SCHOOL OF ENGINEERING COCHIN UNVERSITY OF SCIENCE AND TECHNOLOGY

fiercebunΗλεκτρονική - Συσκευές

2 Νοε 2013 (πριν από 3 χρόνια και 9 μήνες)

66 εμφανίσεις

SCHOOL OF ENGINEERING

COCHIN UNVERSITY OF SCIENCE AND TECHNOLOGY

DETAILED SPECIFICATION FOR PROCUREMENT PLANS


1.

Package No.
15



Procuring Department:
Electronics & Communications Engg.


Package Name:

EC/EE/ IT Digital /Microproc
essor
trainer kits and accessories

Sr.
No

Item Name

Specifications

Last date
of Bid
Invitation

Bid
opening
date

1

8051
Microcontroller

kit (EC)

8051 Trainer kit WITH LCD DISPLAY and IBM Key
board 8 BIT MICROCONTROLLER,
8031/51/89C51/52 SYSTEM CONFIGURED FOR
89C51/52 32KB EPROM/32 KB RAM 16 BIT
TIMER/COUNTER (8253); INTERNAL TIMER T0 AND
T1 FROM CPU 48 I/O LINES USING 2 NOS OF 8255
PPI CHIP TWO EXTERNAL INTERRUPTS INT0 AND
INT1
-

PS/2 COMPATIBLE KEYBOARD(IBM
COMPATIBLE)
-
16 X 2 LCD DISPLAY
-

BUS
-
50 pin FRC
(TTL COMPATIBLE)
-

ONE SERIAL UART INTERFACE
PROVIDED BY CPU
-

ONE SERIAL PORT THROUGH
8251
-

BATTERY BACK UP FOR THE RAM
-

POWER
SUPPLY (+5V/ 1 AMP &+/
-

12 V,250MA)

14
-
Aug
-
2012

16
-
Aug
-
2012

12 noon

2

8086
Microprocessor
Trainer Kit

8086 Microprocessor
Trainer kit with in
-

built Power
supply (8086 kit with in
-

built power supply: 16 x 2
LCD display, 101 ASCII keyboard, RAM and EPROM
minimum 64 KB(each) Features : Interface facility
with PC Timer/ counter (8253), serial interface,
minimum 48 I/O lines (
8255), interrupt controller
(8259), Input supply: 230V,1 Phase , 50 Hz Provision
for entering program in HEX OR ASSEMBLY
LANGUAGE using IBM Key board)

3

Digital IC
Tester

Digital IC Tester Key
-

pad and LCD display User
friendly Menu operated functions
Auto find to find
unknown ICs. Fail/ Pass Loop test Display the
function of "good"IC after test, on LCD DISPLAY
Technical specification Device Types: TTL, CMOS,
Microprocessor , RAMs , Peripheral interface ICs , 7
Segment Displyas etc Test Sockets: UNIVER
SAL 40
pin ZIF Packages Supported : DIP
6,8,10,14,16,18,20,24,28,40 pins Supply: 230V +/
-

10% , single phase 50 Hz

4

Digital IC
Trainer kit

Digtal IC Trainer kit (10 input switches , 10 logic
output indicators (LED), minimum 4 digit 7segment
display,

fixed clock frequency: 1 Hz, 10 Hz,100Hz,
1KHz, 10 KHz, &1 MHz. Monopulser (using push
button switch), solderless breadboard with atleast
1680 tie points, TTL compatible power supply, Two
nos of 20 PIN dip socket input and output signals
from/ to nic
kel plated spring type post, trainer
should be housed in strong cabinet with dust proof
cover.

The spring socket to provide multiple
connection facility)

5

Interface cards
for 8086

Interface card compatible with 8086
Microprocessor kit(item 3) ADC
INTERFACE DAC
INTERFACE LCD DISPLAY INTERFACE Stepper Motor
control interface card with Stepper motor and
power Supply

6

Microcontroller

kit with addon
cards (EE)

keyboard and compatible interface cards 8051
Trainer kit WITH LCD DISPLAY and IBM Key bo
ard (8
BIT MICROCONTROLLER, 8031/51/89C51/52
SYSTEM CONFIGURED FOR 89C51/52 16 bit timer /
counter, minimum 48 I/O lines (8255 PPI chip),
minimum 16 KB EPROM and RAM, serial interface
facility) With interface cards compatible with kit:
i)ADC ii)DAC iii)
Stepper motor with card iv)LCD
display interface v)Traffic light control vi)Logic
Control vii)Timer counter 8253 viii)Seven segment
display ix)Keyboard &display interface

7

Universal
Programmer

Universal Programmer (Programmable for EPROM/
Microcontroller/PIC) EPROM kit:
-

48 Pin Zip socket
with universal pin drivers to supports 8
-

pin to 48
pin DIP Package device USB interface to LAPTOP &
PC UNIVERSL DEVICE PROGRAMMER Support
2.5~6.5V device;

Adopting USB interface power
supply as well as 5V external power supply;
Transmission speed 12MHz/s via USB. Compatible
with Notebook or Desktop computer Device's
connection inspection, inspect every pins'
connection of the device; With current protecti
on
function, effectively protects the programmer and
devices. Device's connection inspection, inspect
every pins' connection of the device; 48 pins self
-
lock sockets; Working with WINDOWS 2000/
2003/XP/Vista/ WINDOWS7 (32bit) ; plastic cabinet,
small siz
e and weight light; the programming speed
has nothing to do with the computer's CPU speed;
Can self
-
detecting the device's manufacturer's
name and parts number. Add Vpp protect;Add self
-
test; plastic cabinet, small size and weight light;
Digital ICs tes
ting facility










2.

