Backyard America Pergola Specification - edoqs

farctatemountainousΠολεοδομικά Έργα

29 Νοε 2013 (πριν από 3 χρόνια και 10 μήνες)

843 εμφανίσεις


10705
-
1




SECTION
10705


EXTERIOR SUN CONTROL DEVICES


Display hidden note
s to specifier in Word 2010 by:

Click

File > Options > Display > Under “Always show these” select “Hidden Text”


©
2012 BACKYARD AMERICA


All rights reserved


PART 1

GENERAL

1.1

SECTION INCLUDES

A.

Structural Pergola Components.

B.

Pergola Footings.

C.

Pergola Canopy Systems.

1.2

RELATED SECTIONS

A.

Section 02300
-

Earthwork: Excavation and backfill.

B.

Section 03300
-

Cast
-
in
-
Place Concrete: Foundations and floor slab.

C.


Section 09900
-

Painting: Paint and stain field applied finish.

1.3

REFERENCES

A.


ASTM E 84
-

Standard Test Method for Surface Burning Characteristics of Building Materials.

B.

ASCE
7
-
10
-

American Society of Civil Engineers, Minimum Design Loads for Buildings and ot
her
structures.

1.4

DESIGN
/PERFORMANCE REQUIREMENTS

A.

Design members to withstand

wind loads in accordance with ASCE

7
-
10

and
applicable code.

B.

Design foundations in accordance with applicable code and good construction practices for the
specific structure and

site conditions.

C.

Cooperate with regulatory agency or authority and provide data as requested.

D.

Design
pergola for required allowable ground snow load in accordance with the
applicable code
.

E.


Design
pergola

in accordance with applicable
fire
code

and pro
vide data on ASTM E 84 testing
performance.

1.5

SUBMITTALS

A.

Submit under provisions of Section 01300.

B.

Product Data: Manufacturer's data sheets on each product to be used, including:

1.

Product specification sheets.

2.


Installation instructions.

C.

Shop Drawings:
Indicate assembly dimensions, locations of structural members, connections, and
general construction details, anchorages and method of anc
horage, and method of

installation
.

D.

Selection Samples: For each finish product specified, two complete sets of color
samples

10705
-
2


representing manufacturer's

full range of available colors
.

E.

Verification Samples: For each finish

product specified, two samples
representing actual product and

color.

1.6

QUALITY ASSURANCE

A.

Manufacturer Qualifications:
Single source manufa
cturer for design, engineering,
structure
pre
-
fabrication
,

and shipping.

B.

Installer Qualifications:
F
amiliar with manufacturer's

structures and installation techniques.

1.7

DELIVERY,

STORAGE, AND HANDLING

A.


All packages and pallets should be opened and inspected for hidden damage upon receipt. Any
missing or damaged components should be noted on the delivery receipt with the carrier before
accepting the shipment.

B.


Repackage components and
carefully
s
tore
in an area
protected from t
he weather
until ready for
installation.

C.

Handle materials so as to protect materials, coatings, and finishes during transportation and
installation to prevent damage or staining.

1.8

SEQUENC
ING

A.

Ensure that
footing location plans a
nd other information required for installation of products of this
section are furnished to affected trades in time to prevent interruption of construction progress.

B.

Ensure that products of this section are supplie
d to affected trades in time to prevent interruption of
construction progress.

1.9

WARRANTY

A.

Provide
manufacturer’s warrant
ies
, as appropriate, for all pergola components, canopy systems, and
finish coatings
.

1.


30 Year commercial warranty on vinyl pergolas.

2.


30 Year commercial warranty on fiberglass pergolas.

3.


10 Year commercial warranty on TrexTrim cellular PVC pergolas.

4.


2 Year commercial material/1 Year workmanship warranty on
Western Red
Cedar pergolas.

5.


30 Year commercial material/1 Year workmanship w
arranty on AmishPine pergolas.

6.


20 Year commercial finish warranty on ColorLast Process coated materials.

7.


10 Year commercial warranty on ShadeRight fixed canopy system.

8.


5 Year commercial warranty on ShadeRight motorized pergola canopy system.

9.


5 Year

commercial warranty on ShadeTree pergola canopy system.

PART 2

PRODUCTS

2.1

MANUFACTURERS

A.

Acceptable Manufacturer:
Backyard America
, which is located at:
3300 Dill Smith Dr.
;
Fredericksburg, VA 22408

Phone
: 877.489.8064 F
ax
: 877.489.2009
Email:
questions@backyar
damerica.com
,
Website:
www.backyardamerica.com


B.

Substitutions: Not permitted.

C.

Requests for substi
tutions will be considered in accordance with provisions of Section 01600.

2.2

MATERIALS

A.

Provide the following
p
ergolas

to the overall sizes and configuration indicated on the Drawings.


10705
-
3


B.

Attachment Method
.

1.


Attached to host structure.

2.


Freestanding
.

C.

Overall width (direction of beam) of pergola: _____.

D.


Overall projection (direction of rafters) of pergola: _____.

E.


Column Selection

1.

Fiberglass 8” x 8’ High Round Tapered Column with TensionRod
and Aluminum Plate
Mounting System
.

2.


Fiberglass 10” x 8’ High Round Tapered Column with
TensionRod
and Aluminum Plate
Mounting System
.

3.


Fiberglass 12” x 10’ High Round Tapered Column with
Tensi
onRod
and Aluminum Plate
Mounting System
.

