on the Einstein and enter password (1234) followed by #

2.
0
-------
7 will appear on LED

3.
Press 6 to begin programming smoke sensors

4.
Now enter the 2 digit zone number (02
-
32) you want to assign, press # to confirm

5.
You will see a series of dashes followed by the zone number (ex:
-----------------
08)

6.
With the battery in the smoke sensor, activate it by pressing the clear test button on the top

7.
The sensor will CHIRP and then send a signal to the Einstein, which will also CHIRP to indicate that
the sensor has been programmed

8.
Make sure the next sensor you learn is one zone number higher (ex: 09)

9.
MAKE SURE YOU WRITE DOWN WHICH ZONE NUMBER GOES TO WHICH SENSOR (EX:
SENSOR 08: SMOKE MASTER BEDROOM, SENSOR 09: SMOKE GUEST BEDROOM)

10.
Do this for all sensors

17

Programming

wireless motion sensors






















1.
Press the
Sensor

button on the Einstein and enter password (1234) followed by #

2.
0
-------
7 will appear on LED

3.
Press 2 to begin programming motion sensors

4.
Now enter the 2 digit zone number (02
-
33) you want to assign, press # to confirm

5.
You will see a series of dashes followed by the zone number (ex:
-----------------
15)

6.
With the batteries in the motion sensor, plug in the power cord inside the sensor to activate it

7.
The red LED light on the motion sensor will flash and then send a signal to the Einstein, which will
CHIRP to indicate that the sensor has been programmed

8.
Make sure the next sensor you learn is one zone number higher (ex: 16)

9.
MAKE SURE YOU WRITE DOWN WHICH ZONE NUMBER GOES TO WHICH SENSOR (EX:
SENSOR 15: Motion, Living Room, SENSOR 16: Motion, Entryway)

10.
Do this for all sensors

IMPORTANT:

1: Always program motion sensors last

2: Make sure the power cords inside previously programmed motion
sensors are unplugged before programming new motion
sensors to prevent setting off previously programmed
motion sensors and confusing the system

18

Programming

wireless horns






















1.
Press the
Sensor

button on the Einstein, enter password (1234) followed by #

2.
0
-------
7 will appear on LED

3.
Press *, the LED will display a dash
--
, then enter 03 to begin programming wireless horns

4.
You will see a few numbers displayed on the LED, press backspace and numbers will clear

5.
Type in 02000000, then hit # to confirm, followed by the quick exit button in bottom left of panel

6.
The horns have been learned to the system; no CHIRPING or flashing will confirm this

7.
This programs all horns that you’ve purchased for your system

19

Programming

gas sensor






















1.
Press the
Sensor

button on the Einstein and enter password (1234) followed by #

2.
0
-------
7 will appear on LED

3.
Press 5 to begin programming gas sensors

4.
Now enter the 2 digit zone number (02
-
33) you want to assign, press # to confirm

5.
You will see a series of dashes followed by the zone number (ex:
-----------------
15)

6.
With the gas sensor plugged in, hit the black test button on the side of the gas sensor to activate it

7.
The gas sensor will CHIRP and then send a signal to the Einstein, which will also CHIRP to indicate
that the sensor has been programmed

8.
Make sure the next sensor you learn is one zone number higher (ex: 16)

9.
MAKE SURE YOU WRITE DOWN WHICH ZONE NUMBER GOES TO WHICH SENSOR (EX:
SENSOR 15: Motion, Living Room, SENSOR 16: Motion, Entryway)

10.
Do this for all sensors

20

Programming

Extra Key fob Remotes






















1.
Press the
Sensor

button on the Einstein and enter your password (1234) followed by the # key

2.
0
-------
7 will appear on LED

3.
Press 1, the LED will display a dash
--
, then enter 01# to begin programming extra
keyfob

remotes

4.
Now press any button on the new remote, the Einstein will chirp

5.
Hit the quick exit button on Einstein (bottom left) and the new remote has been learned

If a remote is lost, you need to delete out all the remotes and then reprogram the ones you have (and
new ones you purchase) following the above instructions.

