Revision: 2012/09/19D DAESIN Electronics Co., Ltd.

klapdorothypondΚινητά – Ασύρματες Τεχνολογίες

23 Νοε 2013 (πριν από 3 χρόνια και 6 μήνες)

86 εμφανίσεις






Revision
: 2012/09/19D

DAESIN Electronics Co., Ltd.

Buttons


There are 4 buttons in TDS
-
1. In the following each
button’s function is described.


Button : Menu / Previous Menu / Esc


Button : Select / Save


Button : Up


Button : Down



While driving all the buttons are not functioning
except “S” button.


For setting or data backup, please park your car in a
safe place first and operate.


2

DAESIN Electronics Co., Ltd.

Screen Mode (4 types)


There are four screen modes in TDS
-
1 : start, driving, daily
statistics, and total statistics. Each time “S” button is
pressed, the screen will change to a different mode.



Start Screen Mode





1.
License Plate No.

2.
GPS Signal (* will blinking when normal condition)

3.
Driver No.

4.
Current Time

5.
BK: Break On status

6.
Engine RPM

3

DAESIN Electronics Co., Ltd.

Screen Mode (4 types)
(continued)


Driving Screen Mode (When the car is start moving, screen
will automatically changed to driving screen mode)





1.
Current Data & Time

2.
Communication Type


NN: No Wireless Communication


WF:
WiFi


BT: Bluetooth


MN: Mobile Network

3.
GPS Signal (* will blinking when normal condition)

4.
Current Speed

5.
Engine rpm


4

DAESIN Electronics Co., Ltd.

Screen Mode (4 types)
(continued)


Daily Statistics Screen Mode




1.
Daily Miles in KM

2.
Daily Driving Time in hours and minutes

3.
Error Code (if there
is any)


5

DAESIN Electronics Co., Ltd.

Screen Mode (4 types)
(continued)


Total Statistics Screen Mode




1.
Total Accrued Mileage in KM

2.
Accelerometer X & Y Values


(indicates current status of TDS
-
1. If installed not in equilibrium (0,
0 condition), it can be calibrated using settings menu)


6

DAESIN Electronics Co., Ltd.

Settings


In TDS
-
1, driver no, license plate no, and speed
coefficient (speed coefficient & rpm coefficient) can be
set.



Driver No Set up






1.
Press button for more than 2 seconds.

2.
Using and button, select (1 ~9) & press to save.


7

DAESIN Electronics Co., Ltd.

Settings
(continued)


License Plate No Set up








1.
In license plate no input mode, use and button to
enter license plate no.

2.
Press button to save.

8

DAESIN Electronics Co., Ltd.

Settings
(continued)


Coefficient Value Set up


1.
Select Speed Coefficient set
up from menu.

2.
Enter Speed Coefficient
value and press button to
move back.

3.
Select RPM Coefficient set
up.

4.
Enter RPM Coefficient
value and press button to
save.


9

DAESIN Electronics Co., Ltd.

Data Backup


Data backup of TDS
-
1 is fully automatic. When insert a
micro SD card to TDS
-
1, data backup will start.







1.
Insert a micro SD card to the side memory slot of TDS
-
1.

2.
Select “Automatic Backup” from the menu.

3.
TDS
-
1 will backup data from the last backup date till today.


Please DO NOT eject the memory card during the backup!

10

DAESIN Electronics Co., Ltd.