UniPort - FTP Directory Listing - Ringdale

connectionviewΤεχνίτη Νοημοσύνη και Ρομποτική

17 Νοε 2013 (πριν από 4 χρόνια και 7 μήνες)

78 εμφανίσεις


Installation &

Configuration Manual


Version 1.0 May 2004


Copyright 2004 © Ringdale UK Ltd. All rights reserved. No part of this

publication may be reproduced, transmitted, transcribed, st
ored in a

retrieval system, or translated into any language or any computer

language, in any form or by any third party, without prior

permission of Ringdale UK Limited.


Ringdale UK Ltd. reserves the right to revise this publication and to ma

changes from time to time to the contents hereof without obligation to notify

any person or organisation of such revision or changes. Ringdale UK Ltd.

has endeavoured to ensure that the information in this publication is

correct, but will not accept li
ability for any error or omission.

Because of the fast pace of software development it is possible that there

will be minor differences between the manual and the program.


All trademarks are hereby acknowledged.









Accessing the Menu Options


UniPort Authorization


Additional Configuration


Associating UniPort to a SQL Database


Associating UniPort with a FaceKey System


Hiding the UniPort Drop
Down Menu


Enrolment of U




Ringdale’s Uniport uses the latest in fingerprint and face recognition technology to provide a
fast and effective way to enrol staff and visitors. The adaptable system can be used as an
electronic visitors book, using biometrics
instead of the normal pen and ink to register guests,
log their arrival and departure, as well as providing a highly secure time and attendance
system for staff.

The UniPort software is installed on a Windows PC, and the supplied USB fingerprint reader
d optional camera (used for face recognition) are connected to it. To further enhance the
functionality of UniPort, a touch panel display can also be attached if required.

The system can operate on a stand
alone PC, or over a network and can use SQL or
Microsoft Access databases (Access does not need to be installed on the PC, all required
elements are installed with UniPort).

This manual details the simple installation and configuration procedures required to get the
UniPort system running, together wi
th instructions for the enrolment of users and successful



The PC running the UniPort system will require the following specification:

Windows NT4/2000/XP Platform

32 bit PC running TCP/IP

A minimum of two USB ports

The follow
ing minimum specification is also recommended:

1.5 GHz processor

256 Mb memory

Fingerprint Reader and Camera Installation

Both the fingerprint reader and the camera (optional) connect to the USB ports on the PC.

Install the fingerprint reader and cam
era in a convenient position.

it is recommended
that the maximum length of cable used between reader/camera and the PC be 10 metres (33
feet). This is 2 active USB repeater cables of 5 metres (16.5 feet).

Ensure that the fingerprint reader, camera

and their drivers are installed before
installing the UniPort software.

The camera driver will be contained on the separate CD included in the camera’s packaging.

The fingerprint reader
U.are.U.Integrator Gold

software driver can be found on the UniPort

CD (this

be installed before the UniPort software).

Reboot the PC after the drivers are installed.

UniPort Installation


Ensure the PC has been rebooted after the fingerprint driver installation before
attempting to install UniPort.

The U
niPort software is found on the UniPort CD. Insert the CD into the PCs CD drive and
Windows Explorer

to locate the file. This will be called:


Double click on the icon and follow the on
screen instructions to complete the installat



Accessing the Menu Options

Open UniPort from the

menu of your Windows application using the following path:


The UniPort menu options are hidden by default. To access them click in the top r
ight corner
of the UniPort window, as shown below:

It might be necessary to click several times, moving the mouse slightly each time until the
exact location of the hidden button is found. The menu bar will appear at the top of the
window, as shown in

the example below:

Before UniPort can be used it will need to be licensed.

UniPort Authorization

To license this copy of UniPort, select License Information from the Help menu. This will
display the following dialog box:

Copy the
Request Key
and paste it into an e
mail clearly stating the license is for UniPort.
Send the e
mail to


Upon receipt, Ringdale will generate a license key for that code and send it to you. Copy the

onto your clipboard and in the above
License Information

dialog box click the

button. Paste the code into the
License Key

field. Click the
Activate License

button. A message will state that Uniport has been successfully authorized for use

Additional Configuration

Once UniPort has been authorized it is ready to go. However, the default setting for the
application is to use a Microsoft Access database directly on the PC running Uniport (it is not
necessary to have Access installed on t
he PC, all required components will have been
installed with UniPort). If this is the required configuration, proceed to the next chapter.

If the SQL database option is to be used, or the location of the database needs to be on a
remote PC, additional co
nfiguration will be required. It is also possible to incorporate UniPort
into Ringdale’s FaceKey biometric system if required.

Associating UniPort to a SQL Database

From the

down menu, select

and then
Locate Database
. Select


to display the following page:

Enter the SQL details into the relevant fields (this information will be supplied by your
SQL/Database administrator).

Click the

Button, then click the



A dialog box might ask if the new
settings should be used. Click

again and then click
. The connection can be checked
at any time by clicking the
button. Click

to exit the
Database Settings

NOTE: If not using SQL then the default Access database settings should not
be altered.

Associating UniPort with a FaceKey System

If the FaceKey Control Centre (Admin) tool is available, UniPort can be configured to
communicate with it. This will act as a server and maintain a central database which will be
synchronized to all
connected UniPort systems. When users are enrolled using UniPort this
information will be sent to the central database and the Server tool will keep all connected
units up to date. For more information on using the Server tool refer to the separate manual.