To delete remotes: press SENSOR, password (1234), #, *, 01, #, password (1234), #,
Quickexit

21

Programming

pre
-
existing wired sensors in home






















22

Programming

Wired sensors (not normally used)









Figure 1














1.
Connect the wired sensors according to the diagram on the previous page

2.
Press SENSOR, password, #, 9 (to check the modes of the 8 wired sensor zones), scroll up (2) and
down (8) to the sensor of choice (Figure 1)

3.
Press 4 and MODE to choose the mode for the wired sensor (Emergency help: 24 hour alarm
whether system in arm/disarm, Arm: system will siren if armed and sensor is triggered, Bypass:
alarm will not siren if in bypass mode and that sensor is triggered, Disarm: Einstein will not siren if
armed and sensor is triggered, Time delay: Einstein will siren if armed and sensor is triggered after
the programmed delay)



23

Programming

Security team phone numbers











FIGURE 1



FIGURE 2


1.
Press 3, followed by your password (1234), then the # key; the LED screen will read 1
--
NO
--

(FIGURE 1)

2.
Press the backspace key & the # key simultaneously (you may need to push them together multiple times)
until the

NO


disappears and the screen reads 1 with a flashing dash mark(FIGURE 2)

3.
Enter your phone number (with area code, if necessary), then hit the # button

4.
The LED screen will read 1: (xxx) xxx
-
xxxx

5.
To enter a second number, press 2.

6.
The screen will read 2
--
NO
--
; repeat the process (pressing down backspace and # simultaneously)

7.
The system can hold up to 6 phone numbers

8.
NOTE: If you decide to have the system professionally monitored, make sure these numbers are in spots 1
or 2

9.
TO DELETE A NUMBER: 3, password, #, scroll to the phone number you want to delete, press
BACKSPACE & # simultaneously (may need to press multiple times until number is deleted), #

24

Installation

Connecting your GSM Dialer






















1.
If using a GSM dialer instead of a landline:

2.
Open the compartment on the back of the dialer, insert your SIM card, and close the latch

3.
Attach the antenna to the top of the GSM dialer and screw it on until secure

4.
Plug the power cord into the top of the dialer and ensure the power switch is turned to on

5.
The red power light on the front will illuminate and the system will begin searching for a signal

6.
Plug one end of the phone cord into the phone outlet labeled 1 on top of the dialer (next to power)

7.
Plug the other end of the phone cord into the LINE port on the back of the Einstein (far right)

8.
Your Einstein is now set up to use the GSM dialer to call out when triggered, using the numbers
you previously programmed

25

Installation

Hardware


DOOR/WINDOW SENSOR: This sensor consists of 2 pieces (a larger transmitter portion and a smaller
magnet portion). When installing door/window sensors, make sure the magnet is on the side of the
transmitter with the 2 LED lights. If it’s on the other side (away from LED lights), it won’t function. These
can be used on doors, windows, and cabinets. When the magnet is separated from the transmitter by 1.5cm
or more, it sends a signal to the Einstein to sound the siren and begin dialing. While the Einstein can read
signals up to 400ft away, interfering objects and walls will reduce this. To install, separate the magnet and
transmitter, peel the backing off the tape and stick in place.


MOTION SENSOR: NEVER install more than 2 motion sensors in the same room/area as this can lead to false
alarms. Also, avoid areas near vent airflow, with curtains that could move, or near fans as this can also lead to
false alarms. To install, first unscrew bottom screw from motion sensor, then unscrew middle screw from
green motherboard inside the sensor & gently pull the motherboard away from the back panel. You’ll see a
screw sized hole in the back; use the hole to attach the motion and mount together with the screw that is
already in the mounting hardware. To adjust for pets, mount it higher up so the motion doesn’t cover as
much of the floor. You can also adjust the sensitivity on the motion’s motherboard (4
-
8, 5
-
12, 9
-
18 meters)
via the black jumper switch.