Package No.
16


Procuring Department: Electronics & Communications Engg.


Package Name

:

EC/EE/IT
-
CRO_FG_Power supply

Sr.
No

Item Name

Specifications

Last date
of Bid
Invitation

Bid
opening
date

1

Digital
storage
Oscilloscope
60MHz

Digital storage oscilloscope: 60 MHz Sample
Rates up to 1 GS/s Real Time, Rise Time : <6ns ,
Vertical resolution : 8bits , 2 Channel Models
Automatic Measurements (FFT Standard) ,
Autoset , Waveform and Setup Memories , U
SB
interface, USB device cable and Probe
-
BNC to
Crocodile, Attenuator probe, Manual.

16
-
Aug
-
2012

17
-
Aug
-
2012

12 noon

2

CRO
30

MHz
Dual channel

Analog CRO 30 MHz Deflection coefficient :
1mV/div to 20V/div Accuracy : < =±3%, Rise Time
: <

20ns, Input Impedance : 1Mohm ll 25pF Input
Voltage : Max.400V (DC +Peak AC) Modes :
Automatic or variable trigger level Source : Ch I,
Ch II, ALT, Line, Ext, Component tester, Operating
Manual, probe
-
BNC to Crocodile, fuse.


CRO 20 MHz
dual

trace
oscilloscope

Analog CRO
-

20MHz


20 MHz Oscilloscope with Component tester and
1 : 10 Attenuation Probe. Operating model Y1,Y2
Alt, CHOP, ADD, X
-
Y Deflection factor : 5mV/div
-
20V /div in 1
-
2
-
5 sequence, MAG Rate : X5 Error
<
5% , Frequency bandwidth AC : 10Hz
-
20MHz
-
3dB


DC Power
Supply

DC Power Supply, 0
-
15 V, 2A with Coarse and
Fine controls, Line and Load Regulation better
than ±0.01% , Ripple better than 1mV rms,
Overload and over heat protection


Function
Generators
1MHz

Function Generator 1MHz Frequency Range :
0.1Hz
-
1MHz, Output waveforms : sine, triangle ,
positive and negative pulse, positive and negative
ramp Output impedance : 50 ohms +/
-
10%,
Output amplitude : Not less than 20Vp
-
p (Open
circuit) 1
0V p
-
p (50 ohms load), DC offset : 0 to
+/
-
10V continuously variable, TTL /CMOS output


Function
Generators
2MHz

Function Generator 2 MHz, Frequency range : 0.
1Hz to 2MHz Function Output : DC, Sine,
Triangle, Square, Ramp, Pulse, TTL(sync), Output

amplitude : 20 Vpp, Output impedance: 50
ohms ±5% Attenuator:2 step attenuators of 20
dB, 40 dB steps And variable, DC offset
adjustment, Operating Manual, BNC to crocodile
probe


3.

Package No.
19




Procuring Department:
Safety & Fire
Engineering

Package Name :
Automatic compression testing machine

Sr.
No

Item Name

Specifications

Last date
of Bid
Invitation

Bid
opening
date

1

Automatic
compression
testing
machine

Fully automatic computer controlled compression
testing machine of 3000 kN

capacity with
automatic pace rate controller, LC of 0.01 kN,
platen size not less than 320 mm square, 400 mm
clearance between platens, including laptop,
operating softwares, printer, all accessories and
spares:
-

supply, installation, calibration and
commissioning complete.

22
-
Aug
-
2012

23
-
Aug
-
2012


12 noon


4.

Package No.
29




Procuring Department: Safety & Fire Engineering

Package Name :
Load testing of structural members

Sr.
No

Item Name

Specifications

Last date
of Bid
Invitation

Bid
opening
date

1

Steel loading
frame

Structural steel loading frame, 2.5 m × 0.5 m × 2
m (height), with adequate supports, bolted to
reinforced concrete foundation and capable of
loading 1000 kN with central deflection not
exceeding span/1000, including supply,
install
ation and testing complete. [Design to be
got approved before fabrication. Break
-
up of cost
of (a) design, fabrication & supply, (b)
construction of RC foundation, installation and
testing to be shown separately.]

01
-
Sep
-
2012

03
-
Sep
-
2012


12 noon


5.

Package No.
72


Procuring Department: Safety & Fire Engineering

Package Name :
SE
-

Laboratory Furnace


Sr.
No

Item Name

Specifications

Last date
of Bid
Invitation

Bid
opening
date

1

Laboratory
Furnace

Electrically operated furnace with effective
chamber
size of 1500mm(L)×500mm (B) × 500 mm
(H), max temp 1200
o
C, operating temp of 900
o
C
including digital temperature controller for a
temperature rise rate as per IS 3809, Cr/Al
thermocouple along with all accessories: supply,
erection and commissioning.

04
-
A
ug
-
2012

06
-
Aug
-
2012

10 am



6.

Package No.
8
1



Procuring Department
s
:
EC/EE/SE

Package Name :
Scanners

Sr.
No

Item Name

Specifications

Last date
of Bid
Invitation

Bid
opening
date

1

Flat bed
scanner

Flat bed scanner 2400×4800 optical DPI, scanner
bit depth 48 bit, 3 colour RGB, CCD image sensor
(optional), copy, scan and PDF operations with
optical character recognition (OCR), hinged lid ,
windows based software, single high speed USB
for
power and connectivity, minimum 3 years
warranty.

23
-
Aug
-
2012

24
-
Aug
-
2012

12 noon