To configure the Server, from the

down menu select the
Server Settings

option to display the following dialog box:

The default set
Server Name / IP Address

will be (This means that the server is
on the same PC that is runnin
g the software). If you wish to connect to a server on a remote
system enter into this field the IP address of the PC that is running the FaceKey Control
Centre software.

The default set
Server Port

is 9110. This will need to be changed to match the ser
ver port
that the FaceKey software is using (this also uses the default port of 9110 so will usually not
need to be changed).

The Unit Name is the name which will be displayed in the Server Unit Manager window. If
connecting several UniPort systems Each U
nit Name should be changed to uniquely identify
the systems.


to exit this dialog box.

If the Facekey software is running then this should now report that the UniPort system is
connected, and will proceed to synchronize the database. This may tak
e a few minutes.

Hiding the UniPort Drop
Down Menu

Once any configuration changes have been made, the drop
down menu can be hidden again.

From the

menu select
Hide Menu
. The menu will disappear. To re
open the menu
follow the same procedure as de
scribed at the start of the chapter.


Enrolment of Users

There are two types of enrolment available with UniPort, registering visitors and registering
employees. Whether both need to be used or not will depend on how UniPort is being used
for each indi
vidual installation. UniPort is designed for intuitive enrolment, so users are able
to be enroled/enrol themselves without referring to instructions during the procedures.

Additional enrolment procedures are required if the optional camera and face recog
option is being used.

To start enrolment, click on the Self Enrolment button on the UniPort main screen, as shown

This will display a menu of three buttons, as shown below:

New Employee Enrolment

Click this button to display the fo
llowing dialog box:


This option is for using UniPort as a time and attendance system. Enter the name and
address for the employee and any other information that is required. Select the gender of the
employee and click

New Visitor Enrolment

ck this button to display the following dialog box:

Use this option to register visitors when they arrive. Users entered as visitors are stored in a
separate group within the database, but their details will be held permanently, so once a
regular visi
tor has been enroled, UniPort will recognize them the next time they arrive.
Effectively they will be able to clock in and out as an employee would.

Details that can be entered here for a visitor include name, the company they represent, the
/license plate number of their vehicle, and details of the people or departments
they are visiting. Select a gender and click the


Changing the Details of an Existing User

Click this button to display the following window:

This window wil
l list all users that are enroled in the UniPort database. Select this option to
change or update the
Biometric Information

for any user (for example, to enrol a new finger


if the current registered finger has been cut and can no longer be recognized). B
employees and visitors will be listed here.

Scroll down the list to find the user required, or (for use with a high volume of users) use the
search facility above. Entering an A into the
Enter Username

field will immediately pull out
only those surna
mes beginning with A. Entering the full name will display only that name.

Select the name from the list and click the

button to open up the biometric enrolment

windows for that user (what is displayed will depend on the biometric options that are bein

fingerprint, face recognition or both). Make any changes as required.

Following are the procedures for enrolment of both fingerprints and faces.

Registering a Fingerprint for a User

Note: When registering a fingerprint it is necessary to appl
y the finger to the reader
four times, allowing the software to learn to recognise each finger
(if any difficulties are
encountered with this procedure, please read the
General Advice for Fingerprint

section below

If a fingerprint reader is

fitted to the PC, the following enrolment window will open after the
user details have been completed (if changing the details of an existing user, this window will
appear as soon as the user is selected from the list):

Click the
Enrol Fingers

to display the following window:

Click on the button for the finger that is to be registered. UniPort will confirm which finger has
been selected and will then display the message:

Please Apply Your Finger Until you Hear a Beep


Place the required fi
nger onto the fingerprint reader. An image of the the fingerprint will be
shown on the screen together with the following message:

Repeat the finger application a further three times, following the on
screen prompts. At any
time during the procedure
the registration can be stopped by clicking the
Stop Enrolment



If the application of the fingerprint is unsuccessful (for example if the finger slips as it
contacts the sensor, producing a blurred image), UniPort will automatically ask for

the finger
to be presented again. In this situation the finger would have to be presented five times
instead of four to complete a successful registration.

When the process is complete the following message will be displayed:

General Advice for Fi
ngerprint Registration

Following are some tips to help achieve the most successful and reliable fingerprint


The more meticulous the approach taken with this procedure the clearer and sharper the
image will be. The stronger the quality o
f data that is stored, the more reliable and consistent
will be the recognition of the user (the actual fingerprint is not stored, only points of reference
from it). Below are some tips to help achieve this:


Ensure the fingerprint sensor is clean (use
a soft, dry cloth) before starting and that it
is regularly wiped (especially if users have particularly oily hands).


Users should have clean hands prior to the start of the procedure.


The fingerprint should cover as much of the sensor as possibl
e. Place finger directly
on the sensor without sliding across the surface.


It is recommended that each individual registers two or three fingers. There will then be a
backup print that can be used in the event of one of the fingerprints becomes temp
orarily or
permanently altered (for example by a paper cut or minor burn).


Ringdale Ltd

56 Victoria Road

Burgess Hill

West Sussex

RH15 9LR

United Kingdom

Freephone: 0800 214503

Tel: +44 (0) 1444 871349

Fax: +44 (0) 1444 870228

dale GmbH

Cochemer Straße 12

68309 Mannheim


Freephone: 0800


Tel: +49 (0) 621 7186

Fax: +49 (0) 621 7186

Ringdale Inc

101 Halmar Cove

Georgetown, Texas 78628


Freephone: 888 288 9080

Tel: +1 512 288 9080

Fax: +1 512 288

Website: http://www.ringdale.com