SMOKE DETECTOR: We recommend placing one smoke detector in every room of the house, in a central
location, no closer than 2 feet from the corner. To install, unscrew the mounting plate from the back of the
smoke sensor. Use 2 screws to secure the mount to the ceiling. Screw the smoke detector onto the mount.


GAS SENSOR: To install, place one screw in a secure location. Hang sensor on the screw and plug into 110V.

26

Installation

Hardware


WE RECOMMEND TESTING SMOKE & GAS SENSORS (by pressing the button on the sensor) ONCE PER
WEEK TO ENSURE EFFICIENCY. The gas sensor (while plugged in) can also be held under a car’s exhaust
and should sound the alarm due to the CO2 (NOTE: it takes about 3 minutes from plug in for alarm to
initialize and prepare to sound).

CAUTION: DO NOT install gas sensor outdoors, near air vents, air intakes, or exhaust fans, in areas of high
humidity. Do not use heavy amounts of spray glue, adhesives, pesticides, or diluents (ex: rubbing alcohol)
near the sensor to avoid damaging sensor components.

Install unit in a location giving it a clear path to the gas source while staying further than 4 feet from source














27

Monitoring

Controlling Einstein from your phone


Once you’ve programmed the numbers into the Einstein and connected the system to a land line or GSM dialer,
you can test the system to check its ability to call out when triggered.

To mute the system (so it doesn’t hurt your ears while you’re testing):

Hit the SET button, password (1234), #, 4, backspace, 00, #, QUICKEXIT

You’ve now turned the sirens off so you can test the system without the noise.

Now, hit the panic button on the remote control (bell key, top left)

The LED will display the first number you’ve programmed it to call.

The phone will begin ringing and the Einstein will play your 10 second pre
-
recorded message


To control Einstein from your phone:

1.
Press 1 to turn off sirens and listen into your home

2.
Press 2 to start the sirens

3.
Press 3 to stop the sirens

4.
Press 4 to arm the system

5.
Press 5 to disarm the system

6.
IMPORTANT: Always press # to stop the system from calling subsequent phone numbers.
Einstein will keep
calling numbers until someone hits #. If you simply hang up, it WILL keep calling. This safety feature
prevents the system from being fooled by answering machines. DON’T FORGET!


To UNMUTE the system, now press SET, password (1234), #, 4, backspace, 01
-
09 (how many minutes you want
the sirens to go off when triggered; 01= 1 minute), #, QUICKEXIT

28

Operations

Quick start:















Arm mode:
When you want to activate the system, on the main panel press
Quick Exit + *
, then enter your
password
. (default: 1234#). Once armed, the red armed light on the front of the Einstein will turn solid.

Disarm mode:
To deactivate the system, press
Set + 1
on the main panel, then enter
password
. When
disarmed, the red armed light on the front of the Einstein will flash. Window sensors will not set off the
alarm (exception: CHIME mode ON), but smoke/gas sensors will continue to function.

Bypass mode
: Arms the system without the motion detectors or any other sensors set to bypass mode (stay
at home mode). On the main panel, press
Backspace + 7
, then enter your
password

.

Panic button:

To immediately sound the system, on the main panel press
Sensor + 4
, then enter
password
.