4.


Fiberglass 8” x 8” x 8’ High Square Column with
TensionRod
and Aluminum Plate
Mounting
System
.

5.


Fiberglass 10” x 10” x 8’ High Square Column with TensionRod Mounting System
.

6.


Fiberglass 8” x 8” x 8’

High Square Column with 15” x
15” x 36” High Column Base and
TensionRod
and Aluminum Plate
Mounting System
.

7.


Vinyl 8” x 7’ 6” High Round Tapered Column with
TensionRod
and Aluminum Plate
Mounting
System
.

8.


Vinyl 10” x 9’ High Round Tapered Column with
Te
nsionRod
and Aluminum Plate
Mounting
System
.

9.


Vinyl 5” x 8’ High Square Column with
TensionRod
and Aluminum Plate
Mounting System
.

10.


AmishPine 6” x 6” x 10’ High Post

11.


Western Red Cedar 6” x 6” x 10’ High Post

12.


Custom TrexTrim cellular PVC
Column Wrap K
it
:
____” x ____” x ____’ High
.

13.


Custom Fiberglass Column with
TensionRod
and Aluminum Plate
Mounting System
.
:
____” x
____” x ____’ High
.

F.


Beam Component Selection.


1.


2” x 8” Fiberglass.

2.


3 ½” x 9 ½” TrexTrim
c
ellular PVC
.

3.


2” x 8” Vinyl with
Internal Aluminum I Beam Reinforcement
.

4.


2” x 8” AmishPine
.

5.


2” x 8” Western Red Cedar
.

6.


Custom Material: _______________
.

G.

Rafter

Component Selection.

1.


2” x 8” Fiberglass.

2.


1 ½” x 7 ¼” TrexTrim c
ellular PVC.

3.


2” x 8”

Vinyl with Internal Aluminum I
Beam Reinforcement.

4.


2” x 6” Vinyl with Internal Aluminum I Beam Reinforcement.

5.


2” x 8” AmishPine.

6.


2” x 6” AmishPine.

7.


2” x 8” Western Red Cedar.

8.


2” x 6” Western Red Cedar.


9.


Custom Material: _______________.

H.

Stringer

Component Selection.

1.


1 ¾”
x 1 ¾” Fiberglass.

2.


1 ½” x 1 ½” TrexTrim c
ellular PVC.

3.


1 ½” x 1 ½” Vinyl.

4.


1 ½” x 1 ½” AmishPine.

5.


2” x 4” AmishPine.

6.


1 ½” x 1 ½” Western Red Cedar
.

7.


2” x 4” Western Red Cedar.

8.


Custom Material: _______________.


10705
-
4


I.


Hardware
.

1.


All exposed hardware
to be stainless steel or aluminum.

J.

Canopy System.

1.


ShadeRight Fixed Pergola Canopy System.

a.


Overall width of fixed canopy: _____.

b.


Overall projection of fixed canopy _____.

2.


ShadeRight Motorized Pergola Canopy System.

a.


Specify fabric name and number:

_______________
.

b.


Specify
electric operation side: _______________.

3.


ShadeTree Retractable Pergola Canopy System.

a.


Specify fabric name: _______________.

2.3


FINISH

A.


Provide all pergola components (columns, beams, rafters, and stringers) with ColorLast Process
finish coating applied.

1.


Speci
fy standard color
:
Light Brown, Medium Brown, Dark Brown, Gray, White,
Black
.

2.


Specify custom

color: _______________
.

B.


Provide all pergola components (columns, beams, rafters, and stringers) without a finish coating
applied for finishing on site.

C.


Provide all
vinyl or TrexTrim cellular PVC
pergola components (columns

[vinyl only]
,
beams, rafters,
and stringers) without a finish coating applied for installation without any additional finishing

(none
required)
.

2.4


ATTACHMENTS

A.


Illustrations:

1.

Width and Projection Orientation Illustration.





2.


Component Identification Illustration.


10705
-
5





PART 3

EXECUTION

3.1

EXAMINATION

A.

Do not begin installation until supporting structures

have been properly prepared.

B.

If foundation preparation is the responsibility of another installer, notify Architect of unsatisfactory
preparation before proceeding.

3.2

PREPARATION

A.

Clean
component
surfaces thoroughly prior to installation.

3.3

INSTALLATION

A.

Install in accordance with manufacturer's instructions.

B.

Construct foundations in accordance with local codes and good construction practices for the
specific structure
and site conditions.

1.

Surface Mount on Existing Concrete Slab: Surface mount units on
existing

concrete
slab
as
indicated
in the
installation instructions
. Concrete shall conform to Section 03300.

2.

Surface Mount on New Footings: Surface mount units on
new

concrete
footings

as indicated
in
the
on the approved shop drawings. Slab requirements vary according to structure size.
Concrete

shall conform to Section 03300.

3.

Anchor bolts for surface mounted units shall be accurately set

using manufacturer’s
instructions
.

4.

Canopy Systems
: Install in accordance with manufacturer

s instruction
s
.

3.4

CLEANING

A.

Clean all surfaces and restore any marre
d surfaces to original conditions as approved by the
Architect.

3.5

PROTECTION

A.

Protect installed products until completion of project.

B.

Touch
-
up, repair
,

or replace damaged products before Substantial Completion.


END OF SECTION