29

Operations

Keyfob

Remote:
















Arm system:
Lock button, top right

Disarm system
: Unlock button, bottom right

Bypass mode
: Lightening bolt, bottom left (Arms the system without the motion detectors)

Panic button:

Bell button, top left




30

Operations

LCD display:

























EMC/RT: 24 hour zone, monitored whether system is armed or
disarmed (all smoke/gas detectors; can also change specific
sensors to 24 hour zone (ex: gun cabinet)

PIR: Motion detector

Alarm
Telep
: appears next to number being dialed when alarm
is tripped

Smoke: smoke detector

Door sensor: door/window sensor

AID: glass break detector

Ring times: # times you want the phone to ring before the
system picks up, allowing you to monitor from your phone

Timing: displayed when setting specific times for system
arm/disarm

Gas: gas detector

Delay: arm delay
-
> # seconds once system is armed for you to
leave the house; arm
telep

delay
-
> # seconds once home is
entered to disarm system

Arm: system is armed

Disarm: system is disarmed

History: stores the past 100 logged events, the time & what
occurred (system arm/disarm, contact broke, motion trigger)

: Einstein is armed and will activate sirens

:: Compound siren ON; Einstein will beep if a key is pressed


31

Operations

System Parameters:





Standard frequency of double audio frequency: low frequency group 697,770,852,941 Hz; high frequency
group 1209. 1336,1477,1633 Hz; frequency deflection:

1.5%


Electronic lever: low frequency group 9dbm, 3dbm, high frequency group 701dbm, 3dbm


Time delay to arm: “0
-
99” seconds (you can set yourself)


Siren sounding time: “1
-
30” minutes (you can set yourself; anything more than 30 minutes will cause siren to
sound constantly)


Standby current: <25mA DC 9V


Working current: <200mA


Environmental condition: Temperature range:
-
10

C
--
> 45

C (14

F
-

113

F)
; Humidity:

95%


Power supply: 9V, 300mA


32

Customization

Einstein YOUR way







Figure 1

Setting arm/disarm delays
:

1: ARM DELAY: seconds you want the system to wait between being armed and actively monitoring, allowing you
time to exit the building if arming system from keypad; SET, password (1234), #, 8, LED will read 00, hit backspace
and enter 01
-
99 (seconds of arm delay you’d like; Figure 1), #

2: DISARM DELAY: seconds you want the system to wait after contact is broken before sounding sirens (giving you
time to enter the building and turn off the system from the keypad)

Once you’ve pressed # to program the ARM DELAY (above), press 2 to display the ARM TEL DELAY (LED reads
00), backspace, enter 01
-
99 (seconds of disarm delay you’d like), #, QUICKEXIT

3: Assign delay to sensors; SENSOR, password (1234), #, LED reads 0
----------
7, press 8, this takes you to the scroll
sensors screen & starts you with the first sensor (ex: 02), press 6 (MODE) until the sensor number says DELAY
next to it. Hit 2 to scroll to the next sensor (ex: 03), press 6 until the sensor reads DELAY next to it, QUICKEXIT.



NOTE: If having issues with blaster siren signal interference, you MUST assign a delay to ALL sensors you want the
blaster siren to sound for, assigning at least a 4 second delay.


BYPASS sensors
: allows a sensor to not be armed when system is activated in bypass mode

Press SENSOR, password (1234), #, 8, use 2 (up) or 8 (down) to scroll to sensor, MODE (multiple times until it says
bypass/arm in the display next to the sensor number), QUICKEXIT; NOTE: all motions are pre
-
set to bypass mode

33

Customization

Einstein your way


COMPOUND SIREN OFF:

prevents system from CHIRPING when armed or disarmed; press SET, password, #,
2 (opens compound siren setup interface; LCD will display A
-
P), press 8 (cycles between on/off), CONFIRM
returns you to system menu. If compound siren is on, LCD will display:


ALARM MODE FOR WIRELESS SENSORS:

Allows you to program a regular sensor to 24 hour emergency
status (similar to the smoke or gas sensors), so that it will sound whether the system is armed or disarmed
(ex: gun safe, liquor cabinet). SENSOR, password, #, 8, scroll to the sensor (use 2 for up, 8 for down; see FIG
1), press MODE until your desired status appears (EMC/RT: 24 hour status whether armed or disarmed, ARM:
default option only sounding when system armed, Arm Bypass: will not sound if system set in bypass mode,
Disarm: if system is armed and sensor will not sound sirens if tripped, Delay: sensor will delay the # seconds
you’ve selected


SETTING DATE AND TIME:
SET, password, #, LCD should read as figure 2, 0, LCD will flash (Figure 3),
enter year, system will automatically switch to month/day setting (Figure 4), input month/day and system will
automatically switch to time setting (24 hour mode; Figure 5), after inputting time system automatically
becomes active and switches back to main system menu








Figure 1 Figure 2 Figure 3 Figure 4 Figure 5

34

Customization

Einstein your way










Figure 1 Figure 2


CHANGE PASSWORD:

The Einstein comes to you with the password: 1234

If you must change it, WRITE IT DOWN!

IMPORTANT
: If you lose your password, there is NO WAY to recover it or regain access to the system!!!

When system is ready for the password, the LED will display as above with the dash on the right blinking

Enter the password (ex: 1234) followed by # to gain access to the system controls

When finished, press QUICKEXIT to get back to the Einstein’s main menu

To change the password:

SET, password (1234), # (LCD shows figure 1), 5, (existing password will show on LCD, Figure 2), backspace,
type new 4 digit password, #, QUICKEXIT


The system can hold up to 7 passwords. All will arm/disarm the system. Only the first password will allow
you to change any system settings.

35

Customization

Einstein your way









Figure 1



Figure 2 Figure 3


ARM/DISARM PASSWORD PROTECTION:
Determines whether or not a password is needed to arm/disarm
system when calling in from a phone. To turn password protection on/off: SET, password, #, 3, Figure 1 will
appear on LCD and flash, press 2 or 8 to turn it on/off, then press CONFIRM to return to main menu


SET LENGTH OF SIREN SOUNDING:
Determines the length of time the siren sounds once activated. To
customize, SET, password, #, 4 (LCD will appear as Figure 2), BACKSPACE, then enter your desired length of
time (00


09 minutes), CONFIRM. Will appear on the main LCD screen, indicating a siren will sound
when armed and activated.

NOTE: 00 = muted siren, siren WILL NOT sound when system is armed and a sensor is tripped


SET HOST ID/NEIGHBOR ID:
The alarm host ID is used to connect with a monitoring center and depends
on your personally assigned ID card from the monitoring company. To enter the ID: SET, password, #, 6,
LCD will display ID (Figure 3), press backspace to clear the current ID, then enter your new ID, CONFIRM

NOTE: 1 = host ID #; 2= neighbor ID#


36

Customization

Einstein your way









Figure 1



Figure 2 Figure 3

SET NUMBER OF RINGS BEFORE SYSTEM PICKS UP:

This option controls the number of times the phone
will ring before the system picks up, allowing you access from a remote location (ex: cellular phone). SET,
password, #, 7 (LCD will display as Figure 1, showing the number of rings before pick up), press BACKSPACE,
then enter your desired number of rings (0
-
9), CONFIRM

NOTE: 0 = system is not controllable via phone


SET ARM/DISARM TIME:
Allows you to program up to 3 groups of times every day that the system will
automatically arm or disarm. SET, password, #, 9 (LCD displays Figure 2). 1 indicates the group # (each
group number hold an arm and a disarm time), OFF indicates no setting. Press ‘4’, and LCD switches to
Figure 3. Press BACKSPACE, then input desired time (24 hour mode), press CONFIRM


PRE
-
RECORDED MESSAGE:

Changes the personal message Einstein plays when calling your security team.
Press 3, password (1234), #, the LED will count down,
-
3,
-
2,
-
1, 0… At 0, start recording your 10 second
message. Einstein will count up to 10 and then your message will be saved. (EX: This is the Johnson
residence. A break
-
in may be in progress. Press 1 to listen in, 4 to re
-
arm the system, and # when finished to
stop the dialing before hanging up.) Press 7 to listen to your message. If you’re happy, you’re done. If you’re
not happy, press 6 to re
-
record.

37

Customization

Einstein your way









Figure 1 Figure 2 Figure 3

CHIME feature
: if enabled, Einstein beeps when disarmed and a door/window sensor is activated

To enable: Press SET, password (1234), #, *


LED will display 01 at the top; use up (2) & down (8) to scroll to 16


While LED display reads 16, hit BACKSPACE, LED will read ALARM TEL on the left


Press 2 to change OFF to ON, # to confirm, then QUICKEXIT twice

To disable, follow the above directions, switching it to read OFF instead of ON


TELEPHONE LINE ANTI
-
CUTTING FUNCTION:

When enabled, Einstein will automatically siren if the
telephone line connected to the system is cut or disconnected. SET, password, #, 1 to open the anti
-
cut
interface which will flash (Figure 1), press 2 or 8 to scroll between on and off, CONFIRM


RETURN DEFAULT SETTINGS:
Returns system to default settings. BACKSPACE, password, #, LCD will read
as Figure 2, press 1 and LCD will switch to figure 3 and flash, CONFIRM, password, #, system will beep twice if
password is correct, then panel will reset. Default parameters: password protection, soundless alarm, &
remote controller compound siren are open, siren time is 60 seconds, system picks up after 6 rings, time
delay to arm & alarm is 0, cleans off all 6 groups, fixed time arm & disarm function is closed

38

Customization

Einstein your way







Figure 1 Figure 2 Figure 3 Figure 4 Figure 5


POWERING DOWN THE SYSTEM:

To turn the system completely off, BACKSPACE, password, #, LCD will
read as Figure 1, 2, LCD will switch to Figure 2 and flash (indicating OFF), CONFIRM, password (if correct
password, system will power down)


ALARM HISTORY RECORD:
The Einstein logs the last 100 events that have occurred with the system. To
check, press HISTORY, password, #, LCD reads as Figure 3 with the number indicating the number of history
records the system currently has available to view (if more than 100, system automatically deletes oldest and
replaces with new), press 2 (up) or 8 (down) to scroll through the history

Figure 4 shows an example indicating a PIR (motion detector) in the 22
nd

defense zone was triggered at 13:45
on 11
-
28 (Nov 28), and is recorded as log #63

NOTE: If you confirm the alarm via phone, the defense zone will be the phone number’s zone. EX: FIGURE 5;
If you confirm the alarm via the first programmed phone number, history log shows on Oct 11 @ 03:01, first
telephone is armed, record #12


CLEARING HISTORY RECORD:
HISTORY, password, #, BACKSPACE, password, CONFIRM


39

Customization

Einstein YOUR way









Figure 1


ADEMCO:
To program for use with a monitoring company

SET, password, #, * (opens
Ademco

function settings, Figure 1), press 2 (up) or 8 (down) to choose functions

01
: Set time delay to inform arm & disarm; BACKSPACE, enter 0
-
15 seconds, CONFIRM

04:
Telephone number for
Ademco

monitoring center (holds 2 numbers), BACKSPACE, enter phone #, CONFIRM

05:
Inform arm/disarm, BACKSPACE, 2 or 8 to change on/off, CONFIRM

06:
Set call times (max 15), BACKSPACE, enter # call times (0
-
15), CONFIRM

07:
Neighbor’s call system helps call to alarm; BACKSPACE, 2 or 8 to change on/off, CONFIRM

08:
Sound alarm, BACKSPACE, 2 or 8 to change on/off, CONFIRM

09:
Display alarm telephone number, BACKSPACE, 2 or 8 to change on/off, CONFIRM

10:
Voice instruction for time delay to arm & alarm, BACKSPACE, 2 or 8 to change on/off, CONFIRM

12:
Recycling self check, BACKSPACE, 2 or 8 to change on/off, CONFIRM

13:
Alarm for low power & accessory anti
-
tampering, BACKSPACE, 2 or 8 to change on/off, CONFIRM

15:
Inform AC power off, BACKSPACE, 2 or 8 to change on/off, CONFIRM

Finally, press QUICKEXIT to confirm & exit

40

FAQ

Frequently asked questions:


Auto dialer not functioning:
Make sure Einstein is armed, ensure security team phone numbers are
programmed into the main unit, try adjusting the distance between the sensors and the main Einstein unit (if
distance or interference is too great, system cannot communicate), make sure the ID code matches between
the sensors and the Einstein, try cutting off the power supply to Einstein then reconnecting it and searching
the GSM network (sometimes the GSM signal is bad), ensure the SIM card is current and contains minutes


Einstein won’t arm or disarm:

䑩D慲m⁴桥 sys瑥m, 瑨t渠瑲y re
-
慲m楮朠i琠⡩(⁴桥 sys瑥m 楳 慬re慤y 慲med⁡湤
y潵o慴瑥a灴⁴漠re
-
慲m⁩琬t湯瑨楮朠w楬氠桡灰h温n re慤 瑨t 潰or慴a潮s se捴楯c 潦o瑨t 潷湥r慮畡u⁴漠o湳畲e
灲潰pr 捯mm慮as 慲e 扥楮朠畳ed,⁩f 慴瑥a灴楮朠瑯t慲m/d楳慲m⁦r潭 瑨t 步k灡p m慫e⁳畲攠y潵oe湴nr 愠
灡psw潲o⁩f 灡psw潲o 灲潴散瑩潮t楳 潮


Blaster siren not sounding:
Sometimes problems occur with the blaster sirens due to interference between
incoming and outgoing signals at the Einstein central panel. This can be solved by applying a short arm &
disarm delay to all contacts. A delay of at 4 or more seconds has been shown to fix the blaster siren issues
caused by signal interference.


Door contact not working:
Check the lower LED light. If it’s red, the contact has a low battery. You’ll need a
12V, 23A standard battery that can be found MUCH cheaper online than at your local convenience or
electronic store. FYI: contacts on entries that are the most frequently utilized as well as contacts located
further away from Einstein will likely run out of battery faster than others.



41

FAQ

Frequently asked questions:


No voice message plays when I answer Einstein’s phone call
:†E湳畲e 瑨tre 楳 愠癯楣i ss慧a⁲e捯rded⁩渠
E楮獴e楮i⡣畳瑯(楺楮朠y潵爠sys瑥m)


The mot楯渠sens潲 is hav楮朠false al慲ms
: ⁔桥 m潴楯o se湳潲n楳 m慤e 瑯tde瑥捴⁍c呉低.†M慫e s畲攠瑨tre
aren’t any curtains that could be moving to set it off. Pets as well as mice/rats can cause false alarms;
consider repositioning the detector so it doesn’t cover all the way to the floor. Lastly, try shortening the
detecting area or turning down the sensitivity on the sensor.


The remote controllers aren’t working:

呲y 捨慮杩湧a瑨t 扡b瑥r楥献i⁉ 瑨tre 慰灥慲s 瑯t扥⁲畳琠潲od楲琠慲潵od
the battery connection, clean that off to ensure a good connection. If this doesn’t work, you may need to
relearn the remote controls to the Einstein unit. NOTE: This will clear out ALL remotes, necessitating ALL
remotes to be present when you relearn them to the system.


The sensors aren’t communicating with Einstein:

See if there is a disturbance that could be interrupting
communication. Make sure
Einstien’s

power cable is properly connected and try changing the battery in the
sensor. If this doesn’t work, there is a slight possibility the receiving module in the Einstein unit is
malfunctioning. Please contact us for a solution.


The siren won’t sound (silent)
: Make sure you haven’t muted the siren (customizing your system) and that
the system was armed before you attempted to set it off. This can also be caused by a short circuit of siren
pins or jack, a broken wire, or a bad connection. Please contact us for a solution.


42